OK door guys. How do I fix this?

[griebel303]

I am no door expert, more of a weekend diy'r but I had an interior frame broke like that when I moved into our house. Depending on the frame, you might be able to get the piece you need from the Home Depot. They sell individual pieces of the frame you use to replace it :

http://www.homedepot.com/p/t/2020892...3#.UWiAz7WbNR0

http://www.homedepot.com/p/t/2031118...3#.UWiAzLWbNR0

They also sell just the flat piece without any trim on it for like $8, which is what I used. Pop the trim off the front on the broken side and then you get access to the nails anchoring. Saw those off and then you knock out the shims which will help with wiggle room for the top of it. Then saw any at the top that you can, where the top piece joins the side. Once you get that off it shouldn't be too hard getting the new piece in. A little bit of a pain to get just one side off the frame, but with a saw zaw and a drill you can make it look pretty good. Hope that helps a little?