VTAC wall dimensions?

[Big Wall]

If there's enought interest, I'll cut some out with my CNC router.

If you're going to make some, I'll take 1, maybe 2.

[275RLTW]

[Tim K]

Can you send me the top one? It looks more completely dimensioned, but the numbers are not readable.

I'll get a price on 3/4" plywood today and let you guys know the cost. Won't be much.

[Hoser]

I'll get a price on 3/4" plywood today and let you guys know the cost. Won't be much.

I tried the 3/4" and it was fine, but 1" was more stable.

[Tim K]

I tried the 3/4" and it was fine, but 1" was more stable.

No problem.

[275RLTW]

Can you send me the top one? It looks more completely dimensioned, but the numbers are not readable.

I'll get a price on 3/4" plywood today and let you guys know the cost. Won't be much.

email sent to your work address

[HBARleatherneck]

scott, would you send me one too.

[Tim K]

The local yard has 1 1/8" (no 1") available for $41/sheet. Assuming we get two per sheet, materials are $20.50 per unit. I need $5 to cover tax, tool wear, etc. Call it $26 each. You supply the legs, etc.

If you want one or more, send me a PM. I'll wait a day or two to get a total then run them, probably over the weekend. I'm at Hoser's PD match every month (third Saturday), and I also get to the Springs on a regular basis. You're welcome to pick them up at my shop in Woodland Park as well.

[275RLTW]

I built 2 with the legs on opposite sides so I have a left facing one and a right facing one. You can cut them in half below the 6x6" square and add a simple hinge to make it fold over and easier to transport.

[Tim K]

The CNC got freed up at the end of the day so I cut a pair out of some beat up scrap plywood. There was one little 1/2" error on a dimension (I was programming pretty fast), but it aggravated me so I fixed it already. Any others that run should be good.