Close
Results 1 to 3 of 3
  1. #1
    Plinker
    Join Date
    Jan 2008
    Location
    littleton co.
    Posts
    67

    Default Trigger guard removal?

    I recently purchased a enhanced trigger guard for my AR-15 but I'm having trouble removing the original one. the spring pin is extremely tight and the other pin is one directional, meaning it can only come out the same side it went in.

    any help would be greatly appreciated! thanks.

  2. #2
    Gong Shooter micah360's Avatar
    Join Date
    Mar 2007
    Location
    Centennial
    Posts
    378

    Default

    The pin that goes all the way thru needs to be driven out with a punch and hammer.

    Once that pin is out, just use the same punch to push in the "one directional" spring loaded pin, and this will allow the TG to come out.

  3. #3
    Plinker
    Join Date
    Jan 2008
    Location
    littleton co.
    Posts
    67

    Default

    Hey thanks! I was really scratching my head over that one directional pin.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •