Ak Build Party

[DeusExMachina]

Got my kit today. Apex rocks. Everything is in bags and in great shape.

[Mule]

Crikey Bryan, I have to follow this all over the board...... I just posted on the other thread and then saw this link.

I thought the party was this weekend, so I was trying to figure a way to get you my spot welder. If you guys want to use it I can meet you on Sunday at I-25 and HWY 34. I will be at the Best Western for a WWII reenactment meeting at 2:00. It still needs to be modified, but I know you and Jim can do it pretty easily. Let me know if you want to use it.

Also, if you need an extra press and have a truck, you can come down and grab mine. I will bring it home from work, but you have to give me a days notice. I don't drive the big Dodge much these days, so it stays at work with my press.....

asta
Greg 303-916-7051

[bryjcom]

OK gentlemen. We need to do a roll call so we can get an idea of who's comming. Also let us know what kind of tooling your bringing if any. So sound off here and let us know.

There will be a few things that we could use that would make things go a lot quicker.

1. Dremmel tool with cut off wheels and/or grinders. These will be needed for fitting and demilling you kits. It would be best to get a headstart on demilling you kits and getting the rivet heads ground off and if possible removal of the rivet and old receiver.

2. Punchs to remove rivets and pins. If you have them bring them. That way people aren't standing around waiting for them.

3. Drill bits. Again same thing, so people aren't standing around.

4. Trigger gaurd jig. I have one but it is "difficult" to use. If someone has one BRING IT!!!

5. Spot welder. Mule will be getting a call here soon and I will try to meet up with him but I may not be able too. It would be easier to have one of you guys bring one already modified.

6. Any other "makes building an ak easier tool" would be helpful. Rivet locators, barrel presses, trunnion jigs, ect, ect......



Time will be July 24th Saturday from 9AM to 2ish at Jim's house in Windsor.

PM me for Jims address if you are coming. You can call me also Bryan 970-690-7614

[enthusiast]

I cannot make this one. Hopefully there will be another one.

[DeusExMachina]

I'm in. I have drill bits, punches somewhere, and a bunch of dremel stuff but my dremel died. I also have a 5.45 GO gauge.

And beer! If beer is OK..

[bryjcom]

I'm in. I have drill bits, punches somewhere, and a bunch of dremel stuff but my dremel died. I also have a 5.45 GO gauge.

And beer! If beer is OK..

I cool with beer. As long as it doesn't turn into one of my drunken high school parties.

[OneGuy67]

I'm still in! Just need a time to start this shin ding.

I have a rivet tool, trigger guard jig, bits and a crappy dremel. I can bring my table grinder if it is needed and some beer as well. I have several kits and receivers all ready, but really want to ask questions, observe and get a feel for the whole thing.

Jeff

[DeusExMachina]

I cool with beer. As long as it doesn't turn into one of my drunken high school parties.

I'll leave the keg at home.

beer and guns is a bad idea but these won't really be guns for awhile anyway.

[bryjcom]

I'm still in! Just need a time to start this shin ding.

I have a rivet tool, trigger guard jig, bits and a crappy dremel. I can bring my table grinder if it is needed and some beer as well. I have several kits and receivers all ready, but really want to ask questions, observe and get a feel for the whole thing.

Jeff

Bring all of it. Table grinder may or may not be used that much. Jim has one in any case.

[arz]

I'm out. My kid's outpatient surgery turned into 3 days/2 nights in the hospital and I had to take him to the ER last night for 6 hours to get some fluids in him.

Have fun. Hope to make the next one.