* withdrawn / sold*
Printable View
* withdrawn / sold*
Parts Fairy came today!
Sweet. Been thinking about a pistol build on one of my lowers. Just haven't researched all the technicalities yet. There was a box on the form when I purchased them for long gun, handgun, or "other" and the dealer checked "other".
Follow the build and ask questions, Let me make the mistakes for you if you want. :-)
I figure it should work much like my first AR15 build except a different buffer, and shorter barrel/gas system.
I also heard that the gas system tends to affect cycling. Hopefully I'll overcome that.
Will definitely keep an eye on your post. Assembly should be no different than a rifle but I will be curious to see what sort of issues present themselves as far as reliable functioning goes.
Good luck. [Beer]
Happy Father's Day to me! I got a Stag Lower. :-)
Yep, happy father's day to you. Keep updating the post. Thanks.
Might I suggest a Noveske sling end plate for this? I have them on two of my rifle and I love them. Would make a nice way to quickly attach a single point sling if you wanted. This is a picture I swiped off the internet...
http://www.loesshillstactical.com/Po...ke/Noveske.jpg
I actually was looking around, I saw one i liked made by magpul but that has extra bar on it that could get tangled. I'll look into that one, a single-point sling is going to be needed to add to the effect of the pistols I'm looking for.Quote:
Originally Posted by ray1970
I went through several sling plates before I finally settled on the Noveske. The first one was an off brand that I didn't like at all. The second was the Magpul but I didn't care for the metal ring flopping around when the sling wasn't being used. I have heard of people cutting the ring off and just attaching something to the bar the ring was on but I just didn't like that either. Next, I found a GG&G that I liked a lot but it was definitely for right hand use only and I wanted something that was more for ambidextrous use. The Noveske gives me the ability to quickly attach or detach a sling without having anything extra rattling around when the sling is off and having a rotating QD sling swivel mounted in the center of the rifle lets me transition from strong to weak side shoulder easily.
But by all means, run what you want. [Beer]
Now that you mention the rattling I definately do not want it. I guess I didn't think of it. This one is cool, I like the ability to use a quick-disconnect, and it is amboidextrous. That will keep both pistols looking alike while still functinal in the left hand for the lefty.Quote:
Originally Posted by ray1970
Got the engraving done. A real nice lady did the design/laser engraving for me for 90 bucks. The second one is gonna be another 40.
I am very happy.
Anothe mock up
Exsanguinator.... love it. [ROFL1]
Where are the upper receivers and when are you going to put these things together so I can see the finished product? [Coffee]
Very very soon. :-) Had to lay off buying parts since saving for vacation. But will be back to getting them real soon. Next month I will be working on getting the uppers together. :-DQuote:
Originally Posted by ray1970
Got my Free float tubes and "Flash Hiders" in the mail today! :-)
These are gonna look awesome!
Got my Upper Reciever Assemblies in!
Here is a mock up of the Right-Handed one.
Sweet. [Beer]
Got the second lower today.
Got the LPKs in the mail from Palmetto today, I installed one in the right-handed one, but I am going to get a couple Ambidextrous components yet for the left-handed so I am going to wait until those get in the mail to install the left LPK.
Like the sling plates.... are those Noveskes? [Coffee]Quote:
Originally Posted by rbeau30
Quote:
Originally Posted by ray1970
Sure are! They fit perfectly, Just has to take a dremel and zip a little bit off the inside tab to get the RRA tube to fit through the plate, but other than that they are exactly what I wanted it to look like! :-D
Got a pelican case (1550)... the price was right, Thanks carnplanenut!
Going to replace the pick and pull with a new bit of foam custome cut to my specifications.
what freefload hg did you use and about how much did you pay??
nevermind im stupid
Got my Ambi parts in today, Troy Ambi mag release and safety selector.
Just need Bolt carrier groups and optics!
End cap fit.
Engraving side.
Ejection Port Sides.
Still following your progress. Make sure to post a video of you firing these things with one in each hand. [Awesom]