Close
Results 1 to 10 of 59

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Woodsmith with "Mod-like" Powers
    Join Date
    Apr 2007
    Location
    Woodland Park
    Posts
    3,269

    Default

    I'm stuck and I need some help. I can't figure out what to do about the lights. I have a bunch of ceramic single bulb fixtures on the ceiling. I can leave them, but they're ugly. It's also under-lit since I removed the even uglier fluorescents. I'm thinking I'll do some track lighting in a couple of places, but what I'm really after are some fixtures I can use to replace the ceramic fixtures that will put out a lot of light. When I first built this room I had 200W bulbs. They were bright, but expensive to replace. I'd like something more modern like LED if possible. Of course, I'm also out of budget, so cost is an issue.

    I need a clever idea. Lay one on me.
    "It takes considerable knowledge just to realize the extent of your ignorance"

    Thomas Sowell

    www.timkulincabinetry.com

    See our reviews below:

    http://www.thumbtack.com/Tim-Kulin-C...service/788419

  2. #2
    Joe_K
    Guest

    Default

    Quote Originally Posted by Tim K View Post
    I'm stuck and I need some help. I can't figure out what to do about the lights. I have a bunch of ceramic single bulb fixtures on the ceiling. I can leave them, but they're ugly. It's also under-lit since I removed the even uglier fluorescents. I'm thinking I'll do some track lighting in a couple of places, but what I'm really after are some fixtures I can use to replace the ceramic fixtures that will put out a lot of light. When I first built this room I had 200W bulbs. They were bright, but expensive to replace. I'd like something more modern like LED if possible. Of course, I'm also out of budget, so cost is an issue.

    I need a clever idea. Lay one on me.
    http://m.homedepot.com/p/Lithonia-Li...0-M6/204648154

    Put 3 of these in my house and they are bright without the headache. They also make higher lumen output models. Install was easy.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •