PDA

View Full Version : Thread size for a 10/22?


Roger Ronas
10-25-2014, 19:22
Can anyone tell me what thread size is on a rugar 10/22 barrel end? Is it the same as a 5.56 barrel.
Thanks
Roger
kwando
10-25-2014, 20:17
Should be 1/2x28".. At least thats what the breakdown is. And .22 cans are also the same
Roger Ronas
10-25-2014, 21:12
Cool Thank You. I assumed so but you know what happens when you assume.

Roger
Hound
10-25-2014, 22:33
Should be 1/2x28".. At least thats what the breakdown is. And .22 cans are also the same

+1 this what I run on my 10/22 takedown.
Hoser
10-26-2014, 05:33
Length of threaded portion is different for rimfire than it is for centerfire. Cant remember off the top of my head. Just a bit shorter.
Great-Kazoo
10-26-2014, 09:18
Length of threaded portion is different for rimfire than it is for centerfire. Cant remember off the top of my head. Just a bit shorter.

.450 ish
BPTactical
10-26-2014, 19:38
Dedicated 22 cans typically have proprietary configurations.
1/2 x 28 TPI RH is the diameter and pitch but the configuration of the threaded shank is where it gets tricky.
When I thread for a 22 can I always recommend that the customer either have the can in their possesion or definitely know what can they are going with.