What did you do in the reloading room today?

[Great-Kazoo]

See one of you guys with a Dillon is supposed to say come on down, we will crank them out and I will show you how its done and talk you into one and make it a social hour or two.... I am not loosing any time at the range since I am going in spurts after work. If nothing else it is keeping me away from the television in the evening.

I will have 5000 loadable cases shortly perhaps I will talk one of you into some Dillion education when I decide on powder and bullet.

You are welcome to use my 650 to assemble your components.

Welcome to use the 1050 for brass processing

[MarkCO]

Loaded 100 rounds of .243Win: 20 95 grain hunting loads, 30 115 DTAC match loads, 50 105 grain match loads. All for Chrono and groups later this week.

Loaded 800 rounds of 124HP 9mm.

[bobbyfairbanks]

Just got the 1050 refurbished and mounted back on the bench

[Limited GM]

Loaded 250 45 HBRN Berrys on the 550. Stared at the spot where the 1050 use to be. About to swap the 550 over to 9mm and load a couple thou of assorted loads to rid myself of so many partially full boxes.

[USMC88-93]

I don't know there might be something worthwhile having a progressive, I got another 900 done this week on the single stage.

[Great-Kazoo]

I don't know there might be something worthwhile having a progressive, I got another 900 done this week on the single stage.

Time saved as well as your elbow and shoulder.

[cstone]

Time saved as well as your elbow and shoulder.

Just a general idea here, but if I pull the handle 200 times on a single stage to get 50 rounds, I can quadruple my output with the same 200 handle pulls on a four hole press like a Dillon. 50 rounds vs 200 rounds for the same amount of work. How many rounds does it take to recover your investment for the press? You already have the dies and components.

Some people have auto-drives for their press and that is just a whole other class of operation

[Great-Kazoo]

Just a general idea here, but if I pull the handle 200 times on a single stage to get 50 rounds, I can quadruple my output with the same 200 handle pulls on a four hole press like a Dillon. 50 rounds vs 200 rounds for the same amount of work. How many rounds does it take to recover your investment for the press? You already have the dies and components.

Some people have auto-drives for their press and that is just a whole other class of operation

For me it's more of a, was everyone happy with the deal. Money is so bourgeois.

Which reminds me. Ordered a 300blk tool head for the 1050. NO More loose trimmer, hopefully.

[KS63]

I don't know there might be something worthwhile having a progressive, I got another 900 done this week on the single stage.

My arm hurts just looking at this. Invest in a Dillon 550. Such a versatile machine that you can't go wrong IMO.

[Blowby]

I don't know there might be something worthwhile having a progressive, I got another 900 done this week on the single stage.

Primers look a little deep....just say'n