[QUOTE=SideShow Bob;1985692 place on the first floor. And of course I have no reduced sound devises.
[/QUOTE]

You're probably 1 hr out. Next time call. I might be able to make the trip

Quote Originally Posted by Jefe's AR View Post
For future reference.

You'll need:

1. One internal combustion engine. In running condition.
2. One length of rubber hose. Length is dependent on location of internal combustion engine and unwanted critter.
3. 1 sheet of plywood or similar flat substance that can temporarily cover window well.

Run length of hose from window well to internal combustion engine. Cover window well with sheet of plywood or similar item. Making sure to cover entire opening and window below is closed tight. Plywood does not need to make airtight seal but should cover entire opening with minimal gaps. Insert hose under plywood. Go start internal combustion engine and insert other end of hose into exhaust exit. Run for approx. ten minutes or until unwanted critter is deceased. Remove plywood and allow noxious gas fumes to clear for 10 minutes. Remove unwanted critter and dispose of properly.


Had a vet suggest the same style of relocation. Only it was for a few feral cats that were better off removed. Surprised they were able to survive birth.