Welding help please

[drift_g35]

YOu can come over to the shop and I can walk you through the setup on mine. You can even bring your welder and we can try it here. If it is 110 and your using an extension cord that will make it suck, if its 220 and your using house current it might suck even more. If you have the pos and neg cables reversed, like for using flux core wire it will suck, and if your using flux core wire with gas it will suck worse. Also have to make sure the tip size and wire size match.

Offer stands to help you out. Im here all day.

Where in aurora are you located. I am using a 220 plug from my dryer with a probably 50ft extension cable. I cant get around that though or Ill have to upgrade my service at my house as I am maxed out. What wire is suggested. Ill just go buy wire since there isnt anything on my current spool that describes it. My wire and tips do match, im pretty sure about that.

[dwalker460]

Where in aurora are you located. I am using a 220 plug from my dryer with a probably 50ft extension cable. I cant get around that though or Ill have to upgrade my service at my house as I am maxed out. What wire is suggested. Ill just go buy wire since there isnt anything on my current spool that describes it. My wire and tips do match, im pretty sure about that.

I am actually at 73rd and Washington.
I bet you ahve the polarity reversed and are using flux core wire.