What did you do in the reloading room today?

[KS63]

^^^ Sometimes that rod gets tweaked and binds up. You need to look at the rod from the top and see where it's bent. Loosen that aluminum block that's located in the primer tube, and work the handle as you observe the rod where it binds. My 550 did the same thing and Brian Enos posted this fix. Works like buttah now.

[Great-Kazoo]

^^^ Sometimes that rod gets tweaked and binds up. You need to look at the rod from the top and see where it's bent. Loosen that aluminum block that's located in the primer tube, and work the handle as you observe the rod where it binds. My 550 did the same thing and Brian Enos posted this fix. Works like buttah now.

Alignment of rod and height of block if the bottom area is GTG. You could upgrade to a 650 and not have that issue.












Or a 1050 if you listen to the dark side of reloading.

[Great-Kazoo]

Called dillon about a look over for one of the 650's. First question he ask, whats wrong with it? It's not a 1050. Short pause he laughs and says, OK you got me there. 4-6 weeks turn around time, no problem.
It makes the reloading area look bigger with 1 missing, the wife said. So you think i need more room for the presses too?
Like she really wanted that 3rd garage bay to park her car in.