Close
Results 1 to 7 of 7

Thread: FAL for the win

  1. #1
    PartyPenguinCU
    Guest

    Default FAL for the win

    ALCON,

    This is my first post here, so thank you in advance for the replies. It's a pleasure to be a part of the board. Anyways, down to business. I am looking at an Imbel FAL built on an Enterprise reciever. I think that they may have meant Entreprise but simply made a typo. I have heard less than great reviews of the Entreprise/Enterprise FALs. If anyone has any experience with a build like this or could offer me any advice I would greatly appreciate it. Also, which is better: 9mm or .45 ACP? Just kidding. Thanks.

    Penguin

  2. #2
    Stircrazy Jer jerrymrc's Avatar
    Join Date
    Jan 2004
    Location
    Colorado Springs
    Posts
    8,166

    Default

    The best advise I can give you is to shoot it. Entreprise has had over the years some runs that were so-so and that applies to the factory built guns as well.When it comes to receivers none have been 100% perfect and that is because of all the variation in the kits over the years.

    I have owned and built on just about everyone out there. Imbel kits are type 3 and the good thing about them was they were carried a lot and shot little. Once again the best thing would be to meet at a range and run 10 rounds through it. If it does what it is supposed to then buy it.

    One of the things about the Fal is they come in so many flavors.
    I see you running, tell me what your running from

    Nobody's coming, what ya do that was so wrong.

  3. #3
    Industry Partner BPTactical's Avatar
    Join Date
    Dec 2009
    Location
    North Metro
    Posts
    13,965

    Default

    ^^^FAL whore
    The most important thing to be learned from those who demand "Equality For All" is that all are not equal...

    Gun Control - seeking a Hardware solution for a Software problem...

  4. #4
    Stircrazy Jer jerrymrc's Avatar
    Join Date
    Jan 2004
    Location
    Colorado Springs
    Posts
    8,166

    Default

    Quote Originally Posted by BPTactical View Post
    ^^^FAL whore
    I am a lightweight. I know of one member here that has 8-10 of them and many of the guys that got in on the ground floor of kits have 12-15. If one just wanted to collect one of each of the basic models you would have about 14 of them.
    I see you running, tell me what your running from

    Nobody's coming, what ya do that was so wrong.

  5. #5
    Woodsmith with "Mod-like" Powers
    Join Date
    Apr 2007
    Location
    Woodland Park
    Posts
    3,273

    Default

    Quote Originally Posted by PartyPenguinCU View Post
    Also, which is better: 9mm or .45 ACP?
    I know zip about FAL's, but I can tell already you're going to fit in here.
    "It takes considerable knowledge just to realize the extent of your ignorance"

    Thomas Sowell

    www.timkulincabinetry.com

    See our reviews below:

    http://www.thumbtack.com/Tim-Kulin-C...service/788419

  6. #6
    PartyPenguinCU
    Guest

    Default

    Quote Originally Posted by jerrymrc View Post
    The best advise I can give you is to shoot it. Entreprise has had over the years some runs that were so-so and that applies to the factory built guns as well.When it comes to receivers none have been 100% perfect and that is because of all the variation in the kits over the years.

    I have owned and built on just about everyone out there. Imbel kits are type 3 and the good thing about them was they were carried a lot and shot little. Once again the best thing would be to meet at a range and run 10 rounds through it. If it does what it is supposed to then buy it.

    One of the things about the Fal is they come in so many flavors.
    Good collection. I see you are in CO SPRINGS. We should meet up and you can teach me a thing or two about the FAL.
    Last edited by PartyPenguinCU; 01-01-2013 at 09:36.

  7. #7
    Stircrazy Jer jerrymrc's Avatar
    Join Date
    Jan 2004
    Location
    Colorado Springs
    Posts
    8,166

    Default

    I am just a hack. I will say I do not do charity cases anymore since the last three that came my way and needed help I spent untold hours fixing the issues only to see the person put it up for big $$ once it was running right.

    Buy a FU'ed Fal for cheap and take it to Jerry. He will fix it and then you can sell it for twice what ya paid for it.
    I see you running, tell me what your running from

    Nobody's coming, what ya do that was so wrong.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •