Post a picture of your latest purchase

[Wulf202]

Heck yeah, I really value my oscillating saw. I just accept that it goes through blades faster than I expected, and just buy more than I need for whatever job I’m doing. Totally worth it.

Wiggle saw with the putty knife blade is just awsome. Beed to strip old paint or caulk - done in minutes.

Dull blades get turned into putty knife blades for me. I have a corded dremel branded one and a cordless m18.

[kwando]

[Bailey Guns]

Upgraded my shop lighting to LED strips. I can't believe how much BRIGHTER they are than the T8s.

[Great-Kazoo]

Upgraded my shop lighting to LED strips. I can't believe how much BRIGHTER they are than the T8s.

Those go in to the light housing? I have 48" leds that we took from the old shop. Looking at making my own 6' using 1/2 round pvc and what ever the max wattage led strips offered.

[ray1970]

Is that one of those new fangled single stack Glocks?

[Bailey Guns]

Those go in to the light housing? I have 48" leds that we took from the old shop. Looking at making my own 6' using 1/2 round pvc and what ever the max wattage led strips offered.

These strips just stick on the underside of the fixture in the same place the T8 bulb would be. I suppose you could put them inside a fixture like you'd find in an office or something.

I removed the ballast and tombstones (not required...but looks better), hooked up the power to the LED power supply box (that fits inside the fixture just like the old ballast), put the cover back on and then stuck the magnetic light strips on the fixture cover.

Hard to tell from the photo how much brighter they are:

[BladesNBarrels]

I like the creative attic fan!

[Bailey Guns]

Idaho Redneck Special Ceiling Fan...really classes up the joint. But it works.

[n2877]

Sent from my iPhone using Tapatalk

[SouthPaw]

Finally put some shelves in the cabinet for some ammo storage. Bought some shelving track, clips and OSB board. The whole thing cost me about $20 and an hour of my time. I have extra shelves if someone wants to do the same thing. The boards are already cut and will put right in (20”x14.5”).