View Full Version : Post a picture of your latest purchase
Bailey Guns
03-09-2019, 18:14
There was a chicken place in AZ way back when I lived there that I loved...El Pollo Loco I think it was called. That was some good chicken.
Panda. Gross.
Cherry Village in Parker has great Chinese and some decent Thai. Best in parker IMHO.
Panda. Gross.
Cherry Village in Parker has great Chinese and some decent Thai. Best in parker IMHO.
I liked Poke Bowl off of Main Street and Parker Rd when I lived there.
Poke Bowl.
Almost sounds like a game of some sort with magical creatures.
I liked Poke Bowl off of Main Street and Parker Rd when I lived there.
Never tried them
Years ago we discovered poke in Hawaii where you can buy many kinds in the grocery delis everywhere. It's the cheapest meal you can buy out. It's sushimi or raw fish usually with marinade, rice and veggies. I recently had some excellent poke for lunch at Sushi Leo in Longmont. Highly recommend it.
Sometimes we make poke at home. Here's an Ahi tuna poke with endamame, tomatoes, sushi rice, sesame, homegrown mint and microgreens. Delicious, cheap and easy.
https://www.ar-15.co/attachment.php?attachmentid=77558&d=1552189319
77558
Zundfolge
03-09-2019, 22:35
That looks awesome!
One of the americanized Chinese food we like is Hoongs Palace in Centennial. Even people from big cities were fairly impressed.
Great-Kazoo
03-09-2019, 23:43
There was a chicken place in AZ way back when I lived there that I loved...El Pollo Loco I think it was called. That was some good chicken.
There's one down the valley. Thankfully it's only a 30 min drive for some Hate Chicken, in PV
Poke Bowl.
Almost sounds like a game of some sort with magical creatures.
It's pronounced, or should be pronounced Poe Key . Hawaiian brah .
One of the americanized Chinese food we like is Hoongs Palace in Centennial. Even people from big cities were fairly impressed.
Haven't been there in a long time. Was always a favorite to meet up with business associates or friends in the area.
Bailey Guns
03-10-2019, 06:54
There's one down the valley. Thankfully it's only a 30 min drive for some Hate Chicken, in PV
Ah...so they're still around. That's cool. Last time I went there would've been around 1984.
Great-Kazoo
03-10-2019, 08:27
Ah...so they're still around. That's cool. Last time I went there would've been around 1984.
They advertise a lot, next trip down the hill we'll drop in for lunch.
Poke Bowl.
Almost sounds like a game of some sort with magical creatures.
With some form of mandate to obtain one of each, like a half assed Noah.
I liked Poke Bowl off of Main Street and Parker Rd when I lived there.
I've lost count of how many restaurants have been in that spot over the last 26 years.
So I checked the menu. It's unbelievable huge yet they have only 3 Poke bowls, small medium and large. LOL Is there any choice of the style of Poke?
I'm so white bread, I only get chicken lol
Panda. Gross.
Agreed. There has to be some good local Chinese food options for most people on the front range.
Great-Kazoo
03-10-2019, 20:45
Ah...so they're still around. That's cool. Last time I went there would've been around 1984.
https://order.elpolloloco.com/?fbclid=IwAR1ddaavpkXw1D5Pu2ZmNWPYu_G2V4-4IZ6Lf9v8rccy1jSUxAw_CIE5YdM
Bailey Guns
03-10-2019, 21:08
Ooh... They're moving north. Locations in/around SLC. A short 20 hour round trip.
StagLefty
03-11-2019, 11:48
7 year old laptop developed growing black areas so my son surprised me yesterday with a new 15" Acer Chromebook. Really surprised how much I like it. Having a 12 hour battery is going to be nice !!!
77567
Delfuego
03-11-2019, 13:56
Agreed. There has to be some good local Chinese food options for most people on the front range.You want "whitey" Chinese, or ducks hanging in the windows Chinese????
Ducks in the window. I am not aware of any in C/S, but know a couple like that in Denver.
Delfuego
03-11-2019, 15:16
For hanging ducks, Canton BBQ next to H-Mart and Hong Kong Cafe (HK style and lots of other good stuff) both in Aurora are awesome!
Best Dim Sum is between Star Kitchen and Super Star on Federal.
I don't know any offhand in CS.
Trying Dim Sum is on my list.
I like north or north east style authentic Mandarin over South Cantonese style foods.
Lots of people loves dim sum, but the food on cart walking around reminds me of 80s train style of delivery.
There is also Chinese-Korean (Koreanized Chinese) food Chinese restaurant all over Aurora. One is near H mart near Parker road and one in Havana across Bozarth Chevy.
TEAMRICO
03-11-2019, 16:47
For COS you would find hanging ducks at the Asian Pacific Market on Platte. $10 for a half and $18 for a whole with the head!
Was there Saturday.
SideShow Bob
03-11-2019, 20:17
Trying Dim Sum is on my list.
If you are in the area, there is a good Chinese place for Dim Sum on Evans west of Monaco. In the shopping strip just west of the Mc Donald’s,
For life of me I cannot recall the name.
newracer
03-12-2019, 08:41
https://media-cdn.tripadvisor.com/media/photo-s/02/5c/00/1b/legendary-fish-tacos.jpg
Delfuego
03-12-2019, 11:29
If you are in the area, there is a good Chinese place for Dim Sum on Evans west of Monaco. In the shopping strip just west of the Mc Donald’s,
For life of me I cannot recall the name.I think it's gone now. It was there forever, and got less popular over time. The one on federal are better quality.
Delfuego
03-12-2019, 11:31
China Jade Iliff & Peoria has good Sichuan Chinese
SideShow Bob
03-12-2019, 20:01
I think it's gone now. It was there forever, and got less popular over time. The one on federal are better quality.
Yep,drove by there today, hell, everyday and noticed it has turned into a dry cleaners.
Oreilly's Auto sent me a $10 off 20 in-store coupon today and bought this :
Royal Purple Max 1 Quart 75W-140 Synthetic Differential Fluid with friction modifier.
Paid only $12.49+tax
https://images.oreillyauto.com/parts/img/large/ryp/75-140.jpg
https://i.imgur.com/aMEuRhS.jpg
S&W .38/44 Pre Model 20 "Heavy Duty". Nightmare transaction, took me a full month to receive it, but man this gun fucks. Easily the smoothest Smith out of the at this point hundreds I've used.
https://i.imgur.com/aMEuRhS.jpg
S&W .38/44 Pre Model 20 "Heavy Duty". Nightmare transaction, took me a full month to receive it, but man this gun fucks. Easily the smoothest Smith out of the at this point hundreds I've used.
Outstanding!! Years ago I had one of the Pueblo PD marked 4”-looked a lot worse and the action even more so ahahaha. Sold to a friend that had a famiy connection to the pd. Enjoy that classic Smith!
https://i.imgur.com/aMEuRhS.jpg
Let's see the rest of that table. Is that supposed to be a river, or a repair?
Grant H.
03-14-2019, 21:19
Stupid Masterbuilt Electric Smoker control board failed during my last smoking...
Oh well, it wasn't that accurate, and didn't hold temp quite as tight as I know can be done...
PID control here we come!
ETA: No, the smoker won't be getting to 800?C, but for $15, these 800?C K-type thermocouples work really well, and are accurate throughout the range (that I have seen)...
Total cost??? $75... New board from Masterbuilt? Probably about the same. But this won't fail again...
https://farm5.staticflickr.com/4913/46659609274_2beb403672.jpg (https://flic.kr/p/2e69GeY)SYL1 (https://flic.kr/p/2e69GeY) by ARNEWB (https://www.flickr.com/photos/61071044@N08/), on Flickr
https://farm8.staticflickr.com/7813/46659609364_9c9741373a_z.jpg (https://flic.kr/p/2e69Ggw)81SYGzvYgCL._SL1500_ (https://flic.kr/p/2e69Ggw) by ARNEWB (https://www.flickr.com/photos/61071044@N08/), on Flickr
https://farm8.staticflickr.com/7872/46467701635_6e2618850f.jpg (https://flic.kr/p/2dNc7Mz)515DoOXuWzL (https://flic.kr/p/2dNc7Mz) by ARNEWB (https://www.flickr.com/photos/61071044@N08/), on Flickr
ETA2: Stupid ass VB ASCII error... (supposed to be degree symbols... not question marks)
Grant H.
03-14-2019, 22:09
MES30?
MES40.
MES40.
Interesting. I've got a MES30, an extra body (no door, tray or shelves) and an extra controller. I haven't used it in a while since my pellet pooper is meeting all of my smoking needs. I should probably sell it all. Maybe I'll have motivation this spring once it's nice out to get some pictures & get it listed. I liked that smoker for sure though. Made some real good meat on it.
Grant H.
03-14-2019, 22:51
Interesting. I've got a MES30, an extra body (no door, tray or shelves) and an extra controller. I haven't used it in a while since my pellet pooper is meeting all of my smoking needs. I should probably sell it all. Maybe I'll have motivation this spring once it's nice out to get some pictures & get it listed. I liked that smoker for sure though. Made some real good meat on it.
I started with a 30. Added the cold smoke box (a must for any of the MES line). Did well with it but then I started doing bigger chunks, and larger batches.
This last round of bacon was 10lbs, but my previous batch was 50lbs. I did turkeys for a church get together last fall, and did 4 11-12lb turkeys.
I've toyed with the ideal of a pellet smoker/grill, but the one I got to play with for a weekend (house sitting for a friend) has me spoiled, and I can't quite justify $1500 on a smoker. Not right now (too many irons in the fire...).
I started with a 30. Added the cold smoke box (a must for any of the MES line). Did well with it but then I started doing bigger chunks, and larger batches.
This last round of bacon was 10lbs, but my previous batch was 50lbs. I did turkeys for a church get together last fall, and did 4 11-12lb turkeys.
I've toyed with the ideal of a pellet smoker/grill, but the one I got to play with for a weekend (house sitting for a friend) has me spoiled, and I can't quite justify $1500 on a smoker. Not right now (too many irons in the fire...).
I did a lot of pork shoulders in mine and they all turned out amazing. I was irked every time that I wanted to smoke a brisket though that I had to hack off several inches and throw it away just to get it to fit. I opened for a GMG DB w/WiFi years ago and have never looked back. I kept the MES30 just because I thought I might use it occasionally and really liked it but with this post I realized it's been covered in the garage unused for years so I suppose I should clear up the space and get it to someone who will get some use out of it. Both the MES30/MES40 are super awesome smokers though especially for the price tag. I think with the proceeds from selling me MES30 and all of the gear I have with it I'll get the pizza attachment for my GMG to make some kick ass pizzas this summer!
Great-Kazoo
03-15-2019, 08:33
I'll get the pizza attachment for my GMG to make some kick ass pizzas this summer!
I've been doing pizzas in cast iron skillets, in the camp chef. Looked at a pizza oven and or attachments.. Yet can do what i want in skillets or perforated pizza tray on the existing smoker.
I've been doing pizzas in cast iron skillets, in the camp chef. Looked at a pizza oven and or attachments.. Yet can do what i want in skillets or perforated pizza tray on the existing smoker.
Kind of hard to hit that ~800deg all-around sweet spot though for handmade pizzas on a cast iron with direct heat from a pellet smoker's pot. My guess is you don't get that crispy top/cheese/ingredients that you would get from a brick oven style that circulates the heat all the way around and not just direct heat on the bottom. I'm looking for that full brick oven result but at home for very little cost. At $20/pie you can pay for a $100 pizza attachment at home pretty quickly. I'm not saying it will be a drastically different result and I don't know we'll use it every night but I think it will be fun the nights we have friends over for "Make-your-own-pie" nights.
Delfuego
03-15-2019, 09:48
Hen's Teeth Anyone?
https://lh3.googleusercontent.com/3PcnVWtBjSb_FJEdTYgML1M0E93DeUZRpBM1DTX11_7ZHiDKGp PAUIGgOfALFSt03b-R-wpOWJUA2KQ2SFcMIeJ8-jJPD7qb00WDjXCl89SHtymsR_haml9XGnhPYKSnSf0llMM8Y21 uc6jlufkg3FQEPBN_X_AXlWurE-N0HU8l2TPqXq7DXTAkRR5xgfKyeHWdDL6H_Txgkqha_4bH3QwY IoJI1ASYW0Hq4cN-r2AzfO6__-p6jXNbOoUjKAbXi9j4mKf2XoG3qTi3gmRyIotoO6GYKbGv7xB3 n15xEjsIXQy1zMrk2RtYchkaA-_nsOD8XclDgOBBNtKvScQffN4ui3ekmRseYIVNLIACVVu3_W0c 8gvMNIoqRhsZVnyZ8EwkEudIyBtBpkuktZFwkbqZ9rPKkd382G APdc0sF3btU7DNj-A1l3Wve2lAgsk73IyiRTFn7QbcKeeumjK4YF21aA1YHfUoMnAq nweq_L3nFTkRGhFoj0On4PaXhCQMkBy8kMGBt4_Ogl3uLO1lhL DGvT2O59Uc4QqrRHmmGkzA-7JZjiJZXBbA2IC0rFlMkZ_VPv3C7Sf3zRsaLBLqfakh0MIjz2E KzIFDIpJJNxl3RqYsmfMTYd3bj1k0CMZWtHlKVaJ0q9kMZlBq3 K-TluWakrTyaFZvLWDMnyTdCCXbF-Uf_Diqr1t7HLBOlEgJVRm1YICPZeHOKnVHLM2frck8=w1672-h725-no
Great-Kazoo
03-15-2019, 18:02
Kind of hard to hit that ~800deg all-around sweet spot though for handmade pizzas on a cast iron with direct heat from a pellet smoker's pot. My guess is you don't get that crispy top/cheese/ingredients that you would get from a brick oven style that circulates the heat all the way around and not just direct heat on the bottom. I'm looking for that full brick oven result but at home for very little cost. At $20/pie you can pay for a $100 pizza attachment at home pretty quickly. I'm not saying it will be a drastically different result and I don't know we'll use it every night but I think it will be fun the nights we have friends over for "Make-your-own-pie" nights.
Au Contraire mon' friend.
Arrived today from Italy. This is my fourth grinder after delving into serious coffee. Baratza Vario is off to eBay.
https://cdn.shopify.com/s/files/1/2425/8607/products/Eureka-Mignon-Specialita-Black_740x740.jpg?v=1549834774
Do you know they sell freeze dried coffee flakes?
Yeah, yeah, I guess you know. :)
-John
Stupid Masterbuilt Electric Smoker control board failed during my last smoking...
Oh well, it wasn't that accurate, and didn't hold temp quite as tight as I know can be done...
PID control here we come!
ETA: No, the smoker won't be getting to 800?C, but for $15, these 800?C K-type thermocouples work really well, and are accurate throughout the range (that I have seen)...
Total cost??? $75... New board from Masterbuilt? Probably about the same. But this won't fail again...
So you replaced a wimpy factory board with heavy duty industrial, NASA certified, orbital-computing, nuclear-grade, turbo-encabulator electronics? Well-played!
Tim Allen is somewhere calling out "Ar-Ar-Ar".....
Bailey Guns
03-16-2019, 16:34
That time of year:
https://i.imgur.com/t5PJRsM.jpg
I wanted a surplus 1911 and ran into this one well cheaper than the CMP's offerings. It's an arsenal rework of course, and it's got plenty of finish wear, but damned if it's not a functional military 1911. Came with the origination trigger thankfully, but I hate fucking around with 1911 trigger parts so might be awhile before it gets dropped in.
https://i.imgur.com/R9gVeMy.jpg
https://i.imgur.com/wAOYFvL.jpg
https://i.imgur.com/qKhH9lg.jpg
Also, for irving
https://i.imgur.com/4YZiCkr.jpg
Arrived today from Italy. This is my fourth grinder after delving into serious coffee. Baratza Vario is off to eBay.
https://cdn.shopify.com/s/files/1/2425/8607/products/Eureka-Mignon-Specialita-Black_740x740.jpg?v=1549834774
Wow nice.
https://uploads.tapatalk-cdn.com/20190317/708f8a3b3ca3b94048f6263f160d0914.jpg
I love Drew Estate cigars. Only recently discovered their stuff with that style label.
The Liga #9 is definitely one of the favorites
Great-Kazoo
03-17-2019, 20:08
That time of year:
https://i.imgur.com/t5PJRsM.jpg
The lemon cuke's area tasty yet mellow one, we're trying them this year in the garden
I used to have a long pipe like this years ago but it got broken (ceramic). These are more comfortable to use than a standard length stem.
https://lh3.googleusercontent.com/NG7rSnJyFM1CBQotZ-Qo_lPo8RHxfuOPqm-KSQVATDIoFSqiMD-QBy5vIN-dhtgtyW66tW87tiEvQzIuxfbH_2oxMiAVq8Cj5QbpPtYtDsKYF wnz3yw8eGk82FYfXbmDhU8s2dphztdhUfbgWX2Mo4V82h6xJ4p-biALltFfl4TNmtvoX_oGU6h1raQPTmB_75wf5W2EaQItHpZYJ_ pMH4Nao4n_B9OLJF9bFH5DYxtA_HfC1NOyJrOJPq7YEOejqMgn DOPb_fnBXDgyt6dJGKtSUpsMgJhCeZ6f1j7KIFzxr1bVwlIRCu uAqSdS6_mnUMQuBaC5Qb0J9SmCFwPq7tjjzA2RCNT36cuZTtlp BIyWyrfHT8lljDcqMo81Cn-CXZ-hjskEVgCYgg2KGRFvfEbR6LkZmS8VouyWaNERd5Bj0h62vp3wi Mb_V1WGBNmLlsIb9a13mX9T8b9FPQ-o9WxJCPluIT_qG_HnzGafJ9nyhkX455PuD_EAtNg5v1zfSQFto BnI8881PLVL__Im4xu08dxmBK8Pi7ISUbG1vtEBQdZxn4t0Uhk txybdz5NuaITPp5EPthRam0AXhY0TtmSbATKkXL93gqb87nKgV X2bHiy2gb52OaOxkJIQOjsyvVMlS8FrWNyNNvUW03cSzWT0VS4 E2J4Paia0abFiBfsWGBA3n56qyFrY8m7Ryja0kfehPVMdQr6RC zRCgrPcDrOyRA=w1112-h625-no
I used to have a long pipe like this years ago but it got broken (ceramic). These are more comfortable to use than a standard length stem.
https://lh3.googleusercontent.com/NG7rSnJyFM1CBQotZ-Qo_lPo8RHxfuOPqm-KSQVATDIoFSqiMD-QBy5vIN-dhtgtyW66tW87tiEvQzIuxfbH_2oxMiAVq8Cj5QbpPtYtDsKYF wnz3yw8eGk82FYfXbmDhU8s2dphztdhUfbgWX2Mo4V82h6xJ4p-biALltFfl4TNmtvoX_oGU6h1raQPTmB_75wf5W2EaQItHpZYJ_ pMH4Nao4n_B9OLJF9bFH5DYxtA_HfC1NOyJrOJPq7YEOejqMgn DOPb_fnBXDgyt6dJGKtSUpsMgJhCeZ6f1j7KIFzxr1bVwlIRCu uAqSdS6_mnUMQuBaC5Qb0J9SmCFwPq7tjjzA2RCNT36cuZTtlp BIyWyrfHT8lljDcqMo81Cn-CXZ-hjskEVgCYgg2KGRFvfEbR6LkZmS8VouyWaNERd5Bj0h62vp3wi Mb_V1WGBNmLlsIb9a13mX9T8b9FPQ-o9WxJCPluIT_qG_HnzGafJ9nyhkX455PuD_EAtNg5v1zfSQFto BnI8881PLVL__Im4xu08dxmBK8Pi7ISUbG1vtEBQdZxn4t0Uhk txybdz5NuaITPp5EPthRam0AXhY0TtmSbATKkXL93gqb87nKgV X2bHiy2gb52OaOxkJIQOjsyvVMlS8FrWNyNNvUW03cSzWT0VS4 E2J4Paia0abFiBfsWGBA3n56qyFrY8m7Ryja0kfehPVMdQr6RC zRCgrPcDrOyRA=w1112-h625-no
You must have a Gandalf beard and hat?
Or just giant hairy Hobbit feet and a penchant for 2nd breakfast's and crispy bacon?
https://i.imgur.com/XdfaqI6h.jpg
Is that for the Miata? Only driver's side protection?
Yep, for both sides. My car isn't very wide [ROFL1]
ChickNorris
03-26-2019, 18:51
Ridge is your car red? Assuming by your avatar.
It is, that's my car.
https://i.imgur.com/9z8uPASh.jpg
Sick S2000 bro!
I just spit out my dinner.
I've wanted to turbo the shit out of a Miata ever since I discovered www.flyinmiata.com back in high school. Then the Honda S2000 came out and that was my new dream car. Then it went away and there are still plenty of Miata's to be had for way cheaper. If I had a big garage I'd have one just to tinker with.
It is, that's my car.
https://i.imgur.com/9z8uPASh.jpg
Are you autocrossing or racing SCCA?
Flyin' Miata is just down the road from our farm so I often get to see their project cars zoom-zooming along the fruit loop in East Orchard Mesa.
Are you autocrossing or racing SCCA?
Flyin' Miata is just down the road from our farm so I often get to see their project cars zoom-zooming along the fruit loop in East Orchard Mesa.
Time Attack, similar to autocross, but faster and less stringent classing rules.
And yeah, a turbo is in the pipeline for this guy some day.
When you outgrow that Miata you should find an RX-7.
When I was into cars decades ago, I use to have a chart with variable of altitude hp losses by less O2, air resistance relative to change in velocity by compression ratio and volume of cylinder.
When you outgrow that Miata you should find an RX-7.
Gen 3 RX7 (93 to 95) is an awesome car. Just that it is about 24-26 years old and outdated.
Use to drive that during 97 to 99. After warranty and extended warranty expired, I was little nervous back then.
kidicarus13
03-26-2019, 22:39
When I was into cars decades ago, I use to have a chart with variable of altitude hp losses by less O2, air resistance relative to change in velocity by compression ratio and volume of cylinder.That is why you add a larger turbo or turbo x2
That is why you add a larger turbo or turbo x2
...or buy an EV. [Wink]
Great-Kazoo
03-27-2019, 08:35
Time Attack, similar to autocross, but faster and less stringent classing rules.
And yeah, a turbo is in the pipeline for this guy some day.
You should do the Ring in Germany, next.
https://www.nuerburgring.de/en/fans-info/race-tracks.html
Or come down here and do 89A from Chino to Cottonwood, through Jerome.
...or buy an EV. [Wink]
But if he turbos the EV it won?t add any horsepower.
But if he turbos the EV it won?t add any horsepower.
That's what the stickers are for.
I won't buy an EV until they make a whistle tip for them. Woo WOOOOO!
I won't buy an EV until they make a whistle tip for them. Woo WOOOOO!
Just get like 40 of these!
https://i5.walmartimages.com/asr/6f271ae8-d210-4296-9314-f3c01d798142_1.0d2740e417e86f526e40cb18bab4d244.jp eg?odnHeight=450&odnWidth=450&odnBg=FFFFFF
You should do the Ring in Germany, next.
https://www.nuerburgring.de/en/fans-info/race-tracks.html
Or come down here and do 89A from Chino to Cottonwood, through Jerome.
I would probably get killed at Nordschleife.
One of the circuit that you gotta be more cautious than push yourself.
I won't buy an EV until they make a whistle tip for them. Woo WOOOOO!
I have this playing in a loop on the massive screen inside of my Tesla:
https://thumbs.gfycat.com/MilkyIncompatibleIrishwaterspaniel-small.gif
When you outgrow that Miata you should find an RX-7.
Definite dream car right there!
You should do the Ring in Germany, next.
https://www.nuerburgring.de/en/fans-info/race-tracks.html
Nurburgring is a definite bucket list item. My avatar is from Laguna Seca.
https://i.imgur.com/060bUsQh.jpg
https://i.imgur.com/Yt1SPaBh.jpg
wctriumph
03-27-2019, 17:26
I love Laguna Seca.
I went there every year (sometimes twice) from 1975 until 1998. I moved to CO in 1999 and have not had a chance to get back for the motorcycle races. I liked the old track best.
Myself and two friends rode the track one night on a dare, after drinking Jack Daniels. This was probably 1980, '81? I made it three laps and pulled into the camping area and my two friends continued on and were stopped by track security and ejected. We got them back in about an hour later. It was great.
I love Laguna Seca.
I went there every year (sometimes twice) from 1975 until 1998. I moved to CO in 1999 and have not had a chance to get back for the motorcycle races. I liked the old track best.
Myself and two friends rode the track one night on a dare, after drinking Jack Daniels. This was probably 1980, '81? I made it three laps and pulled into the camping area and my two friends continued on and were stopped by track security and ejected. We got them back in about an hour later. It was great.
[ROFL1]
Sick S2000 bro!
Hahahaha!! [ROFL1]
Walker2970
03-27-2019, 18:15
https://www.google.com/maps/place/6814+Saltwater+Blvd,+Hudson,+FL+34667/@28.3494034,-82.7019315,73m/data=!3m1!1e3!4m5!3m4!1s0x88c29b0557b94dff:0xfc62c 962ecaaa74b!8m2!3d28.3494564!4d-82.7017691
Congrats on the new home!
Great-Kazoo
03-27-2019, 20:44
Just get like 40 of these!
https://i5.walmartimages.com/asr/6f271ae8-d210-4296-9314-f3c01d798142_1.0d2740e417e86f526e40cb18bab4d244.jp eg?odnHeight=450&odnWidth=450&odnBg=FFFFFF
Fun Factoid regarding those deer whistles. While they keep deer from jumping in front of you. IF you turn them backwards. You'll call ever deer within a 50 mi. radius to you
I would probably get killed at Nordschleife.
One of the circuit that you gotta be more cautious than push yourself.
Guy down the road a piece. He's maybe mid 70's, he runs his 69 mustang there 1x a year. His wife is not only his pit crew, she builds his motors.
You can do it.
SouthPaw
03-27-2019, 20:52
A couple of goodies for some of my pistolas. SB47 brace and VG6. Bought the draco from Kazoo many years ago.
https://i.postimg.cc/W4k2Sd09/98-F686-FC-3223-4744-B58-D-9-AB164-B3458-C.jpg (https://postimg.cc/8FTQzPKW)
A Colorado compliant mag blocked off to 15 rounds:
https://i.postimg.cc/tJCG0JVG/DCCBF2-FF-4-EDB-4648-9-FFA-48-B2-E295713-F.jpg (https://postimages.org/)
Congrats on the new home!
Word.
Definite dream car right there!
Nurburgring is a definite bucket list item. My avatar is from Laguna Seca.
https://i.imgur.com/060bUsQh.jpg
https://i.imgur.com/Yt1SPaBh.jpg
Corkscrew.
Nice photo.
That corkscrew is NO joke man. First time on that track I goosed the throttle slightly coming over the top and the wheel barely lifted but due to how sharply it falls off it didn't touch back down until near the bottom and I nearly ran wide off the track. Total n00b move. lol TV and photos don't do it justice though as the elevation change is absurd when you're on it. Same with some of the corner banks as you almost touch a knee going around upright if you're on the inside of the corner. Good times.
BladesNBarrels
03-28-2019, 10:00
Congrats on the new home!
Straight shot to the gulf with no bridges!
Heaven!
Straight shot to the gulf with no bridges!
Heaven!
Oof. Where is that? Hurricane alley?
BladesNBarrels
03-28-2019, 16:01
Oof. Where is that? Hurricane alley?
The last major hurricane to score a direct hit on the Tampa Bay region was an unnamed storm that made landfall at Tarpon Springs on Oct. 25, 1921
The last major hurricane to score a direct hit on the Tampa Bay region was an unnamed storm that made landfall at Tarpon Springs on Oct. 25, 1921
So what you?re saying is it?s due for a big one?
The last major hurricane to score a direct hit on the Tampa Bay region was an unnamed storm that made landfall at Tarpon Springs on Oct. 25, 1921
They said the same thing about the Cat 5 that hit Panama City Beach.
Had street truck tacos for the second day in a row today. Never eaten at a truck before and they were great. Samy's at 90th and Federal in the parking lot of the tattoo shop.
https://lh3.googleusercontent.com/pnF26buXUxPh7oQxSDR8ez80yYuDhEfqM0tnePN2l09Rk8B4Rm H9b1-cw330V7oEEKCFAg-wA6jldVdmypMk-8izOYmZ-UcYhYJ-LC1pKmgqjRa1Qk2xhE7vilMAgcRu6bWUPKHYZ4kBSfyJKdak3v cMZ8Woc6j8WMry8QM-nwNxtCZDgEH5n8di5CPzi_mhm1L-jLCgFIeiCKOFp_qx8ppXrwllNXwr9CbOx__aP0B_FXkaw4JvGN 2r9bcE-wPKBbImZTJ6EFV3tC5byBThUOtMmkCGbf2sWIRN3rckZysVNtc itLC7fccKJnu3rJgXkYmDVEmD0BxmPr8p8Zx1GT4NnnBNReEiW SLjpHKDob2MfFoTzUp13ev0kJT5i0VqQHuabpmp3z86YUgznHt Xve3zKqnElEKrld1HZ6Iyb_ST8HJyAsHBEllbujRF5Q0TrKHOT T90dth1UKwB9LhRfRBJspZoQMnb7t9slPN3X6WmkT5wOjCE5ug _uyLo8ZF2cY5B9pnAMxk7A8qaofBkySO6Qj1m6Zv_ehg8pWkGv uT1D1XcQhYnRx4ZfG1P-Q_51UJzVYFkieZmjnrFeqwMylz7deAY-uJjYNYkiNppaf9so8TWiajyr2rQ8WshRENOzkPZbaR5JYehg0f eNJxX-FlFEpSbWWJV=w1112-h625-no
buffalobo
03-28-2019, 22:25
Advantage of being at shop, they come to us.
https://uploads.tapatalk-cdn.com/20190329/26709898768289e4a2934ce11090e724.jpg
Walker2970
03-29-2019, 05:21
Congrats on the new home!
Got a Deal I couldn't pass up and looking to retire / move in 76 days
Bought 2 of Firefield FF73012 light.
One of the LIGHTEST-LIGHT out there.
I goto rec center 4-5 times per week, and the surefire is wayyyy damn too heavy for me to attach that around.
https://i.ebayimg.com/images/g/9cMAAOSwI01cDYiJ/s-l500.jpg
http://www.fire-field.com/images/FF73012_IMG_MAIN_1000.jpg
Bailey Guns
03-30-2019, 20:47
Some new fruit trees. 2 pear, 2 cherry. The larger one on the left side of the mower is a peach. It never produces because there's no other to pollinate it. Gotta get a couple more of those. Also have 3 apple trees to plant.
https://i.imgur.com/Nay92w2.jpg
As long as you don't have any birds or squirrels, you might get some fruit.
Bailey Guns
03-30-2019, 20:49
It's the damn deer that are the problem. A 5 foot fence around the entire garden area is in the works for the next few weeks.
Got the car re-tinted a bit darker.
https://i.imgur.com/vWqKvHph.jpg
Great-Kazoo
03-31-2019, 00:34
It's the damn deer that are the problem. A 5 foot fence around the entire garden area is in the works for the next few weeks.
Besides the wire, plant some rosemary, or russian sage. They have one called ornamental rosemary, grows up 3-4' out to about 6. You can get a starter that's maybe a foot tall. Not only keeps the deer away, it's nice to pick a fresh sprig or two for what ever your cooking.
This also works as a deterrent.
https://frostproof.com/shake-away-coyote-urine-animal-repellent-granules-28-5oz-2851118/?utm_source=TPA%20On%20Google%20Shopping&utm_campaign=TPA&utm_medium=cpc&utm_term=US&utm_content=Shopping&product_partition_id=298110735585&product_id=312&device=c&loc_physical_ms=9030328&gclid=EAIaIQobChMIjMHGr-Gr4QIVbCCtBh0VCAXqEAQYAiABEgJXGPD_BwE
SouthPaw
04-02-2019, 19:24
I’ve made some pretty dumb purchases but I think this is the best $140 I’ve spent in a long time. Now I can be just like the joker with me revolver sniper. I liked it so much that I bought one for the lady as well.
https://i.postimg.cc/0N1ffp6n/0-EAB05-DC-39-EE-48-CD-96-F5-D3-A36043-A306.jpg (https://postimages.org/)
https://i.postimg.cc/52CgLPtj/A577-F4-D7-E52-E-476-A-B08-F-3-F65-CA874-C4-E.jpg (https://postimages.org/)
https://i.postimg.cc/Bv5CwXH0/335-E62-EB-7227-43-CF-A694-F4-AD07158119.jpg (https://postimages.org/)
ChickNorris
04-02-2019, 19:25
Yay!
Southpaw is definitely a winner here today.
Ha! Ever since I was a kid and Hugh O'Brian starred as Wyatt Earp, I've wanted a Buntline Special. This one takes the special to new lengths!
I probably would have spent $140 on that as well. What is the caliber?
SouthPaw
04-03-2019, 05:25
It’s a Heritage rough rider in 22lr. For $140, I bought a second one and bought the extra 22mag cylinder for $29. Can’t wait to shoot them.
Are many available at that price, or is this just a great deal you stumbled upon?
SouthPaw
04-03-2019, 08:26
Are many available at that price, or is this just a great deal you stumbled upon?
It’s hit or miss. I got one from TSS Warehouse and another from Gunbroker. Kentucky Gun is supposed to be getting some in at the $140 mark.
hurley842002
04-03-2019, 09:09
Very nice 3rd gen, a trade not purchase, but new to me. 11 year old factory night sights still have a bit of glow left, impressive. Now to pick up some 40 mags.https://uploads.tapatalk-cdn.com/20190403/aa6a2690e1171cb37cd76cd2b6bb0a8c.jpg
Delfuego
04-03-2019, 12:27
I?ve made some pretty dumb purchases but I think this is the best $140 I?ve spent in a long time. Now I can be just like the joker with me revolver sniper. I liked it so much that I bought one for the lady as well.
https://i.postimg.cc/0N1ffp6n/0-EAB05-DC-39-EE-48-CD-96-F5-D3-A36043-A306.jpg (https://postimages.org/)
Is that a Magnum 88?
https://www.youtube.com/watch?v=Hd-0F4v1C54
F*ck the summer heat
New windows so the office window AC is out. 1985 furnace is on borrowed time. It's been a good run.
https://files.carrier.com/residential/en/us/contentimages/AC_24VNA9_Large.png
https://files.carrier.com/residential/en/us/contentimages/GF_58CVA_Large.gif
https://files.carrier.com/residential/en/us/contentimages/EC_CNPVP_Large.gif
https://files.carrier.com/residential/en/us/contentimages/HUM_HUMCCSBP_Large.gif
https://files.carrier.com/residential/en/us/contentimages/carrier-infinity-system-control-wi-fi-thermostat.png
https://images.homedepot-static.com/productImages/26947ee1-5480-45be-9afc-1343341dfc9c/svn/square-d-individual-subpanels-qo612l100rbcp-64_400_compressed.jpg
Great-Kazoo
04-03-2019, 17:36
F*ck the summer heat
New windows so the office window AC is out. 1985 furnace is on borrowed time. It's been a good run.
https://files.carrier.com/residential/en/us/contentimages/AC_24VNA9_Large.png
https://files.carrier.com/residential/en/us/contentimages/GF_58CVA_Large.gif
https://files.carrier.com/residential/en/us/contentimages/EC_CNPVP_Large.gif
https://files.carrier.com/residential/en/us/contentimages/HUM_HUMCCSBP_Large.gif
https://files.carrier.com/residential/en/us/contentimages/carrier-infinity-system-control-wi-fi-thermostat.png
https://images.homedepot-static.com/productImages/26947ee1-5480-45be-9afc-1343341dfc9c/svn/square-d-individual-subpanels-qo612l100rbcp-64_400_compressed.jpg
That a Carrier whole house humidifier, i see?
That a Carrier whole house humidifier, i see?
Just a bypass humidifier. smaller than it looks in pic, just one of those that hangs off the side of the bonnet.
Infiniti 3T inverter (DC) condenser unit (variable condenser and fan)
Infiniti 80% furnace (variable gas, variable blower)
3.5T evap box
bypass humidifier (got a polarized filter unit too)
Infinity smart controller (guess I need to peddle my brand new ecobee4 I never installed)
Have to add a 100AMP sub panel, my 125A panel is full after the kitchen remodel. They wanted stupid crazy money for a 200A panel. Will give me room to pull another line into my garage, and probably another into the basement.
With the promos and rebates, cashback ,cash discount, mil discount, cost less then the mid grade models and came in under my budget estimate.
Great-Kazoo
04-03-2019, 18:43
Just a bypass humidifier. smaller than it looks in pic, just one of those that hangs off the side of the bonnet.
Infiniti 3T inverter (DC) condenser unit (variable condenser and fan)
Infiniti 80% furnace (variable gas, variable blower)
3.5T evap box
bypass humidifier (got a polarized filter unit too)
Infinity smart controller (guess I need to peddle my brand new ecobee4 I never installed)
Have to add a 100AMP sub panel, my 125A panel is full after the kitchen remodel. They wanted stupid crazy money for a 200A panel. Will give me room to pull another line into my garage, and probably another into the basement.
With the promos and rebates, cashback ,cash discount, mil discount, cost less then the mid grade models and came in under my budget estimate.
You'll wish you went with a 200a down the road. I went from 100 - 200a service to a new panel. 100a to house and 100a to the shop. Throw in i have 5 outbuildings all with power.
You'll wish you went with a 200a down the road. I went from 100 - 200a service to a new panel. 100a to house and 100a to the shop. Throw in i have 5 outbuildings all with power.
I'm landlocked here on a city lot, not going to expand.
If I did ever find a need for a 200A panel, I wouldn't pay an HVAC company stupid money to have one of their electrical subs put one in. I got a guy.
Terrible pic, but behold my new (well used) Aimpoint Comp M2 in the most tactical of configurations.
https://i.imgur.com/shfBxI5.jpg
Had the Springfield RO Elite Compact for a few months now, last weekend picked up it's big brother, the Operator version also in 9. Even more fun to shoot!
https://i.postimg.cc/tCpGTkkR/1DFFACED-31C0-4EB8-A427-15939F5624B4.jpg (https://postimg.cc/LhCbQzGG)
JohnnyEgo
04-05-2019, 20:39
https://www.johnnyego.com/dump/brakes01.JPG
Wife: My brakes feel weird. Can you look at them?
Me: Quantify "weird"
Wife: Oh, they just make a funny sound at the stop lights and when I pull into the garage.
Me: When did you notice this?
Wife: It just started this morning.
https://www.johnnyego.com/dump/brakes02.JPG
https://www.johnnyego.com/dump/brakes03.JPG
For those of us who don't know what we're looking at. What do the pictures show?
JohnnyEgo is it just the one brake or both sides. Frozen caliper piston maybe or even just the slider pin seized? Anyway, the one pad looks new while the other is gone....no bueno
Edit to add:
Nevernind it looks like you're showing the old worn pad against a new one. Those brakes had to be squealing way before this morning...lol.
JohnnyEgo
04-05-2019, 22:26
For those of us who don't know what we're looking at. What do the pictures show?
About $400 in parts and three consecutive hours of swearing punctuated by brief periods of wildly swinging a sledge hammer while eating a lung full of rust and asbestos. Otherwise known as replacing all four rotors and disc brake pads on my wife's minivan.
JohnnyEgo is it just the one brake or both sides. Frozen caliper piston maybe or even just the slider pin seized? Anyway, the one pad looks new while the other is gone....no bueno
Edit to add:
Nevernind it looks like you're showing the old worn pad against a new one. Those brakes had to be squealing way before this morning...lol.
Yep. New pad against old one. They may not have been squealing before this morning, because I am betting the squealers got worn down and then snapped off by heat and metal fatigue while carving a track in the rotors.
Rear brakes were much, much worse than the front ones, which surprised me because I would have thought the proportioning would be heavier towards the front discs. That was the worst of all the pads; driver's rear inner. But I don't think it was from a stuck caliper. It ratcheted back into position relatively smoothly, and the sliders were in good shape. Last time I redid the rears, I replaced the calipers and the rear brake lines, so the boots were still intact and had plenty of grease when I pulled them. What I do suspect with regard to the wear is that the van has been driven more than a mile or two with the parking brake engaged.
Great-Kazoo
04-05-2019, 22:26
For those of us who don't know what we're looking at. What do the pictures show?
Old - new disc pads, which were on the metal backing plate they're bonded to. Looks like he replaced the rotors and possibly calipers as well.
I really dislike doing the brake with wear sensor triggered.
Just ordered 2 "Salmon Relays"
https://www.ecstuning.com/b-genuine-bmw-parts/relay-salmon-red/12631742690/?gclid=Cj0KCQjwnKHlBRDLARIsAMtMHDG_D-Ad5PGOHPJsBev9W5Vd94m40Vt2ug6ixPm3XxjuAJ7NVLumwWwa AnUREALw_wcB
Bailey Guns
04-06-2019, 07:50
Wife: My brakes feel weird. Can you look at them?
Me: Quantify "weird"
Wife: Oh, they just make a funny sound at the stop lights and when I pull into the garage.
Me: When did you notice this?
Wife: It just started this morning.
Are most wives like that?
Me: (First time driving her car for months) How long have your brakes been grinding like that?
Her: What are you talking about?
Me: Don't you hear and feel that when you push the brake pedal?
Her: What? What noise? It sounds normal.
Me: Yeah. It sounds normal because they've been doing it so long. (Shakes head)
Her: Well how much is THAT gonna cost me?
Me: A helluva lot more than it would've 3 months ago.
ChickNorris
04-06-2019, 07:54
Ahahahahahahahaha
Hahahahaha
Great-Kazoo
04-06-2019, 09:16
Are most wives like that?
Me: (First time driving her car for months) How long have your brakes been grinding like that?
Her: What are you talking about?
Me: Don't you hear and feel that when you push the brake pedal?
Her: What? What noise? It sounds normal.
Me: Yeah. It sounds normal because they've been doing it so long. (Shakes head)
Her: Well how much is THAT gonna cost me?
Me: A helluva lot more than it would've 3 months ago.
NO, they're not. My spouse knows if there's an issue while driving, or hears a noise, more than 1x, an inspection is done Last time she said something didn't sound right, the fan clutch was on the way out.
JohnnyEgo
04-06-2019, 11:43
Jim's wife is an exceptional woman. One would have to be exceptional to live with him so long.
Mine, despite being a 'modern' woman, when asked why she waited until the oil pressure light came on to tell me she hasn't had the oil changed in 7,000 miles, will look me square in the eye and say 'That's man's work'.
But if she asked me why the toilets haven't been cleaned and I handed her the brush and said 'That's woman's work', I'd be beaten with it.
It's these sort of inherent logical conundrums that add to the spice of our marriage.
While the brake change gave me the satisfaction of a job well done, this guy just showed up and is something I wanted to spend my money on:
https://www.johnnyego.com/wood/tools/handtools/handtools01a.JPG
It's also bonus season at work, and this year I dumped a chunk of it into hand tools instead of firearms. The first thing to show up are some fancy stones for my plane irons. After 43 years on this earth and a Rubbermade bin full of assorted sharpening tools, machines, and gimmicks,I finally vow to learn how to successfully hand sharpen a thing. Previous efforts at hand sharpening just left me with either a duller edge than I started with, or one with seventeen different bevels that also didn't cut. But this time, it will be different.
https://www.johnnyego.com/wood/tools/handtools/handtools03.JPG
fitterjohn
04-06-2019, 19:41
Tow truck. Finally decided to pull my first/high school car out of the parents place and put it in my garage for a father/son project 77751
Sent from my iPhone using Tapatalk
Very cool.
I can't identify the car, but looks cool.
-John
fitterjohn
04-06-2019, 19:49
84 Camaro z28. My son looks at the high school pic of me leaning on it all the time asking about the car and asking who’s leaning on it. So hopefully it will be fun and spark some mechanical interest into a 6 year old
84 Camaro z28. My son looks at the high school pic of me leaning on it all the time asking about the car and asking who?s leaning on it. So hopefully it will be fun and spark some mechanical interest into a 6 year old
Did you have a biz in front and party in the back haircut in the picture? [emoji1]
ChickNorris
04-06-2019, 21:33
Did you have a biz in front and party in the back haircut in the picture? [emoji1]
Hehehe
OEM
I guess I have to figure out how to install one upside down.
Bought a new replacement OEM grille and the foggy headlights are bugging me. One has a spider crack so not worth trying to polish (again).
https://www.rockauto.com/info/162/55077121AF-1-FRT__ra_p.jpg
https://www.rockauto.com/info/162/55077120AF-0-ANG__ra_p.jpg
fitterjohn
04-07-2019, 08:09
Lol I graduated in 2004 so no I did not, however I did have the perfectly Color match wig for that with a cut off jean jacket vest. I’ll look for the pic
DenverGP
04-07-2019, 08:37
Lol I graduated in 2004 so no I did not, however I did have the perfectly Color match wig for that with a cut off jean jacket vest. I?ll look for the pic
Here I was thinking how lucky you were to have a brand new car in high school.
20 year old car sounds more like it.... I drove a 76 vega in high school.
fitterjohn
04-07-2019, 08:44
I think Vegas are cool. Definitely not a new car. I saved the first grand to buy it and my parents gave me a loan with interest for the rest, under the theory of I don’t have enough credit to go anywhere else lol
JohnnyEgo
04-07-2019, 10:40
`79 Datsun Sentra for me. My father referred to it as 'Birth Control' because it didn't have a back seat (supposed to be there, just missing). But even if it did, it wouldn't have made a difference.
H.S. Cars.
72 Plymouth Duster
71 Vega with a poorly done 302 transplant
65 Notchback Mustang 289 H.O.
Grant H.
04-07-2019, 11:31
I bought my first truck from my older brother for $200, with the agreement that he would help me build it over the next 2 years before I could drive (bought it at 14).
1974 GMC 3/4ton 4x4.
Swapped the motor, body work, new interior stuff, painted it (Ford Tractor Blue of all colors), lifted it, built exhaust for it, etc...
Drove that the whole way through highschool, still had it and drove it on occasion till about 3 years ago. About a year into driving it, swapped the carb for factory tuned port injection off of a corvette.
Good times.
Latest purchase for me... This sumbitch runs off with lugnuts RIGHT NOW!!!! Except for 1.5" lug nuts on our gin pole truck that hasn't had the wheels removed in a few decades... Still takes them off, but has to think about it for a few seconds...
https://live.staticflickr.com/7814/47557513651_a80d27ec34_c.jpg (https://flic.kr/p/2fsuFVV)IR-285B-6-Large-01-01 (https://flic.kr/p/2fsuFVV) by ARNEWB (https://www.flickr.com/photos/61071044@N08/), on Flickr
fitterjohn
04-07-2019, 14:00
I got 2 set of the vett tpi setups with stand alone harnesses. But I think I’ll just got with a holly system this time.
Found a good 3/8" digital torquewrench at a local pawn. Over half off, will test it next and make sure its gtg.
Grant H.
04-07-2019, 14:32
I got 2 set of the vett tpi setups with stand alone harnesses. But I think I’ll just got with a holly system this time.
Holley hadn't gotten into the stand alone EFI stuff when I was 14.
Plus, I bought a 86' vette that didn't run for $600, parted it out keeping the TPI setup and the complete harness to re-wire into a stand-alone (PITA btw, but doable). Sold $1200 worth of stuff off the car... Made TPI cheap for my pickup.
Nowadays though, I completely agree. The Holley Dominator and Terminator setups, with LS motors, is too easy and cheap to not use.
Great-Kazoo
04-07-2019, 16:41
H.S. Cars.
72 Plymouth Duster
71 Vega with a poorly done 302 transplant
65 Notchback Mustang 289 H.O.
H.S. vehicles
1st: 62 Bonny convertible with 4bb 389, full instrumentation $75
then a powder bluish 63 Impala SS. $75
H.S. vehicles
1st: 62 Bonny convertible with 4bb 389, full instrumentation $75
then a powder bluish 63 Impala SS. $75
Wish I had bought the 66 Cuda I looked at instead of that Mustang, and kept either one.
fitterjohn
04-07-2019, 16:50
That’s exactly why the Camaro set at my parents house. Everyone has a I should have keep car. Being said I should have keep the 78 Camaro and the 04 wrx
A car to keep: Tesla Roadster!
[Peep]
Grant H.
04-07-2019, 18:46
That’s exactly why the Camaro set at my parents house. Everyone has a I should have keep car. Being said I should have keep the 78 Camaro and the 04 wrx
I can't think of a car that I have owned that I wish I would have kept.
In fact, I can only think of 1 thing that falls into that category...
A car to keep: Tesla Roadster!
[Peep]
Gross.
Great-Kazoo
04-07-2019, 19:54
Wish I had bought the 66 Cuda I looked at instead of that Mustang, and kept either one.
Shoulda, coulda, woulda. Should of kept the 49 Merc & Ford, the 62 Bonney, 51 this, 69 that etc.
Know what i would have out of all of them, today? A pile of rust, from moving here and there. They were $50 - 150 tops vehicles, back then. Who would have "thought" a 64 SS or 48 Indian Chief ( in 74-75) would bring the money they are today? .
Wonder what my Nissan Hatchback will bring in 20 yrs [ROFL3]
fitterjohn
04-07-2019, 19:59
You want a trip, look up what people are getting for 200 series zcars.
Great-Kazoo
04-07-2019, 20:05
You want a trip, look up what people are getting for 200 series zcars.
Use to call the 240Z a mini vette .
electronman1729
04-07-2019, 20:26
77754
Programable air pump for the car for paddle board and summer lake fun
https://uploads.tapatalk-cdn.com/20190409/e1c9137c3ac5a5a3cdd48a65536c7a3f.jpg
Got this from the wild animal sanctuary for my wife's birthday. I really like it. We've had bare walls at our place for long it's actually nice to have some stuff hanging up.
https://lh3.googleusercontent.com/aYvQF1K_KtP6TVLKBFea6EwrRzdDu7wEsscd0uYJQeXaSwFvZP uVNdAO1FY9miHRRexUaA8fr8zSFsiczYJ8uKg3U0-Wy4UKPoRBcSvh9vvbArOZY1tEqwHdl_PUyH374CxgEPF80kzT7 HnispE1eDZjUH4UU8oLrU8pcICbMIkbsbN4tKhnQjSBDOpr1-3f6E-Uj5UMTp9ke1ZbS46eyJOs8X3ivb9MNz9MisvMZMxZ-Bu9zW3uhGG61BJuf1mtH6sK6wdyY3uBlwLEE7Ghr_3Hlch5BMZ 9VDSFZOuemAV_Qc8s62YJfPtWo-ofhszmZOLtQo5wWOj_SelKQKtQJ0HgJmKvNjqzUEHy9fUY8PNE 9xVeIz7LTtcjqqboKXRmvrkn4k7sNH0XLdiWTuYg7FOq2f4NpK PJ8Sc1vCE5Yb2GmHB5sBmVQDScN--hHsmNTRcuRFbPCIyM4JjjUgOg6dFIcnXD-PScOG9epVS4TCl8IIedBiZ0jaD_pUQnhQ9PZiI5uSicceBe5De 5R4we0QNvhLs4eplCyG7gRPFg9Ha3ntYAN_j_EY60D4ACyvERi f-b2relr6dj6by-5bPLBLB7wsQw2WpNX2Hks3T7qVYRpKTo6F_S39hMFEc2hv_Vmc u3p2rMjTpPY93dU4gk_GuX76Mt-BcOo9tyUmudsdS6ovlI0qt35vYm-E_yOjiSB3FHpS_xDzs7C4RxrrFMobUFQQ=w1112-h625-no
Got this from the wild animal sanctuary for my wife's birthday. I really like it. We've had bare walls at our place for long it's actually nice to have some stuff hanging up.
https://lh3.googleusercontent.com/aYvQF1K_KtP6TVLKBFea6EwrRzdDu7wEsscd0uYJQeXaSwFvZP uVNdAO1FY9miHRRexUaA8fr8zSFsiczYJ8uKg3U0-Wy4UKPoRBcSvh9vvbArOZY1tEqwHdl_PUyH374CxgEPF80kzT7 HnispE1eDZjUH4UU8oLrU8pcICbMIkbsbN4tKhnQjSBDOpr1-3f6E-Uj5UMTp9ke1ZbS46eyJOs8X3ivb9MNz9MisvMZMxZ-Bu9zW3uhGG61BJuf1mtH6sK6wdyY3uBlwLEE7Ghr_3Hlch5BMZ 9VDSFZOuemAV_Qc8s62YJfPtWo-ofhszmZOLtQo5wWOj_SelKQKtQJ0HgJmKvNjqzUEHy9fUY8PNE 9xVeIz7LTtcjqqboKXRmvrkn4k7sNH0XLdiWTuYg7FOq2f4NpK PJ8Sc1vCE5Yb2GmHB5sBmVQDScN--hHsmNTRcuRFbPCIyM4JjjUgOg6dFIcnXD-PScOG9epVS4TCl8IIedBiZ0jaD_pUQnhQ9PZiI5uSicceBe5De 5R4we0QNvhLs4eplCyG7gRPFg9Ha3ntYAN_j_EY60D4ACyvERi f-b2relr6dj6by-5bPLBLB7wsQw2WpNX2Hks3T7qVYRpKTo6F_S39hMFEc2hv_Vmc u3p2rMjTpPY93dU4gk_GuX76Mt-BcOo9tyUmudsdS6ovlI0qt35vYm-E_yOjiSB3FHpS_xDzs7C4RxrrFMobUFQQ=w1112-h625-no
Awesome. I love that place, though always a bit of a trip seeing the big cats in snow.
https://i.imgur.com/0GnCFtO.jpg
https://i.imgur.com/z6VeW4l.jpg
^^^^
I really dig it Irving !
Do not see it on their website. I would like to know the dimensions ?
It was a display piece. They are all reasonable priced at $70. Dimensions are 36"w x 24"h
77781
Colt .22 Automatic, "pre-woodsman" 6-1/2 " pencil barrel. ca.1919
JohnnyEgo
04-10-2019, 22:06
Things I didn't really need, but man did I want them.
https://www.johnnyego.com/wood/tools/handtools/handtools02.JPG
Bailey Guns
04-11-2019, 08:55
The dirt doesn't stand a chance now...
https://i.imgur.com/BvoSfcj.jpg
newracer
04-11-2019, 10:43
https://i5.walmartimages.com/asr/7355a76d-ea60-4db5-88e4-b9f1ab85b772_1.0dd83dba4ae51eaf1373dc20b9f3401a.jp eg?odnHeight=450&odnWidth=450&odnBg=FFFFFF
BladesNBarrels
04-11-2019, 11:01
The dirt doesn't stand a chance now...
https://i.imgur.com/BvoSfcj.jpg
Looks like you are ready to homestead that Idaho plot!
https://i.imgur.com/3313Zgn.jpg
Bailey Guns
04-11-2019, 11:42
Yep...gotta get them spuds outta the ground.
[Coffee]
Breaking ground to build yourself an Ikea?
Bailey Guns
04-11-2019, 18:41
Don't be throwin' shade on my farming implements...
I?ve made some pretty dumb purchases but I think this is the best $140 I?ve spent in a long time. Now I can be just like the joker with me revolver sniper. I liked it so much that I bought one for the lady as well.
https://i.postimg.cc/0N1ffp6n/0-EAB05-DC-39-EE-48-CD-96-F5-D3-A36043-A306.jpg (https://postimages.org/)
https://i.postimg.cc/52CgLPtj/A577-F4-D7-E52-E-476-A-B08-F-3-F65-CA874-C4-E.jpg (https://postimages.org/)
https://i.postimg.cc/Bv5CwXH0/335-E62-EB-7227-43-CF-A694-F4-AD07158119.jpg (https://postimages.org/)
Been looking for something similar since you posted this. Darn things are out of stock everywhere.
I put in for email notifications from several vendors when they get them back in stock.
SouthPaw
04-12-2019, 17:19
Gun broker has a few.
Sent from my iPhone using Tapatalk
My gunbroker search skills must be weak. I couldn't find any there.
I asked at Ark Tactical and Noah ended up calling Heritage. They said the long barrel pistols hadn't been officially released yet. They are going to be increasing shipments of them over the next few months. So I am waiting patiently.
On a side note he found out Taurus has owned Heritage for over 15 years. They are still being made in in the same factory in Miami.
A YouTube Heritage factory tour video link by Kentucky Gun Co.-
https://www.youtube.com/watch?v=0JzYA97qgpU
https://computerroom-my.sharepoint.com/personal/jbs_computerroom_com/Documents/Documents/Guns/6mmCreedmoor/Shared/20190413_120941%20-%20Copy-scaled.jpgAck. Can't figure out images, sorry.
https://computerroom-my.sharepoint.com/personal/jbs_computerroom_com/Documents/Documents/Guns/6mmCreedmoor/Shared/20190413_120941%20-%20Copy-scaled.jpg
-Johnhttps://computerroom-my.sharepoint.com/personal/jbs_computerroom_com/Documents/Documents/Guns/6mmCreedmoor/Shared/20190413_120941%20-%20Copy-scaled.jpg
SouthPaw
04-13-2019, 14:52
My gunbroker search skills must be weak. I couldn't find any there.
I stand corrected, looks they are out of stock everywhere. Guess I just caught them when they had a few out. Seems like the prices are going up to which I figured they would. I’ll keep my eye out for any if I see them.
travisty4
04-14-2019, 09:20
The wife?s bday gifthttps://uploads.tapatalk-cdn.com/20190414/6d959f152d4c118a749074b5619b4b18.jpg
Sent from my iPhone using Tapatalk
"Honey, I got you a pretty dress.....for your GLOCK!!!"
The wife?s bday gift
I'm not familiar with Glock accessories. Who is the manufacturer/model of that setup?
Installed the new headlights and grill in the old gal.
Got a great deal on OEM Mopar(lights) at Rock Auto.
https://i.imgur.com/RrKe9UB.png
These had been "polished" once before but only lasted a year before hazing up again.
https://i.imgur.com/ojeANgT.png
Great-Kazoo
04-14-2019, 15:28
I'm not familiar with Glock accessories. Who is the manufacturer/model of that setup?
That's the RONI Stabilizer frame, Command Arms carries them
I just told my wife
"We should get a micro roni."
She was interested until she found out what it was.
She thought it was a name of a pasta. [ROFL1]
SouthPaw
04-17-2019, 21:14
The old lady didn’t like the M&P that I got her (hence why it’s listed) so we got this instead. I’m pretty impressed with it so far, we will see how it shoots this weekend.
https://i.postimg.cc/s2z7xxQG/D49-D872-E-EE3-C-40-FB-B542-33-C9-EC6-F6-DEA.jpg (https://postimg.cc/gxMnBYKG)
Bought a minor video card upgrade from a coworker, I went from a GTX980 to a GTX1070.
https://i.imgur.com/uc4uAPrh.jpg
I also finally got the last two parts needed to finish a couple builds.
https://i.imgur.com/aJC8siRh.jpg
https://i.imgur.com/gQUrvOxh.jpg
https://i.imgur.com/bi9waUM.jpg
newracer
04-19-2019, 21:05
https://cdn.shopify.com/s/files/1/2694/2808/products/5lb-co2-super-bracket-aluminum-power-tank-main_480x480.jpg?v=1519327771
Grant H.
04-19-2019, 21:07
Found someone selling off 3, BNIB, of one of my favorite ZT knives that have been discontinued for a while.
https://live.staticflickr.com/65535/46923747374_10d5296ab6_c.jpg (https://flic.kr/p/2euuti9)20190419_210227[1] (https://flic.kr/p/2euuti9) by ARNEWB (https://www.flickr.com/photos/61071044@N08/), on Flickr
https://i.imgur.com/bi9waUM.jpg
That looks like it would tuck nicely into the console of my truck.
That looks like it would tuck nicely into the console of my truck.
Oh it would! It's a perfect fit and I got the 4 digit upgrade lock.
Can I ask how much something like that would cost me? And maybe where I could get one?
Can I ask how much something like that would cost me? And maybe where I could get one?
This is the one I got...$304 with the upgraded lock but I bought mine like new used off craigslist[Awesom]
https://www.consolevault.com/dodge-ram-2500-3500-full-floor-console-2009-2011.html
Also check these guys out....the 4 digit combo lock is standard.
https://www.lockerdown.com/i-30-console-safe-2009-to-2018-dodge-ram-1500-2500-3500-model-ld2028.html?ref=category:35
Not sure but I think Lock'er Down on some models have an open bottom using the floor of the console rather than a 6 sided vault box....if that makes sense? They also offer an electronic lock but they're damn proud of it as well as their rear floor bin vaults for Ram.
Oh and if you have the CD player in the console, they both offer versions that fit around it.
Found someone selling off 3, BNIB, of one of my favorite ZT knives that have been discontinued for a while.
https://live.staticflickr.com/65535/46923747374_10d5296ab6_c.jpg (https://flic.kr/p/2euuti9)20190419_210227[1] (https://flic.kr/p/2euuti9) by ARNEWB (https://www.flickr.com/photos/61071044@N08/), on Flickr
Pretty!
Glock 43.
https://i.imgur.com/OFgsvjV.jpg?1
Allow me to introduce the newest member of our family: "Apollo 3"
2014 Tesla Model S P85D in Multi-Coat Red on black w/carbon fiber interior trim & black alcantara headliner along with every single option available in 2014.
https://lh3.googleusercontent.com/3kj9_5BYb-R4mZC8RN27mbOzgU9OZrbhLbV41ShWjrewHjLiZgRlGNRf7Nzq Re95sQ-1YrXZfGavrwZbeBPHpxigivlesSSz5xNJ2xZyysP_HSW7sBUpq JN-QogaRU6KUgOdVjK4_4E=w2400
https://lh3.googleusercontent.com/NxfMzMgtM93wuf2C8Sxc0cbkAWVL8cwSIQNJQavpSf0wdcTMdJ HqC9xWUmWKtM8cZXVbTyViQGf4FzSDt1pn4aV6ZtiAptM5C1sw _OxvOSzJ1NdyuXZ_ESZdQkOQ-esRHrjKnEfP-2s=w2400
https://lh3.googleusercontent.com/G2Oc-H199vxDUpD5axqp3iFlG6pme0_Cv0Xu-Fn2nZpmxMpu2BzVgSYxGXnj-iGqdITP2D00__PFtfBT9A2MWBYRv6xCZdvCsNUJa3yA3jERogv j18sqRVW1AvauNkOeznq1EXDkScw=w2400
https://lh3.googleusercontent.com/w027QrB1i4ENfqEE8ksX_Ha3AdQFRNMorzy6eGjIxT28Vwa12O Nz562WDzqw1yw7bQzjmpBvmJkyFeNToWontkmOAOp-AAK-fd_Hk37LUSU-chJXTXpMbkoNIt9gXKPQdqwQlAIA-kY=w2400
Very fancy, Jer!
Thank you sir. With 0-60 blasts in about 3 seconds it's awfully fun to drive.
ChickNorris
04-20-2019, 08:53
Thank you sir. With 0-60 blasts in about 3 seconds it's awfully fun to drive.
That red is lovely
That red is lovely
Thanks. It's a little more flashy than my usual taste but after seeing the Multi-Coat red in person I had to have one. Probably some sort of midlife crisis situation. Haha
The irony of the NGK sign is fantastic!
The irony of the NGK sign is fantastic!
[Beer]
Bought a minor video card upgrade from a coworker, I went from a GTX980 to a GTX1070.
https://i.imgur.com/uc4uAPrh.jpg
I could eat out of that computer case. Amazingly clean, your last downgraded video card is doing hard time in comparison.
I could eat out of that computer case. Amazingly clean, your last downgraded video card is doing hard time in comparison.
Hahaha yeah, the computer was built only at the end of January. The 980 is a carryover from the old machine.
JohnnyEgo
04-21-2019, 00:45
Hammer Time!
https://www.johnnyego.com/wood/tools/handtools/bshammerc.JPG
fitterjohn
04-21-2019, 07:13
I did the complete opposite of jer. But for 200$ how could you go wrong for a parts car. Or as my son says his first Camaro so now him and daddy match. https://uploads.tapatalk-cdn.com/20190421/5cabd28414781ad804d36dafffce6ed4.jpg
Sent from my iPhone using Tapatalk
I did the complete opposite of jer. But for 200$ how could you go wrong for a parts car. Or as my son says his first Camaro so now him and daddy match. https://uploads.tapatalk-cdn.com/20190421/5cabd28414781ad804d36dafffce6ed4.jpg
Sent from my iPhone using Tapatalk
Opposite? I see a kick ass American made redish car that a human male will cherish for years to come. Seems about the same to me.
Hammer Time!
https://www.johnnyego.com/wood/tools/handtools/bshammerc.JPG
STORMBREAKER!!!!
[Coffee]
Hammer Time!
https://www.johnnyego.com/wood/tools/handtools/bshammerc.JPG
Almost look like wooden version of Thor hammer.
JohnnyEgo
04-21-2019, 15:43
Wife said the same thing. Then something about 'So is Chris Hemsworth also in that box?' Only one of us is disappointed. This thing is truly a beast. Resin infused maple head with a leather face, the theory being it is kinder to western-style chisel handles than a conventional metal hammer head when you are whacking the crap out of them. The wooden mallet unfortunately also tends to wear faster. In theory, being resin-infused is supposed to give me the best of both worlds; a little bit of give but a rock hard surface that will take the abuse. I know I carved out a foot and a half of half-inch mortise in some hard maple yesterday, and I had to resharpen the chisel three times, but there was nary a mark on the mallet head.
Most woodworkers pride themselves on making their own hammer, and while I respect that choice, I am not that good with a rasp and don't have a vacuum infusion chamber. Plus, I like supporting small businesses that produce high quality goods when I can.
And I thought maybe you were taking up cobbling.
buffalobo
04-21-2019, 18:27
Hammer Time!
https://www.johnnyego.com/wood/tools/handtools/bshammerc.JPG
One of the most time tested tools ever invented.
That one looks almost a pleasure to use.
Reminds me I owe a carving project to Mrs bo.
I did the complete opposite of jer. But for 200$ how could you go wrong for a parts car. Or as my son says his first Camaro so now him and daddy match. https://uploads.tapatalk-cdn.com/20190421/5cabd28414781ad804d36dafffce6ed4.jpg
Sent from my iPhone using Tapatalk
What year is it? 1983ish? I had the sister car to the Camaro, a 1982 Trans Am that I drove off the lot brand new....got it replaced by GM in 1984 because there were sooo many problems with the 82. The 84 was a different car although it looked identical. Shifting was a dream and virtually every problem from 82 was fixed.
Those look like the stock wheels, within 6 months of new I think I had lost every wheel cover. If you went over railroad tracks over 15 mph or so you just knew to stop and go back and get the one or two that flew off.
I have to admit I miss the 84.
fitterjohn
04-22-2019, 06:04
It’s an 83. The odometer says 84k miles. The interior is piled up inside from being stripped but none of the fabric looks like a ton of wear. With the expection of 2 panels the body is pretty straight. I have the big choice to make. The 6 year old wants to keep it to make it his car. The old lady says get the parts off it I need and it’s gone
It'll be 10 years before he can really drive it. I doubt a 6 year old would be very helpful in restoration. Something better will come along and which piques his interest once he is say... 14. That would be the better time to do a restoral/first car.
fitterjohn
04-22-2019, 08:40
Yea that’s the thought I had originally. I’m going to make him help me pull parts and see how long it takes him to loose interest. She said it’s not going to be like buying rifles where I can keep bringing things home and saying well it was a good deal and this one isn’t for me it’s for Harley when he is older. And she also said it isn’t going to be a car for her like the rifles I bought because they would be good for her, and to stop buying her rifles she doesn’t want them lol
You?re going to put your kid driving a Camaro in the snow? Probably the only worse vehicle in the snow is a Mustang.
Don?t get me wrong, father/son projects are awesome and rear wheel drive V-8 vehicles rock. I just wouldn?t feel comfortable having a kid that?s new to driving trying to get around in a Camaro on a snowy day.
fitterjohn
04-22-2019, 10:17
I started driving my 84 Camaro with a 350. That being said I think those 350s made an incredible 135 hp and I had to drive the Jeep when it snowed. That being said My kids would probably get a v6
Lol. Be careful about the V-6 if it?s a newer one. I think those things make over 300HP.
fitterjohn
04-22-2019, 10:54
Lol no I know a guy who has the correct one for an 84 Camaro. And they couldn’t get out of their own way. It’s like a friend I had in high school who’s parents couldn’t believe mine let me buy a Camaro with a v8, but they had bought their son a new Subaru wrx, cuse how could that go wrong, it’s just a 4 cylinder Subaru
My kid is eleven and I think her first car might end up being electric. Interesting time for parent/kid builds for sure. I might end up having to learn about electric vehicles at the same time that she does.
fitterjohn
04-22-2019, 11:42
I remember going to mechanic school in 2005 wanting to learn about hybrids and electric cars. Always said to people then that’s the future of racing. Still today though one thing electric cars will never have is the thump of an aggressive cam, and the looks that follow it when you pull up to a light
SouthPaw
04-22-2019, 11:57
I remember going to mechanic school in 2005 wanting to learn about hybrids and electric cars. Always said to people then that’s the future of racing. Still today though one thing electric cars will never have is the thump of an aggressive cam, and the looks that follow it when you pull up to a light
As Kazoo once told me many years ago when I was buying jap bikes vs Harley's
"What's all that speed without class?"
fitterjohn
04-22-2019, 11:58
Per Usual he has a good point it’s hard to argued with
My kid is eleven and I think her first car might end up being electric. Interesting time for parent/kid builds for sure. I might end up having to learn about electric vehicles at the same time that she does.
My wife's boss got one of the new Tesla Model 3's and is teaching his 15 year old daughter to drive on it. Whenever she "has" to drive her mom's Volvo SUV she hates it. For us it's an adjustment to drive EVs after a lifetime of driving ICE cars so for me it's interesting to hear the differences from someone coming from the other way. Our cars have got a lot of attention but none more than with kids. They're constantly asking to take pictures of them or selfies with them and even ask if we can take pics of them in front of them. Kids love these cars which is cool to see.
fitterjohn
04-22-2019, 13:01
Kind of like wood vs synthetic. It will be interesting to see what he turns out to like
I'd die of old age before I completed a list of things that 15 year-old girls "hate."
Shit just got real at the Irving household.
https://lh3.googleusercontent.com/Qh6b8QUyOwLIrCJmKSwDVZcq-4SBSobg1jSC2d71ww627sbWcMpP4SizyydpFCo7GxSUJwYSkcA 4InmYDr6jjNxFpSgZmhQyi_XYvObWw_y8-VRmaazY40ncs-cWrhe3-9YN-RReXi7vuKEAGsXo2IbSiEQV3rLMzcNoRewtZglZv6L3mW0ttt0 VzKSfmW2JOghZG1yp9ItJS422vg8B0X2HymRF25anAdbwbJljc dVxG3FgjFclXXj4rSi0eV5gPOE9ffBW4dLoRiadcVQvgrRPfnG 6MvoKHPBzTn_OftkKpnN9erhu-TbLJHIR36vrGZ_KSQsdks_IJkR01U3z33RSurzCPbkwZQc993P INHw0g5d3UviCgsQGhaw4aqQP_DXWXZJJ6pTloUU6F0JDR5Vk1 D0HVi3xWXHAJzdjbplDaZQUDxsf2jDJ0K36J0BeaqLP75oatnl 88L_wa2j2NQt8yCkS3jQJv8p_FQ5qwAj_mGCmBmZF4hpt0iHnW gu3_NGPsVjDRTyFuvR0GL3IVvx_sk8jDs0aWjMSRrLJox4ruix wvFP2vPExkke2BMr-xFLmEYXNMTDIXFLVeL4tRrDjW2RYTdrpDPQGyCtYvTMVVmg_-X47UMAsfVOWgZF-xK6P-8Ynmp5VQ162BSud3nWAwXTTYErUVZ0idM9CeNDlpIbeh6BKLPd lFtR3k-TuWOWOnLPU_8v6opNfzXWZhcMTaA=w1112-h625-no
Great-Kazoo
04-22-2019, 14:13
I'd die of old age before I completed a list of things that 15 year-old girls "hate."
Or get upset about.
Nextzett Gummi Pflege Stift
https://i.ebayimg.com/images/g/LxYAAOSwz4xcZob8/s-l1600.jpg
Great-Kazoo
04-22-2019, 23:38
With my cash back i paid $40, couldn't pass it up.
https://www.amazon.com/STX-International-STX-3000-TF-Turboforce-Electric/dp/B0012KJBR0
Bought this snake oil after a little research. We'll see if it works as many claim (~2 years).
P.S. Amazon shows a 2-pack and it was only a single so a quick chat and I got it free...
https://images-na.ssl-images-amazon.com/images/I/51HUkQS7y1L._SL1000_.jpg
There's an awful lot of German-Made penis enlarging cream on this page.
Great-Kazoo
04-23-2019, 15:15
There's an awful lot of German-Made penis enlarging cream on this page.
Based on the size of the applicator, they need them.
There's an awful lot of German-Made penis enlarging cream on this page.
https://d9nvuahg4xykp.cloudfront.net/4062766501455854388/-5937660934573536087.jpg
Based on the size of the applicator, they need them.
A few drops goes a LONG way.
A few drops goes a LONG way.
Ouch....[facepalm]
Based on the size of the applicator, they need them.
Ouch.
https://d9nvuahg4xykp.cloudfront.net/4062766501455854388/-5937660934573536087.jpg
These are creams/oils, clearly from Germany. The Sweedes are known for the pumps.
Ouch.
These are creams/oils, clearly from Germany.
Best way to keep a Telefunken U47 in working order.
Bailey Guns
04-26-2019, 16:48
I have a stick welder and mig welder and I wanted to learn to do tig stuff. So I finally broke down and bought the new multi-process welder I've been wanting. Now I can sell the others and free up some space. I've read very good things about them but we'll see. I'm pretty impressed with the initial look and feel of it. Need to wire up a 50A outlet in the shop so I can have some fun with this.
https://i.imgur.com/qwN0qz6.jpg
Great-Kazoo
04-26-2019, 20:25
Was bored, so i purchased a boat anchor.
Stock, right down to the rims and radio. Even had the original owners manual with vin # and original buyers name in it.
https://i.imgur.com/AMtySJPm.jpg
https://i.imgur.com/IzVt2PBm.jpg
https://i.imgur.com/fwQbK3Hm.jpg
https://i.imgur.com/4hFsvPTm.jpg
https://i.imgur.com/Ew1HQXQh.jpg
Looks really clean, how many miles on that girl?
Great-Kazoo
04-26-2019, 23:30
Looks really clean, how many miles on that girl?
Thanks
142K. The nice thing about most AZ vehicles is minimal if any rust or body rot. The bad thing is minimal or zero body rot/rust.
I looked at 4x4's that literally looked showroom, body wise. Till you saw they had 200 - 350K on them, lifted with 33's, yet no one seemed to know who did the work.
The other down side is, like CO it's rare to find an under 100K odo unit.
Anyway, this 88 was in the ball park price range i wanted to stay in. 4.0 inline 6 cyl, plus it's still a stock suspension, and drive train, unlifted unit. Eventually i'll do a 2 maybe 3" lift kit. After 1/2 doz other projects ahead of it.
hurley842002
04-26-2019, 23:43
Was bored, so i purchased a boat anchor.
Stock, right down to the rims and radio. Even had the original owners manual with vin # and original buyers name in it.
https://i.imgur.com/AMtySJPm.jpg
https://i.imgur.com/IzVt2PBm.jpg
https://i.imgur.com/fwQbK3Hm.jpg
https://i.imgur.com/4hFsvPTm.jpg
https://i.imgur.com/Ew1HQXQh.jpgNice rig! 142k miles is not even broken in yet for that 4.0, I've owned 4 of those Cherokees, with my first one being an 88 that made it to 290k before it quit on me, and it wasn't the motor that gave, it was an electrical issue I didn't want to deal with. I'd love another Cherokee, and I pretty much know them inside and out if you have any questions.
New electronic cam lock retrofitted to my console vault!
https://i.imgur.com/PBYkYOX.jpg
Great job on the Cherokee. Damn hard to find an unmolested one. That 4.0 6 will last almost forever.
Picked up a Mesa Tactical pistol grip buttstock and a Vortex Venom red dot for my Mossberg
https://scontent.fapa1-1.fna.fbcdn.net/v/t1.0-9/59387677_10218347565061972_3112631952679632896_n.j pg?_nc_cat=110&_nc_ht=scontent.fapa1-1.fna&oh=e273d542c367fef9ebcdbfc33fefd84f&oe=5D737980
New case for my recurvehttps://uploads.tapatalk-cdn.com/20190428/9cbcd0c2e99a333a0abc0edd1d648d1a.jpg
https://uploads.tapatalk-cdn.com/20190428/e6d528a0fbf018b41ab4140996c209db.jpg
Sent from my iPhone using Tapatalk
Picked up a Mesa Tactical pistol grip buttstock and a Vortex Venom red dot for my Mossberg
https://scontent.fapa1-1.fna.fbcdn.net/v/t1.0-9/59387677_10218347565061972_3112631952679632896_n.j pg?_nc_cat=110&_nc_ht=scontent.fapa1-1.fna&oh=e273d542c367fef9ebcdbfc33fefd84f&oe=5D737980
Very nice! I loved the Mesa Tactical stock on my 1100 when I had it. How do you like the 930? I want to get a semi auto shotgun again, but don't care for modern Remington's QC.
JohnnyEgo
04-28-2019, 12:36
Was bored, so i purchased a boat anchor.
Stock, right down to the rims and radio. Even had the original owners manual with vin # and original buyers name in it.
https://i.imgur.com/AMtySJPm.jpg
https://i.imgur.com/IzVt2PBm.jpg
https://i.imgur.com/fwQbK3Hm.jpg
https://i.imgur.com/4hFsvPTm.jpg
https://i.imgur.com/Ew1HQXQh.jpg
Man that's nice! Guess you needed something with better snow performance, huh?
Powered by vBulletin® Version 4.2.3 Copyright © 2026 vBulletin Solutions, Inc. All rights reserved.