Did some reloading for the first time in 3 months (work had been crazy over the spring, so didn't get much shooting in).

Pulled out the turret with the 9mm dies. Put the correct drum (already pre-set for my 5.2 grains of CFE) into my Lee auto-drum measure. Poured about 1/2 of a hopper full of powder in, and watched as it poured out of the openings in the powder measure, all over the bench and floor. I had installed the drum upside down, and it doesn't seal when installed that way. The drums are "keyed" but keyed every 90 degrees.... not sure why they designed it that way.

Anyway, once I cleaned up from my stupidity, I loaded 400 rounds of 9mm.