Fixed!!!!!

Just got to get it out to the range and verify! I took the roll pin out and I fully expected the spring to pop out and fly across the room. It didn't the ejector came out once the roll pin was removed. Then without warning, the spring popped out. I soaked the bolt, dried it and blew air through the openings. Lubed and reassembled.

Seems to be working now!

Thanks for your help!

Quote Originally Posted by BPTactical View Post
Might be a little tricky to get out, when you get it out check the ejector and its bore for any burrs and address them as needed.
Probably wedged a piece of brass or such, causing it to stick.