Close
  1. #17571
    Bang Bang Ridge's Avatar
    Join Date
    Dec 2007
    Location
    Cedar Park, TX
    Posts
    8,307

    Default

    At work. Someone did a patch last night, and now email, phones and Internet is down.

  2. #17572
    Machine Gunner Goodburbon's Avatar
    Join Date
    Nov 2011
    Location
    Cotopaxi, CO
    Posts
    1,434

    Default The post whore thread.

    Well, they patched the holes that were allowing that stuff through obviously.


    Sent from my iPad using Tapatalk HD
    The people lived in fear of reprisal from their leaders, children cried themselves to sleep, all hope was lost... and then there was a whale.

    www.bugoutwhale.com

  3. #17573
    The Red Belly TheBelly's Avatar
    Join Date
    Mar 2011
    Location
    Leavenworth, KS
    Posts
    6,057
    Blog Entries
    1

    Default

    Quote Originally Posted by HoneyBadger View Post
    Give me all your best advice and i'll read it in the morning.


    ta ta for now!

    Dont mix oil and water.
    Just doing what I can to stay on this side of the dirt.

  4. #17574
    Carries A Danged Big Stick buffalobo's Avatar
    Join Date
    Oct 2009
    Location
    Hoyt
    Posts
    15,830

    Default

    Quote Originally Posted by BuffCyclist View Post
    Oh YOUU had the cough, nevermind, my bad.

    I have a circular saw, but what I really want now is a miter saw as I seem to have some difficulty getting square cuts on the ends of 2x4s. My Fiancee wants me to put up crown molding eventually, so I figure I'll be able to get the miter saw for that. Yes, I know there are special crown molding jigs. Which I plan to get AFTER I get the miter saw, use it, and say its not the right tool for the job.
    Next time you need to cut 2x4 or even up to 2x10, use a speed square($6-$15 @ Lowes, lots of uses, money well spent) as a guide, flange against side of board, adjacent edge as guide.

    When you get ready to put up crown, post up on the forum, lots tips/tricks for your soon to be new miter saw. No crappy expensive, useless jigs needed.
    If you're unarmed, you are a victim


    Feedback

  5. #17575
    Gives a sh!t; pretends he doesn't HoneyBadger's Avatar
    Join Date
    Feb 2012
    Location
    C-Springs again! :)
    Posts
    14,803
    Blog Entries
    1

    Default

    I'm in such a state of shock that I need to write a post about this before I forget or something happens:


    Yesterday I ordered some AR parts from Palmetto State Armory.


    Yesterday I got a shipping notification.


    This morning the box is on its way here (checked via the tracking #)



    WHHHHHHHAAAAAAAAAATTTTTTT??! This must be a fluke! PSA always takes 2-3 weeks to ship out orders!
    My Feedback

    "When law and morality contradict each other, the citizen has the cruel alternative of either losing his moral sense or losing his respect for the law." -Frederic Bastiat

    "I am a conservative. Quite possibly I am on the losing side; often I think so. Yet, out of a curious perversity I had rather lose with Socrates, let us say, than win with Lenin."
    ― Russell Kirk, Author of The Conservative Mind

  6. #17576
    Fire Crotch
    Join Date
    Nov 2009
    Location
    Charlottesville, VA
    Posts
    6,508

    Default

    Quote Originally Posted by buffalobo View Post
    Next time you need to cut 2x4 or even up to 2x10, use a speed square($6-$15 @ Lowes, lots of uses, money well spent) as a guide, flange against side of board, adjacent edge as guide.

    When you get ready to put up crown, post up on the forum, lots tips/tricks for your soon to be new miter saw. No crappy expensive, useless jigs needed.
    Thanks for the advice, I might just have to pickup a speed square today at lowes.

    Quote Originally Posted by HoneyBadger View Post
    I'm in such a state of shock that I need to write a post about this before I forget or something happens:


    Yesterday I ordered some AR parts from Palmetto State Armory.


    Yesterday I got a shipping notification.


    This morning the box is on its way here (checked via the tracking #)



    WHHHHHHHAAAAAAAAAATTTTTTT??! This must be a fluke! PSA always takes 2-3 weeks to ship out orders!
    Honestly, I'm surprised you placed an order with PSA. I will never again do business with them, no matter how good of a deal they are running. Heck, they could be giving away $5 AR's with free shipping and 10k rounds of ammo included for all I care and I wouldn't buy from them.

  7. #17577
    I cried and got a title waxthis's Avatar
    Join Date
    Nov 2008
    Location
    Windsor,West side. But NOT on the hill.
    Posts
    5,613

    Default

    Burp.
    "An individual is only entiteld to one's rights as long as one respects the rights of others."...R.F.

  8. #17578
    Gives a sh!t; pretends he doesn't HoneyBadger's Avatar
    Join Date
    Feb 2012
    Location
    C-Springs again! :)
    Posts
    14,803
    Blog Entries
    1

    Default

    Quote Originally Posted by BuffCyclist View Post
    Thanks for the advice, I might just have to pickup a speed square today at lowes.
    Yes, definitely worth the money... and it will last you forever. I got one in high school when I worked construction and I've been using it for various projects ever since.


    Honestly, I'm surprised you placed an order with PSA. I will never again do business with them, no matter how good of a deal they are running. Heck, they could be giving away $5 AR's with free shipping and 10k rounds of ammo included for all I care and I wouldn't buy from them.
    Yeah, I've always had good experiences with PSA. I've spent several thousand dollars on their stuff and don't have any complaints. Last December in the middle of the hype, I ordered a 3 LPKs from them and they sent me 4 by accident. I called and they just told me to keep the extra. When the QD bipod mount I ordered last year was out of stock and it didn't look like it was going to ever come in, they just sent me a different one - a nicer one that cost about 3x as much.

    I've ordered 5 stripped lowers from them and they were all top notch quality and fit very tightly with every upper I own.

    I know some people have had really crappy experiences, but it always seemed like they went out of their way to make things right for me. I always ordered with the understanding that it would probably take 2-3 weeks to ship, so it wasn't ever a surprise.
    Last edited by HoneyBadger; 06-04-2013 at 08:34.
    My Feedback

    "When law and morality contradict each other, the citizen has the cruel alternative of either losing his moral sense or losing his respect for the law." -Frederic Bastiat

    "I am a conservative. Quite possibly I am on the losing side; often I think so. Yet, out of a curious perversity I had rather lose with Socrates, let us say, than win with Lenin."
    ― Russell Kirk, Author of The Conservative Mind

  9. #17579
    Mr Yamaha brutal's Avatar
    Join Date
    Jul 2011
    Location
    Unincorporated Douglas County, CO
    Posts
    13,935

    Default

    Quote Originally Posted by HoneyBadger View Post
    Yeah, I've always had good experiences with PSA. I've spent several thousand dollars on their stuff and don't have any complaints. Last December in the middle of the hype, I ordered a 3 LPKs from them and they sent me 4 by accident. I called and they just told me to keep the extra. When the QD bipod mount I ordered last year was out of stock and it didn't look like it was going to ever come in, they just sent me a different one - a nicer one that cost about 3x as much.

    I've ordered 5 stripped lowers from them and they were all top notch quality and fit very tightly with every upper I own.

    I know some people have had really crappy experiences, but it always seemed like they went out of their way to make things right for me. I always ordered with the understanding that it would probably take 2-3 weeks to ship, so it wasn't ever a surprise.
    They shorted me an LPK on one shipment and sent another right out no questions asked. Never had any issues with them. I did have a lower that was very difficult to fit to their uppers. Any other upper was fine and their uppers would fit any other lower fine. Weird. Just enough on opposite sides of the spec to be a pain.
    My Feedback
    Credit TFOGGER : Liberals only want things to be "fair and just" if it benefits them.
    Credit Zundfolge: The left only supports two "rights"; Buggery and Infanticide.
    Credit roberth: List of things Government does best; 1. Steal your money 2. Steal your time 3. Waste the money they stole from you. 4. Waste your time making you ask permission for things you have a natural right to own. "Anyone that thinks the communists won't turn off your power for being on COAR15 is a fucking moron."

  10. #17580
    Fire Crotch
    Join Date
    Nov 2009
    Location
    Charlottesville, VA
    Posts
    6,508

    Default

    Quote Originally Posted by brutal View Post
    They shorted me an LPK on one shipment and sent another right out no questions asked. Never had any issues with them. I did have a lower that was very difficult to fit to their uppers. Any other upper was fine and their uppers would fit any other lower fine. Weird. Just enough on opposite sides of the spec to be a pain.
    They shorted me a Geissele trigger and acted like they shipped it, as there were no notes on my account that they didn't ship it. Took them nearly 2 months if I recall to get it to me, calling weekly because they kept telling me it was in-stock and would ship that day (so I'd call a week later when I didn't have it to get a tracking number, they'd say it never shipped but it was in-stock and they'd send it out that day).

    Anyways, there's a huge thread on PSA and this is not it. So before a mod merges these, shall we get this whore of a thread back on track?!