AR options reccommendations

[223kev]

I'm going to build my first AR and so far, here are my major wants:

18" barrell light weight
Mid-lentgh free float Hand Guard
multi position stock
No front sight - will have scope mounted

I have a PSA stripped lower receiver ready for the platform and a 20 round PMAG ready to go but that's about it. It isn't going to be a high dollar build and will take most of the year to complete.

This is going to be a general purpose AR with the most use coming from predator hunting. My 13 and 12 yo boys are going to be behind it as well so I have to consider them. Just on that, I'm thinking 223 since it will be the cheapest to reload. We will probably do a camo paint job so that is something to consider as well.

I'm going to hit the Tanner show this weekend in Loveland to see what they have so if anyone can recommend some decent equipment based off of my wants, that would be great!

Thanks,
Kevin

[ray1970]

Pmags come in 20 and 30 rounders, not 15. The 18" barrel is a good idea but just about every one I have seen has used a rifle length gas system so getting a mid-length handguard on it will either be difficult or at least look kind of funny.

This is a great place to get advice, ideas, and opinions.

If the Loveland Tanner show is anything like the Denver one, you might be a little disappointed with the selection and prices of AR parts and accessories.

Good luck with your upcoming build.

[cstone]

I assume by your location you have checked on what is available at Jensens. If you get down to Denver you may want to stop by Bowers Tactical.

18" seems off to me, as I like 16" or 20" but to each their own.

This board is an excellent resource as there are some very knowledgeable, helpful individuals around here.

Welcome to the addiction. ARs: They are all about the accessories : )

[BPTactical]

Start simple, carbine or rifle length. Learn the platform.
Your not going to find any deals at a show.
+1 on Bowers, Mike and Rob know their stuff and are industry partners here as well.
You might want to give Bear Arms a yell as well, they are in Windsor.

[Great-Kazoo]

If you don't find what you're looking for or would like some assistance, there are a fair amount of board members literally within 10 blocks of each other, here on the "east side" of 25.

[Kaiser.Shooter]

DPMS makes 18" Mid-Length gas barrel:

DPMS Mini SASS Barrel AR-15 5.56x45mm NATO .920" Muzzle Diameter 1 in 8" Twist 18" Fluted Stainless Steel Black Teflon Pre-Ban

http://www.midwayusa.com/product/688...teflon-pre-ban

[TriggerHappy]

Just curious, but why 18" and not 16"?

[223kev]

Just curious, but why 18" and not 16"?

When I first started looking at options, I couldn't decide between 16" or 20". The 18" popped up as an option and I thought a perfect split for the decision. Have had my mind set on that since then but it sounds like it might be tough to get that and a mid length paired up.

[ray1970]

When I first started looking at options, I couldn't decide between 16" or 20". The 18" popped up as an option and I thought a perfect split for the decision. Have had my mind set on that since then but it sounds like it might be tough to get that and a mid length paired up.

Maybe not as tough as I thought. While I am not a huge fan of DPMS, they do have a good reputation for having accurate barrels. Kaiser.Shooter was kind enough to point this one out.

DPMS makes 18" Mid-Length gas barrel:

DPMS Mini SASS Barrel AR-15 5.56x45mm NATO .920" Muzzle Diameter 1 in 8" Twist 18" Fluted Stainless Steel Black Teflon Pre-Ban

http://www.midwayusa.com/product/688...teflon-pre-ban

[223kev]

If you don't find what you're looking for or would like some assistance, there are a fair amount of board members literally within 10 blocks of each other, here on the "east side" of 25.

I appreciate that Jim! Any help and direction on this is great.