What did you do in the reloading room today?

[20X11]

Doing 50-100 at a time is going slow, but I already made it thru half of the 5 gallon bucket.

Then I will be trying the hornady LNL primer pocket swage I picked up a few weeks ago. The Dillon super swage would be too lot going thru the amount I have.

Sounds like you need one of these...
http://uniquetek.com/product/T1568-6

[whitewalrus]

Sounds like you need one of these...
http://uniquetek.com/product/T1568-6

I had seen that but I am not sure that the shell plate was designed to have that amount of force on it. But I?m sure that others are using it without issue.

[Hoser]

I had seen that but I am not sure that the shell plate was designed to have that amount of force on it. But I?m sure that others are using it without issue.

If you crack a shellplate using one of those, Dillon will not warranty it.

[20X11]

If you crack a shellplate using one of those, Dillon will not warranty it.

I'll let you know how it works out.

[whitewalrus]

I'll let you know how it works out.

Probably would work fine for 223. I wouldn?t use it on LC 7.62, those crimps take a lot of force to get out last time I did some.

I am curious as to how it works out as well.