Is there a way to assemble the m1c bolt without the bolt tool?
If not, anyone in the Longmont to Louisville area have one I could use?
Printable View
Is there a way to assemble the m1c bolt without the bolt tool?
If not, anyone in the Longmont to Louisville area have one I could use?
Never worked on a carbine bolt, but I've read many times it's a hateful bitch without that tool. No, I don't have one.
C- Clamp and spent case. Looks like a simple version of this unit.
https://tse3.mm.bing.net/th?id=OIP.M...=0&w=291&h=205
Tried a wood clamp last night and could not get it to stay. Will try a c-clamp as suggested.
Are you just trying to reinstall the ejector?
Make sure there's soft / brass jaws or you might damage something.Quote:
Originally Posted by Erni
Yes, will retry tonight after I rig up a fixture or something.Quote:
Originally Posted by ray1970
Got a drill press?
Envision the tool and turn it vertically.
Rigged up a fixture from an old aerospace c-clamp assembly tool I picked up 15 years ago. That held the ejector and bolt steady. Then a spring clamp held the extractor in and provides a 3rd hand. Then it was just a matter of pushing the plunger in far enough to get the ejector over it. It was a bear to get this done.
Not taking it apart again for a while.
Been there a few times myself. Glad you got it done.Quote:
Originally Posted by Erni