Need some scope ring help??

[dtbighit]

Was wondering if anyone can tell me if they have adjustable elevation rings,or bases?i have a burris windage adjustable base,but i need elevation,i run way out of adjustment at 1000yds,and am sick of using "SWAG",the scope is a Bushnell elite 3200 tactical,not bad glass for the 100 bucks i paid,any help would be great,thanks...........

[C Ward]

Going to assume You have the old Redfield style base and rings , two screws hold the ring in the back and the front twists in .

To get more usable elevation from Your scope You'll need to go to a sytem that has angle built into the base . The easiest way is to go to a picatinny rail base and rings . There are many manufacturers that make this style and they can be had with 0 moa , flat , to 40 ish moa , angled , built in to the base .

This allows you to zero more towards the bottom of erector travel instead of the middle .

Depending on what rifle You have will determine availability .

[dtbighit]

Wow,thanks for the fast reply,my base is a Burris,and my rings are Burris signature(dovetail).My rifle is a Rem700 .308 sps varmint,26in heavy barrel,Bell and Carlson tactical stock etc..etc..scope is good till roughly 800yds,then swag kicks in,lol,thanks for the help!!!!

[C Ward]

Remington is the one that has the most options available , Badger , Seekins , Warne are a few . A 20 moa base should be enough .

[The1andOnlyKC]

EGW makes a good one, so does badger.

Here is a link to the EGW 20 moa base at Midway.

EGW 20 MOA Base Rem 700 Short Action

I would guess EGW would have one in stock so you might want to try contacting them. Their customer service is great. A lot of people are running these EGW bases with Burris XTR rings with good luck. I run the EGW/Burris set up on my Savage 12 in 223 and I like it.

All of my Rem 700's are Badger bases with badger rings

[gcrookston]

I'm not familiar with EGW. They look like a bargain. I might have to try them on my next rifle.

I've been using Ken Farrell Mounts on my bolt guns for years and have found them excellent. I use both the Leopold Mk4 and the Burris XTR rings (which ever happens to be cheaper that day - the quality is the same)


http://www.kenfarrell.com/scan/fi=products/st=db/co=yes/sf=category/se=Remington%20700/op=eq/sf=prod_group/se=Scope%20Mount/op=eq.html?id=Xa8LCzne