My First Build!

[CrufflerSteve]

I just finished an AMD-65 and had to take it to the range. Went to the south site. It sent 150 rounds downrange without a failure. A real AK!



This is a great quality kit I got years ago. Looked unused.

For the evil 922R compliance I used:

NDS receiver. Waffenworks had a special om them a while ago.
Tapco gas piston.
Tapco single hook G2 FCG. (3 parts)
Ak-Builder Extended Muzzle Brake - It looks more like the original than the Tapco

I used a Yugo sling swivel for the rear.

Robert at BP Tactical did a perfect job of blind pinning the brake so it is not an SBR.

I added an MPK2 side rail from Collectors Source DFW. It is nice. I'm clumsy with a Shepard's Crook to retain the FCG and wanted to use the RSA retaining plate. The side rail works from internal screws which would have obstructed the plate. I moved the rail 1/4" forwards which let it work. It needed a little grinding to work I also had to grind a slot in the plate but it holds the FCG, especially after 150 rounds.

The front handguard took a little fitting. When I pressed the barrel the headspace was perfect with the pin hole so no work there, just press the pin back in.

I really thought I'd lost it doing final assembly last night. The Tapco Single Hook G2 was defective! After a couple of hours of struggle I opened another one and the dimensions were different! I popped the new one in a couple of minutes and it worked. I'd heard about a G2 recall but never read it. There are bad ones. I do like them. The hollow tube makes installing the trigger group a snap. I had no trigger slap.

I did a rough adjustment on the scope but it didn't work at all at the range. It needs more adjustment. I used the iron sights and hit the target.

I messed the pad up trying to remove it. I'll either fix it or replace it.

Real fun. I have a couple of Romy G2 kits almost ready and will be doing those next.

Steve



'

[Big Wall]

Very cool. It looks good!

[jreifsch80]

Your amd turned out very nice steve! Maybe you should get your two romys built too then get together and do some refinish work. Have you heard how that alumahide is?

[TEAMRICO]

Huh, me and Jordan were there today (Friday) from about 12-1:30.
Dark grey Nissan Titan.

[CrufflerSteve]

Huh, me and Jordan were there today (Friday) from about 12-1:30.
Dark grey Nissan Titan.

I have an old red Tacoma with a camper shell. I went south aways. I would have stayed longer but the wind was strong and cold so most of my guns were left unfired.

Steve

[MONTROSE1911]

May I ask how much you have invested? I'm thinking about trying a kit. I would love to attend a build party.