Superior Arms Lower

[Troublco]

I just got a new Superior lower that has the rear takedown pin detent hole bored too far in, and it appears to be slightly angled in too. I got the upper and lower together with a little fiddling (Couldn't figure out why to begin with) and then discovered that I couldn't swing them open. It was locked tight. Taking the stock off and checking everything from the back didn't help. I managed, with help, to get the halves apart after pushing out the front pin and having a friend hold the upper as I pulled on the lower, as carefully as I could. It still took material off the lug in the back of the upper. As I looked at it after seeing the material taken off the lug, I noticed that the rear pin wasn't far enough out, and wouldn't go out any further. The hole is noticeably off center towards the inside of the receiver, and as I said looks to be slightly angled. I'm sure Superior is going to take care of it, I'm just curious if anyone else has ever had this particular issue. Anyone?

[Marlin]

One of those thing I have heard of it, just never had it happen to me..