Need to borrow air impact

[opie011]

Im changing the shocks on my truck and have got 3 out of 4 done. For some reason the lower bolt on the front pass side is stuck. I've used my neighbors impact, breaker bar with cheater, penetrating oil, my body weight and the torch. The MFer won't budge. Oh I even tried my torque wrench and that broke. Does anyone have a good impact I can borrow??

[Fentonite]

I've got an air impact tool, and an old school impact tool you smack with a hammer. The air tool is low-end, but it's worked for me. You're welcome to either/both.

[hghclsswhitetrsh]

I've got a husky brand you're more than welcome to borrow. More than happy to meet ou at 104th and highway 85.

[DFBrews]

YOu can use my snapon one... It is bad bitch

[meatman]

I have an IR231 and a Mac tools 1/2" drive you're welcome to try out.

[.40isthenew.45]

One observation, is your compressor up to the task? How long is the hose? I know it seems silly but a shorter air hose will make the impact gun work better. You might try using the shortest hose you can on what you already have, it doesn't cost anything and might save you a trip or two.

[opie011]

I've got an air impact tool, and an old school impact tool you smack with a hammer. The air tool is low-end, but it's worked for me. You're welcome to either/both.

I've got a husky brand you're more than welcome to borrow. More than happy to meet ou at 104th and highway 85.

Thanks for the offer guys

YOu can use my snapon one... It is bad bitch

PM sent

I have an IR231 and a Mac tools 1/2" drive you're welcome to try out.

PM sent

One observation, is your compressor up to the task? How long is the hose? I know it seems silly but a shorter air hose will make the impact gun work better. You might try using the shortest hose you can on what you already have, it doesn't cost anything and might save you a trip or two.

it's a 33gal compressor and it's done everything I've needed it to do. I'm using a 50ft hose and have a 25ft one I'll try later. I was hitting the bolt with 140lbs with no luck. I'm sure it's the impact.

[DFBrews]

Thanks for the offer guys

PM sent

PM sent

it's a 33gal compressor and it's done everything I've needed it to do. I'm using a 50ft hose and have a 25ft one I'll try later. I was hitting the bolt with 140lbs with no luck. I'm sure it's the impact.

If meat mans wont work mine will take lug nuts at 400+ ftlbs off trucks no problem.

[lpgasman]

You can come by my work,ill take it off for you. Around I-76 & 74th

[BushMasterBoy]

PB penetrating catalyst is the ultimate. Makes "Liquid Wrench" look like a wussy. It let me take off the rim bolts of a 1953 tractor.

http://www.blastercorporation.com/PB_Blaster.html