Welcome to the Colorado AR-15 Shooters Club Discussion Forums.
Thanks, Skully. I might take you up on those. I have a feeling I am going to have to buy an optic of some sort and then play around with different mounts until I find one that works.
Originally Posted by ray1970
Just let me know, they are not going anywhere. I found with my Trijicon reflex on top of the VLTOR it it is not quite 1/3 co witness and that cool triangle dot blocks out the front sight and can barely see through the back so I did a ARMS QR.
If you use the MICRO it is too low like the photo from Islandermyk above you just need a hair height added. The smallest mount is about 1/16th and with the spacer would raise about 1/4.
If you don't want to spend a fortune on a red dot pick up a PA Micro clone, they have removable bases and use all the MICRO dot mounts.
"The rifle itself has no moral stature, since it has no will of its own. Naturally, it may be used by evil men for evil purposes, but there are more good men than evil, and while the latter cannot be persuaded to the path of righteousness by propaganda, they can certainly be corrected by good men with rifles. --Jeff Cooper"
My feedback
Hey Ray,
Not sure if this helps but I have a Aimpoint ML2 and I get perfect cowitness with my iron site (acutally the site I bought from you). It's 1.5" to center.
Thanks for the help.
As you can see in the photo below, my handguard actually mounts to the top of my receiver. My optic will be mounted on top of that. Anything that is about 1.5" from the top of a standard receiver will be too high to cowitness on my rifle. I think I might have to pick up an Aimpoint of some sort and find a mount that will make it cowitness.
Posting Permissions
Reply With Quote