Close
Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Grand Master Know It All DOC's Avatar
    Join Date
    Dec 2008
    Location
    Lakewood
    Posts
    2,880

    Default Wanted: Old Pentium CPU working or not.

    Preferably not because I'm going to break it and get at the printed board underneath the epoxy on the bottom. Then I am going to sink that pretty little pretty thing into some clear epoxy and make a trophy for something.
    If you have one or a printed micro circuit I would really appreciate it.
    Thanks in advance.
    Who are you to want to escape a thugs bullet? That is only a personal prejudice, ( Atlas Shrugged)
    "Those that don't watch the old media are uninformed, those that do watch the old media are misinformed." - Mark Twain

  2. #2
    If I had a son he would look like....Ben SideShow Bob's Avatar
    Join Date
    Mar 2010
    Location
    SE Aurora
    Posts
    7,120

    Default

    Got an older HP Pavilion if you want to come get it. From 1995 or so, I think it has a pentium processor.

  3. #3
    Grand Master Know It All DOC's Avatar
    Join Date
    Dec 2008
    Location
    Lakewood
    Posts
    2,880

    Default

    Could you do me a favor and pull the processor and look underneath for a black epoxy?
    I had one the other day and I should have kept it but instead I shot it and most likely left it at the buffalo creek site since I didn't find it in any of the stuff that I took home.
    I would be happy to make take it off your hand if its what I need.
    DOC.
    Who are you to want to escape a thugs bullet? That is only a personal prejudice, ( Atlas Shrugged)
    "Those that don't watch the old media are uninformed, those that do watch the old media are misinformed." - Mark Twain

  4. #4
    Grand Master Know It All DOC's Avatar
    Join Date
    Dec 2008
    Location
    Lakewood
    Posts
    2,880

    Default

    Also, just in case. Does anyone know a way to desolve the covering on these CPU's without hurting the metal under it? I was thinking a carb cleaner solution but I don't know and it might be easier to just go with plan A.
    Who are you to want to escape a thugs bullet? That is only a personal prejudice, ( Atlas Shrugged)
    "Those that don't watch the old media are uninformed, those that do watch the old media are misinformed." - Mark Twain

  5. #5
    If I had a son he would look like....Ben SideShow Bob's Avatar
    Join Date
    Mar 2010
    Location
    SE Aurora
    Posts
    7,120

    Default

    I'll check tomorrow and let you know.

  6. #6
    Grand Master Know It All DOC's Avatar
    Join Date
    Dec 2008
    Location
    Lakewood
    Posts
    2,880

    Default

    Thank you.
    Who are you to want to escape a thugs bullet? That is only a personal prejudice, ( Atlas Shrugged)
    "Those that don't watch the old media are uninformed, those that do watch the old media are misinformed." - Mark Twain

  7. #7
    Fallen Member
    Join Date
    May 2010
    Location
    Smyrna, GA
    Posts
    6,748

    Default

    Quote Originally Posted by DOC View Post
    I had one the other day and I should have kept it but instead I shot it and most likely left it at the buffalo creek site since I didn't find it in any of the stuff that I took home.

    DOC.






    Really?

  8. #8
    Grand Master Know It All DOC's Avatar
    Join Date
    Dec 2008
    Location
    Lakewood
    Posts
    2,880

    Default

    What?
    Who are you to want to escape a thugs bullet? That is only a personal prejudice, ( Atlas Shrugged)
    "Those that don't watch the old media are uninformed, those that do watch the old media are misinformed." - Mark Twain

  9. #9
    Gourmet Catfood Connoisseur StagLefty's Avatar
    Join Date
    Oct 2007
    Location
    Maine
    Posts
    6,638

    Default

    Start of the matinee
    Don't pick a fight with an old man. If he is too old to Fight, he'll just kill you.

  10. #10
    Really is Llama Not_A_Llama's Avatar
    Join Date
    Jun 2004
    Location
    South Denver
    Posts
    992

    Default

    Headache begins... Now.
    9mm - because they don't make a 9.1mm

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •