CoGirl303
03-23-2018, 21:26
There's two pins that hold the fire control group into the receiver. The forward pin just above and forward of the trigger keeps coming out.
I thought the pin was worn, so I bought a few replacements from Midway (one to replace and a few extra's to keep on hand) and put one of the new pins in but when I simulate racking a shell and the pump goes forward the [brand new] pin pops out.
(generic google image used) see forward pin (right pin) for visual.
https://uploads.tapatalk-cdn.com/20180324/24b914fadd6578674f8b0e3a2a15eb33.jpeg
Any ideas?
For the time being, I took a few small pieces of duct tape and put over the pins to get me through my pheasant hunt on Sunday but that's a temporary fix.
If anyone can recommend a quality Remington qualified gunsmith I'd be grateful.
It is a 12 gauge.
Sent from my iPhone using Tapatalk
I thought the pin was worn, so I bought a few replacements from Midway (one to replace and a few extra's to keep on hand) and put one of the new pins in but when I simulate racking a shell and the pump goes forward the [brand new] pin pops out.
(generic google image used) see forward pin (right pin) for visual.
https://uploads.tapatalk-cdn.com/20180324/24b914fadd6578674f8b0e3a2a15eb33.jpeg
Any ideas?
For the time being, I took a few small pieces of duct tape and put over the pins to get me through my pheasant hunt on Sunday but that's a temporary fix.
If anyone can recommend a quality Remington qualified gunsmith I'd be grateful.
It is a 12 gauge.
Sent from my iPhone using Tapatalk