What did you do in the reloading room today?

[Jamnanc]

Set up a harbor freight cement mixer 3.5 cubic feet for corn brass tumbling. Got chicken wire to cover the opening, screw that on and it works for media separation. Noisy as hell, but I can do five gallon buckets of brass at a time.

[Great-Kazoo]

Set up a harbor freight cement mixer 3.5 cubic feet for corn brass tumbling. Got chicken wire to cover the opening, screw that on and it works for media separation. Noisy as hell, but I can do five gallon buckets of brass at a time.

Did you look at the one Lowes sells. It has a resin mixer drum.
http://www.lowes.com/pd_241568-47120...ductId=3591096

[Jamnanc]

Did you look at the one Lowes sells. It has a resin mixer drum.
http://www.lowes.com/pd_241568-47120...ductId=3591096

With the coupon, it was less than $180 out the door.

Do not use undercoating if you try this. It doesn't get hard enough.

[Great-Kazoo]

With the coupon, it was less than $180 out the door.

Do not use undercoating if you try this. It doesn't get hard enough.

Remove the blades, then put the brass in to one of those 5 gal plastic buckets with cover.

[Jamnanc]

Never installed the blades. It works great with no bucket. Just cover with plastic and bungee cords. I have 1/4 welded wire mesh over the hole. It's sweet.