Close
Page 4 of 6 FirstFirst 123456 LastLast
Results 31 to 40 of 56

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Grand Master Know It All
    Join Date
    Mar 2006
    Location
    Dickshooter, ID
    Posts
    4,828

    Default

    Get a permit, any faulty work that say burns the house down can be your fault without a permit. Any resale value you think you'll get from this finish will vanish.

    Get a radon test before you start.

    Seal the concrete against moisture.

    Put in a full bathtub not a stall.

    With your plans and kids skip hardwood and use a vinyl wood product.
    http://www.homedepot.com/h_d1/N-5yc1...&storeId=10051

  2. #2
    Grand Master Know It All newracer's Avatar
    Join Date
    Nov 2004
    Location
    Timnath
    Posts
    4,583

    Default

    Some counties will consider a garage a living space and tax it as such if you texture it.

    You county or city should have info on how much clearance they require around mechanical equipment. Here it is 30" in front of the furnace and you must have room to remove the water heater around the furnace.

  3. #3
    High Power Shooter jslo's Avatar
    Join Date
    Jun 2012
    Location
    Littleton
    Posts
    827

    Default

    Clearances are listed on the appliances themselves, they're not regulated by the building department.

  4. #4
    Iceman sniper7's Avatar
    Join Date
    Mar 2008
    Location
    Brighton
    Posts
    16,986

    Default

    Quote Originally Posted by jslo View Post
    Clearances are listed on the appliances themselves, they're not regulated by the building department.
    Guess I better check this. That would really cut into my plans.
    All I have in this world is my balls and my word and I don't break em for no one.

    My Feedback

  5. #5
    Iceman sniper7's Avatar
    Join Date
    Mar 2008
    Location
    Brighton
    Posts
    16,986

    Default

    Okay looks like for Adams county it is $69 for the first $2000 of valuation and $11 for each $1000 after that for my price range. So if I value it at $30,000 it will be a permit fee of $377.

    Does this include inspectors coming out or is that a whole separate cost?

    Oh...and if you don't get a fee and someone rats you out it is $100 fine and or ten days in jail for each day you went without a permit....good info to know if you don't like your neighbors.
    All I have in this world is my balls and my word and I don't break em for no one.

    My Feedback

  6. #6
    Grand Master Know It All newracer's Avatar
    Join Date
    Nov 2004
    Location
    Timnath
    Posts
    4,583

    Default

    Well my building Department does.

    http://www.fcgov.com/building/pdf/ba...ish-09code.pdf

  7. #7
    High Power Shooter jslo's Avatar
    Join Date
    Jun 2012
    Location
    Littleton
    Posts
    827

    Default

    Quote Originally Posted by newracer View Post
    Misunderstood. Clearance in front is a standard 30" but sides and back are listed on appliance and strictly enforced. Make sure you don't have a use tax and plan review fee, those can double your fees.

  8. #8
    Grand Master Know It All newracer's Avatar
    Join Date
    Nov 2004
    Location
    Timnath
    Posts
    4,583

    Default

    Quote Originally Posted by jslo View Post
    Misunderstood. Clearance in front is a standard 30" but sides and back are listed on appliance and strictly enforced.
    Now I understand what you were saying.

  9. #9
    So old he can't get it up twitchyfinger's Avatar
    Join Date
    Apr 2004
    Location
    Franktown
    Posts
    935

    Default

    All the inspections are included. Electrical is a state inspection of its own but you said that's done.

  10. #10
    Iceman sniper7's Avatar
    Join Date
    Mar 2008
    Location
    Brighton
    Posts
    16,986

    Default

    Quote Originally Posted by twitchyfinger View Post
    All the inspections are included. Electrical is a state inspection of its own but you said that's done.
    In the garage it is done, not the basement though
    All I have in this world is my balls and my word and I don't break em for no one.

    My Feedback

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •