Pole is up, temporarily. I still need to order the misc items: truck/cap, halyard, cleat, gold ball etc. Leaning slightly in picture because it's not set in the sleeve yet, I need to take it back out and install all the other parts before setting it in the sleeve more permanently.

Trouble finding parts. Ended up having to use Rigid Electrical Conduit, it was $10 cheaper per stick and each one came with the couple already for that price. Only drawback to the electrical couplers, they are straight thread, not tapered pipe thread, so I had to really crank down on them with pipe wrenches and cheater bars to get everything good and tight. I had to buy two threaded bushings to connect each piece of pipe.

Parts: (home depot)

2 Inch Rigid Conduit 768499 $41.66
1.5 inch Rigid Conduit 687280 $31.69
1.25 inch Rigid Conduit 562109 $28.06
2 inch to 1.5 bushing 607324 $4.33
1.5 to 1.25 bushing 349909 $3.88
Two bags 60# of concrete $5.00 or so
One 36inch x 8inch concrete tube for footing. $10 or so
4 inch PVC pipe, already had - Free

Makes a flagpole 27 feet. I cut the top section down so it's a total of 20 feet. 27 Feet seemed a little flimsy up top and would be difficult to stand up by myself.