Quote Originally Posted by sealer View Post
Going to HRO this week for sure. Thanks for the input guys.

Can I go to the meeting on the 24th or should I wait until I have a better understanding?

Thx - Drew
Hey Drew,
I'd suggest doing some reading in the study guides, and talk to the guys at HRO as well. It'll help you understand what is being discussed and give you ideas of how you'd like to participate. If all goes well at the meeting, we'll likely have more meetings in the future, etc. and get you involved.

Baglock1 gave you a rundown of what we talk about. When we say 2m radios, we are talking about radios made to operate on the 2meter radio spectrum. The 2m is the wavelength, and is a guide to the frequency being used. In this case, 2m is the 144-146mhz band. The exact range is a little more than that but it puts you in the ballpark. 6m is the 50mhz range, and so on. If you're a mathnut, frequency is 300/wavelength. Its not deadnuts exact on the frequencies used, but close. One band that hams use, is more often referred to by the frequency than the wavelength, and that is the 75cm/440mhz band. Most just call it 440, and same goes with the 220/1.25m band as well, but thats not a real commonly used band. Part of the reason they use wavelengths instead of the frequencies, has to do with how many different bands are available. Its alot easier to say 6m, 10m, 12m, 15m, 20m, 17m, 30m, 60m, 160m than it is to call them by mhz. Read thru a study book, and it'll make alot more sense.