Driving myself nucking-futs planning & re-planning this project, a spin-loop I'm usually pretty good about avoiding. In any event, refinishing the garage top-to-bottom, paint, storage, work area(s), etc. I'm going with "bright white and flat" paint on the walls with as much washability/durability as I can find, I have one wall that is poored concrete that I am going to stain white and then there is the floor... Was going to do the traditional epoxy gray/silver with flakes and probably still will but...looking at some of the products on the market I'm now spinning myself into indecision...
Some questions for those of you that have done your own garage floor;
1. Have you found off-the-shelf do-it-yourself kits to be of reasonable quality (durable) and affording the "look" desired (i.e. met your expectations)? Better off if I go to a pro for this job?
2. Was thinking Home Depot's off-the-shelf Behr product, maybe Rustoleum but...seeing some good products on the web as well, any mfgr or products you fella's would recommend (or avoid)? Do I stay away from these "kits" that I find at the big box stores?
3. Did you go traditional base color and flake or did you do something a bit more exotic in color/flake or other?
Will take any comments / advice I can get as I'm doing the prep work this week and plan to do the Epoxy floor next Thur thru Sunday. Thx
I really like this product in the first pic but...will probably end-up with something like the 2nd pic if I go off-the-shelf.
PIC 1:
PIC 2:
![]()




Reply With Quote

