can't find a barrel, suggestions?

[a77ssii]

I'm shooting about .5-1MOA depending upon whether or not my eyes are crossed with the bolt gun whereas regardless of what I do the best I can squeeze out of the AR is 3MOA which is unacceptable. A custom barrel is out of the question, IMO it's not worth it. I'll find it a new home first. Thanks for the A1 info, I'm gonna see if anything pops up and at the same time I'm researching Daewoo so if nothing works out with the barrel swap I can try and trade it off.

[jerrymrc]

I'm shooting about .5-1MOA depending upon whether or not my eyes are crossed with the bolt gun whereas regardless of what I do the best I can squeeze out of the AR is 3MOA which is unacceptable. A custom barrel is out of the question, IMO it's not worth it. I'll find it a new home first. Thanks for the A1 info, I'm gonna see if anything pops up and at the same time I'm researching Daewoo so if nothing works out with the barrel swap I can try and trade it off.

Since ya brought it up I know you are aware that the Daewoo you are looking for is a DR200 (1-12) Ace makes the pieces to make one nice.

[a77ssii]

That depends, while I've seen the parts Ace makes I would either leave it thumbhole or see about a clubfoot. I have no desire for a side folder, underfolder or any other kind of folder nor another 6 position. I shoot for accuracy and without a stock it's spray and pray which IMO is a waste of ammo. I just have to look at reliability, parts cost/availability and whether I'll gain in accuracy or if I should just say screw it and trade it off for a .338RUM. But first and foremost I want to exhaust every effort to find an affordable A1 barrel since I do already have the AR.

[Hoser]

Define affordable.

[a77ssii]

Affordable would be around $200, I paid $400 for the complete upper and $100 for the complete RR lower.

[KimberLover]

http://www.gunkings.com/
16" $139.00
Jim seemed to be a good guy to deal with.
Phone number on the site.

[GunsRBadMMMMKay]

seen these while I was killing time on gb. non-lined military http://www.gunbroker.com/Auction/Vie...Item=248841974

[NW CO Raptor Feeding]

Check Out the AR Stoner barrels from Midway, they are very reasonable, Wylde Chamber, 1n8 spin. Both mine shoot 40gr Vmax @ 3800 under .5 MOA. At those speeds they do unspeakable things to P-dogs, and vaporize Ground Squirrels.