Close
Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Bang Bang Ridge's Avatar
    Join Date
    Dec 2007
    Location
    Cedar Park, TX
    Posts
    8,307

    Default

    Well, Bushmasters are crap, and Colts are out of spec.

  2. #2
    Industry Partner BPTactical's Avatar
    Join Date
    Dec 2009
    Location
    North Metro
    Posts
    13,916

    Default

    Quote Originally Posted by Ridge View Post
    Well, Bushmasters are crap, and Colts are out of spec.
    Correction-NEW Bushmasters are crap. I have had quite few earlier Bushy's and they were great rifles.
    Armalites are good rifles, they are the originator of the design. The only problems I have seen with Armalites is the occasional FTF due to tight tolerances.
    The most important thing to be learned from those who demand "Equality For All" is that all are not equal...

    Gun Control - seeking a Hardware solution for a Software problem...

  3. #3
    Varmiteer
    Join Date
    Feb 2008
    Location
    Eastern Wyoming
    Posts
    574

    Default

    delete
    Last edited by HBARleatherneck; 07-21-2012 at 12:08.

  4. #4

    Default

    I keep hearing negative things about Bushmasters but no one ever really explains why they just say they are junk. So Bert you mentioned that the newer ones are no good, what/when changed things because I thought at one time they were pretty good rifles?
    Certified NRA Instructor, ask me about CCW classes

    /l , [____],
    l----L -OlllllllO-
    ()_) ()_)------)_) Jeep ΜΟΛΩΝ ΛΑΒΕ

    My Feedback + 50 lost during the site crash

  5. #5
    Guest
    Join Date
    Mar 2007
    Location
    Outside People's republic of boulder
    Posts
    803

    Default

    My Armalite works great. Good fit and finnish

  6. #6
    Diesel Swinger Graves's Avatar
    Join Date
    Jan 2009
    Location
    Brighton
    Posts
    3,531

    Default

    I love my Colts.
    -Mike

    "I have to return some video tapes"

  7. #7
    SSDG
    Join Date
    Mar 2011
    Location
    Enid, OK
    Posts
    84

    Default

    I've had my Bushmaster for almost 2 years now and put about 2500 rounds through with zero problems.

  8. #8
    If I had a son he would look like....Ben SideShow Bob's Avatar
    Join Date
    Mar 2010
    Location
    SE Aurora
    Posts
    7,120

    Default

    Quote Originally Posted by Daniel_187 View Post
    My Armalite works great. Good fit and finnish
    So, your Armalite was made In Finland ?

  9. #9
    Guest
    Join Date
    Mar 2007
    Location
    Outside People's republic of boulder
    Posts
    803

    Default

    Quote Originally Posted by SideShow Bob View Post
    So, your Armalite was made In Finland ?
    Well duh. LOL Hannu hooked me up with a JP trigger and put it in too. So I guess its half finn LOL
    Last edited by Daniel_187; 08-28-2011 at 15:06.

  10. #10
    Industry Partner BPTactical's Avatar
    Join Date
    Dec 2009
    Location
    North Metro
    Posts
    13,916

    Default

    Quote Originally Posted by spleify View Post
    I keep hearing negative things about Bushmasters but no one ever really explains why they just say they are junk. So Bert you mentioned that the newer ones are no good, what/when changed things because I thought at one time they were pretty good rifles?
    In 07 or 08 Bushmaster was acquired by Cerebus Holdings. Since then QC has slipped. When I worked at the shop late model Bushys were one of the most frequently brought in with issues.
    Stupid stuff like loose pistol grips, 2 gas rings instead of 3, missing buffer detents, missing safety detents, weak staking of the gas key causing it to loosen, loose buffer tubes and such.
    Just poor quality control.
    Bushmaster is actually shutting down operations and moving to one of the Carolinas IIRC.
    Too bad, they were great rifles.


    My Colts have been flawless as well.
    The most important thing to be learned from those who demand "Equality For All" is that all are not equal...

    Gun Control - seeking a Hardware solution for a Software problem...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •