There will be a slight delay.....

[BPTactical]

On any work I had planned for this weekend(a bunch)
The kid grenaded the clutch on his S10 so instead of fixing firearms I get to pull a tranny!
Yay!
Just a heads up and I apologize for any inconvenience in advance.

[Great-Kazoo]

Is pulling a tranny like giving a reach around?

[ray1970]

Not sure why this will slow you down much. Shouldn't take you more than about two hours.

[Bailey Guns]

Is pulling a tranny like giving a reach around?

[BPTactical]

Is pulling a tranny like giving a reach around?

I don't have your habits Jim, besides you being from NY you probably have more experience than I.


Ray, your not helping much..........

[ray1970]

I have a fancy schmancy extension that might help if you want to borrow it. It's really long and has a 1/2" drive input with a 3/8 male end. Made just for transmission bolts. Works awesome with my Snap-On wobble sockets. You can borrow some of those too if you want. Text me if you need anything.

[SideShow Bob]

1/2" drive input with a 3/8 male end.

That is pretty funny in a thread that mentions pulling trannys and reach arounds........

[ray1970]

Sometimes it's good to be the mechanic. You can spend all day talking about nuts and rods and cranks and how big your tool is. And just about everything has a male and a female end. Except for some of the really strange stuff some of that has two male ends or two female ends.

[Byte Stryke]

wish I was there Brother. I think my fastest 5 speed drop and swap is 45 minutes.
BE SURE TO HAVE AN ALIGNMENT TOOL!

[ray1970]

I probably have an alignment tool if your clutch kit doesn't come with one.