Close
Results 1 to 10 of 18

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Varmiteer
    Join Date
    Feb 2008
    Location
    Eastern Wyoming
    Posts
    574

    Default My Pole Barn...a work in progress.

    This barn will be 36'x48'x12' sidewalls. There will also be a 12'x48' lean to on the South east side. Total size will be 48' x 48'.

    I had 2 of my friends come over to help set the trusses (4/12 pitch). We did this in 20-30 mph winds, with freezing drizzel. It was miserable. My tractor only will lift to 10 feet, so it was of no use, since the sidewalls are 12 feet high. The trusses weigh 390 pounds. We man handled one end at a time up the walls. We hung them point down. We used a come along to flip them point up.

    My wife and I built almost everything else so far. Just the two of us.

    I would be done, but the wind wont stop, so we cant hang the steel. I will update the pictures as I get more work done.

    It will have a man door and a commercial roll up in the center 12' wide and 12' high.




    Last edited by HBARleatherneck; 01-08-2014 at 12:38.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •