How to fix bent gas tube?

[BPTactical]

The gas tube has nothing to do with how straight the rifle shoots.
Barrel nut alignment would be my guess.

[Skukripion]

The gas tube has nothing to do with how straight the rifle shoots.
Barrel nut alignment would be my guess.

The part that connect barrel to upper receiver?

[BPTactical]

Correct.
If you are not comfortable or do not fully understand what you are dealing with come see me. I would hate to see you damage your rifle or yourself.

[Skukripion]

Correct.
If you are not comfortable or do not fully understand what you are dealing with come see me. I would hate to see you damage your rifle or yourself.

I don't know your shops actual address, but it seems far from me. Let me try and see tomorrow if the guys at my local shop is kind enough to work this out, it may still be under warranty. I'll pay you a visit if they are giving me attitudes. You can PM me the quote at yours, so I won't be bullshitted on.

Thanks.

[Tinelement]

Listen to the BP!

Don't piss with it and kink it. I don't know what would happen, but think of it as a kinked or broken brake line on your car. Pressure, volume, flow rate, etc. A simple kink can reduce volume and then it won't work.

Just replace it.

[SideShow Bob]

I don't know your shops actual address, but it seems far from me. Let me try and see tomorrow if the guys at my local shop is kind enough to work this out, it may still be under warranty. I'll pay you a visit if they are giving me attitudes. You can PM me the quote at yours, so I won't be bullshitted on.

Thanks.

If you or someone has made modifications, a factory warranty is out the window.
And the LGS where you bought it from will tell you to contact the manufacturer for warranty work.

Go see Bert, and tell him everything done to it when you take your AR to him. You can't do any better than BP Tactical.....

[Skukripion]

If you or someone has made modifications, a factory warranty is out the window.
And the LGS where you bought it from will tell you to contact the manufacturer for warranty work.

Go see Bert, and tell him everything done to it when you take your AR to him. You can't do any better than BP Tactical.....

I just put a knight's armament rail on it, i doubt Bushmaster will say that's too much of a tempering. If it is, I shall call them Bushbastard.

[SideShow Bob]

If it was a 2 piece hand guard replacement rail, I see your point.
If it was a one piece free float rail, you are screwed for any factory warranty claim.

If this problem existed before you put the rail on, that should have been the time for warranty repairs.
But if the problem only manifested itself after you put the rail on in your attempt at being a weekend gun smith,
admit it man, you Bubba'd your AR ! And now you want someone else to fix your fuck up on their dime.