Just finished 80 rommy g

[zteknik]

I just finished an 80 rommy g friday,and just had the camera today

Its an all matching number kit with the paper still in the barrel
I picked up a bunch of kits when they went for $75 or so depending who you got them from(and I forgot who i got them from)

This one was stuffed in a box of other stuff that i just recently pulled out of the closet

I used an akbuilder flat and rivets
Finished her off in maganeese park.

All headspaced and ready for a test run.I might have to wait till next weekend to get out to test fire.There isnt too much for free ranges where I'm at and there usualy member first ranges.So i have to wait for my buddy so we can go up to his property

[StagLefty]

Nice job !!!

[blacklabel]

Looks great. Nice work.

[jreifsch80]

Looks awesome Bob, I especially like the russian bakie

[zteknik]

Thanks guys!
Sooner or later I will figure out how to use this dern camera!!
It has so many different settings and such i just might have to go to tech school just to learn how to use it!
But when I do figure it out I'll post up some pics of a few of my personal favorite battle rifles-Garands and Springfeilds!

[jreifsch80]

hey Bob, do you still have a good source for those 7.62 bakies?

[spleify]

Very nice!

[zteknik]

hey Bob, do you still have a good source for those 7.62 bakies?

Not at the moment-looks like my source has run dry
I have a few other guys im going to try when I'm able to,but there no way near in price as my last guy so i might be stuck with getting them off the boards for now-the prices on the boards would be about the same when you throw in shipping from the other guys
We realy need to get Bogdan off his duff!!

[zteknik]

Ok-time for a range report!!!
I took her out today
First batch of ammo ran fine-1 30 rdr it was the pre wolf ammo that came in the white box,I honestly cant remember the name-but I think it was military,had the sealed primers and neck
Then I swithed over to the wolf ammo-thats where i started to get some jams and feed hangups

I took it apart and noticed my trigger pin walked out of the hole a bit-the retainer wasnt in the slot-so i popped it back in making sure the retainer was snugin the slot-its one of those one peice ones that the selector lever goes thru the top hole
I lubed up the feed ramp a bit-felt a little rough-then locked and loaded another mag
Lo and behold it ran like a sewing machine afterwards!!!

I realy wasnt checking for groups as much as i was for function,now it passed the break in test-musta ran about 150 rds of wolf after my first mag without a hitch!!(and even bump fired a full mag! )

Next its time to take her out for sighting in and grouping @100 yrds
I'll try and post up the targets when i get it out again

[jreifsch80]

Sounds great bob! What fcg are you using? Tapco? Zach spezialny? No wonder I haven't heard from you this weekend, we need to catch up sometime, I need you to help me source some dirt cheap type 3 pattern barrel parts for a K.I.S.S. Type 3 pattern tabuk style build

Ok-time for a range report!!!
I took her out today
First batch of ammo ran fine-1 30 rdr it was the pre wolf ammo that came in the white box,I honestly cant remember the name-but I think it was military,had the sealed primers and neck
Then I swithed over to the wolf ammo-thats where i started to get some jams and feed hangups

I took it apart and noticed my trigger pin walked out of the hole a bit-the retainer wasnt in the slot-so i popped it back in making sure the retainer was snugin the slot-its one of those one peice ones that the selector lever goes thru the top hole
I lubed up the feed ramp a bit-felt a little rough-then locked and loaded another mag
Lo and behold it ran like a sewing machine afterwards!!!

I realy wasnt checking for groups as much as i was for function,now it passed the break in test-musta ran about 150 rds of wolf after my first mag without a hitch!!(and even bump fired a full mag! )

Next its time to take her out for sighting in and grouping @100 yrds
I'll try and post up the targets when i get it out again