The post whore thread.

[wyome]

What the? You scared?

Nah.... was meeting wifey for late lunch, so I had places to be

[ChickNorris]

Im teasing. I heard that I had just missed you & was disappointed at the news.

[Great-Kazoo]

Im teasing. I heard that I had just missed you & was disappointed at the news.

There's always tomorrow, or a shooting event.

[Irving]

Im teasing. I heard that I had just missed you & was disappointed at the news.

Don't worry, we know that he likes Indian Tacos from Santiagos on Wednesdays and sometimes Mondays. You can always catch up with him there.

[OtterbatHellcat]

Got the bumper mounted up and lights installed, pre wired for however the hell I end up doing this. I wanted to run ground activated switches to relays for load....and having the relays hot off ignition breakers. Not much load with these circuits, so is it really warranted?

[Irving]

I would check the local code just to be sure.

[Great-Kazoo]

Got the bumper mounted up and lights installed, pre wired for however the hell I end up doing this. I wanted to run ground activated switches to relays for load....and having the relays hot off ignition breakers. Not much load with these circuits, so is it really warranted?

Easier to do it now, instead of the ground @ 1 in the a.m if a circuit took a shit. .



BTW: that looks like a clean unit you're building.

[wyome]

Im teasing. I heard that I had just missed you & was disappointed at the news.

Same here... always cool to meet forum ppl

[Erni]

Hit the range today. The 6.5 CM is still shining. Fired 4 shots at 100yrds. Shot 1 was almost 3in high, but actually it was within 1/2 of where it should be. Shot 2 was 1" high, but actually 1" low of where it should be. How? I check strelok again and it's 3 clicks DOWN. Ok, dial it down 6 clicks. Shot 3 and 4 were 1/2" low of poa. I think I need to go 2 clicks low at this temp and zero. Shooting off bags feels like cheating, but will go on until all 4 shots are where they need to be.
Now the AR, that sucked. 4" pattern at 100. Move to 25, and got 5 out of 10 into a quarter sized group 1.5" low. Damn, my shooting at 4x at 100 sucks.

[OtterbatHellcat]

Easier to do it now, instead of the ground @ 1 in the a.m if a circuit took a shit. .



BTW: that looks like a clean unit you're building.

Thank you.


If I ran key hot breakers to 87 and looped to 86, use 85 ground switched and 30 is the load. No load has either power or ground until the switch is activated and the only hot to the switch panel is the piggy backed hot for pilot illumination.