The post whore thread.

[BuffCyclist]

So belly, how'd the powder dropper dispenser thingys work? Is one more accurate or faster than the other?

[BuffCyclist]

Building the Position 2, very nice background commentary:

"We've got a lot of new shooters that are embracing firearms and shooting, but many of them have no idea what they are doing"...

All while belly is doing an instructional video to teach people (us) who have no idea what we're doing [LOL]

[TheBelly]

So belly, how'd the powder dropper dispenser thingys work? Is one more accurate or faster than the other?

The Lyman is faster once it warms up. It takes 30 minutes to warm up. It already has a 'straw mod' as part of its design.

The RCBS is more deliberate, but it takes only 10 seconds to warm up. It requires a McDonald's straw to be inserted in the tube to eliminate clumping and dumping of a large pile of powder when it starts the slow trickle to get 0.1gr more.

both are equally accurate at dropping powder into a tray.

[TheBelly]

Building the Position 2, very nice background commentary:

"We've got a lot of new shooters that are embracing firearms and shooting, but many of them have no idea what they are doing"...

All while belly is doing an instructional video to teach people (us) who have no idea what we're doing [LOL]


That was Eric. Retired cop who spent 2 years as a police trainer in Afghanistan. He doesn't have a volume control.

[TheBelly]

"Some crazy {poop} has gone down lately. Did you see my new .30 caliber skylight over bench #7?"

[BuffCyclist]

Ahahaha, I was trying to understand what he was talking about with a 30 caliber something.

Admit it, it was you. You needed more light for your plethora of cameras[Poke]

[TheBelly]

He would have punch me straight in my head if I mortared a round.

[TheBelly]

And: "quite a few of them {new shooters} are fortunate enough to know that bullet comes out the end of the barrel."

[HoneyBadger]

Jr is finally in bed and I've been doing my best over the last 2 hours not to throw up on him.

Whatever this is, it really sucks donkey d!ck. hopefully I feel better in the morning. See ya hos later

[TheBelly]

Best of luck HB and HB jr!

[OtterbatHellcat]

Best of luck HB and HB jr!

+ 1

[OtterbatHellcat]

Goodnight fellers, hope we have a decent week.

[buffalobo]

Mo Money - Mo Problems. And nothing yet. Going over to a buddy's house in a little bit though.





Run? who run's? Fitness = way to much work.

This^^^^. [AR15]

[BuffCyclist]

Well I gott say hos, you are boring the crap outta me tonight.

[BuffCyclist]

Please don't make me entertain myself. You all saw how it turned out last time. It wasn't pretty. No one enjoyed it.

[BuffCyclist]

Besides, I only have about an hour before I head home, and that isn't enough time for a run so I've got a doctors note, I can't do a run.

[TheBelly]

A friend posted this on facebook, it is scary accurate and for those of you who have never had the pleasure of a telecon, this is what you've been missing.


https://www.youtube.com/watch?v=DYu_bGbZiiQ&feature=share


MY tcf meetings (tele-conference meetings) are a tight ship.

if you're late, you don't join. I you're not set up and entered minimum 5 minutes prior, you don't join.

i am an absolute a-hole about meeting timelines, including the length/duration of the meeting. If its a half hour meeting, I'm walking out at 30:01, unless there's an eagle or a star at the head of the table.



This is where my unit does have our poop in a group. With units in four states, there's no time for dilly-dallying.

[waxthis]

Wazzz up whores...........

[HoneyBadger]

Well, HB Jr and I are both feeling a little better this morning. I had a fever of 104 last night that broke around 2am. I ended up getting about 5 hours of decent sleep. We'll see how the day goes.

I just hope the dog doesn't get sick with this crap... I don't think I could deal with the dog spraying diarrhea all over the place. [pileoshit]

[mcjhr]

http://www.factzoo.com/sites/all/img/birds/two-blue-footed-boobies.jpg

Nice pair of boobies!

[HoneyBadger]

well, things are getting a little better at the HoneyBadger house. No poop has been sprayed in at least 4 hours.

[mcjhr]

well, things are getting a little better at the HoneyBadger house. No poop has been sprayed in at least 4 hours.

That's good news! Glad you all are feeling better!

[HoneyBadger]

That's good news! Glad you all are feeling a little better!

FIFY. It's a huge improvement over yesterday, that's for sure!

What are you up to today?

[mcjhr]

FIFY. It's a huge improvement over yesterday, that's for sure!

What are you up to today?

Digorno in the oven....called magpul, they want me to ship it to them in Erie...he said turn around is usually a day. I think ill just do that. Other than that I went jogging @ 5am came na k fell asleep. Now I'm just getting nagged by the ex......the usual. Prolly do some dry fire practice.

[mcjhr]

They better add some cool swag in the return box if I have to pay for shipping. I should just hand deliver it.

[HoneyBadger]

They better add some cool swag in the return box if I have to pay for shipping. I should just hand deliver it.
Yeah, usually they throw in stickers and stuff. How are are you away from their place?

[HoneyBadger]

Digorno in the oven....called magpul, they want me to ship it to them in Erie...he said turn around is usually a day. I think ill just do that. Other than that I went jogging @ 5am came na k fell asleep. Now I'm just getting nagged by the ex......the usual. Prolly do some dry fire practice.
Dang, pizza sounds really good. I must be feeling better!

[Great-Kazoo]

Dang, pizza sounds really good. I must be feeling better!

Just chowed down on 2 hot dogs smothered with some hot salsa. Would have done chili, but wiped that out saturday.

[HoneyBadger]

A hot dog right now would totally make me puke.


Actually, a hot dog any time would make me puke.

[mcjhr]

Yeah, usually they throw in stickers and stuff. How are are you away from their place?

Stickers? What am I 4yrs old? Better be some dust covers or a damn low count mag! I shouldnt have to pay for their screw up.

[mcjhr]

Polish dog from Costco sounds good! Pile on the sauerkraut!

[mcjhr]

And onions! I can't wait until I'm old and can say whatever I want.

[BuffCyclist]

MY tcf meetings (tele-conference meetings) are a tight ship.

if you're late, you don't join. I you're not set up and entered minimum 5 minutes prior, you don't join.

i am an absolute a-hole about meeting timelines, including the length/duration of the meeting. If its a half hour meeting, I'm walking out at 30:01, unless there's an eagle or a star at the head of the table.

This is where my unit does have our poop in a group. With units in four states, there's no time for dilly-dallying.

How many people do you have calling normally?

I have two calls on Tuesday, one Wednesday, a new videocon on Wednesday, and one the first Thursday of every month. We typically have between 10 and 30 or more people, calling in from locally, across the US, Mexico, Japan, Chile. It can be very frustrating at times when people call in late and the leader restarts the meeting to catch them up to speed. [facepalm] THAT'S WHAT THE MINUTES ARE FOR!

[BuffCyclist]

UPS woke me up, the driver rang the doorbell like he was being mauled by a cougar.

Needless to say, I can't fall back asleep, so I guess its time to just get up.

[BuffCyclist]

Just got a call from the bakery that made our wedding cake.

Bakery - "Hi, I'm calling to schedule the appointment for your wedding cake tasting this Saturday"
Me - "Uh, I got married last October. Who was it left the voicemail?"
Bakery - "[My Wife's Name]"
Me - "Well, that is my wife, but we got married in October. Let me call you back and make sure she didn't call to schedule an appointment for something else".

Turns out it was just a voicemail from almost a year ago and it was never deleted. Was thinking it could be a cake for [one of our many] our anniversary or something like that.

[LOL]

[HoneyBadger]

You turned down a cake tasting session?! Lol

[BuffCyclist]

I think the wedding rings would have given it away. Plus, she would have recognized us once we went in there, but that could have been a fun way to get free cake!

[mcjhr]

BC that's classic! Especially the "uhhh".

Do you like to dance?

[mcjhr]

You turned down a cake tasting session?! Lol

No cake for you sickly steve!

[mcjhr]

Where is udders bats and cats?

[Ridge]

http://www.youtube.com/watch?v=8EsO83qRYEk

[mcjhr]

It's too cold outside.

[Ridge]

Come on, it's a brisk 18 degrees. But heavier snow is starting to fall down here.

[mcjhr]

It's still light here but getting a bit heavier. Ground us starting to freeze up so its sticking more. Hopefully more wed/thus

[HoneyBadger]

No cake for you sickly steve!
:(

[mcjhr]

HONEYYYYYBADGGGGGEEERRRRRRR!

[BuffCyclist]

Sigh, somehow I knew selling a laptop for parts was a bad idea.

Buyer emailed me saying the battery was completely dead and it doesn't work at all. I replied telling him to plug it in and charge it. [facepalm]

Did he really think I left it charging for the past several months since I replaced it?! During the auction, the laptop powered up just fine and I even posted pictures of screenshots for some performance tests.

It would be nice though if USPS marked it as delivered so that paypal will release my money.

eta: He is now claiming the battery won't hold a charge and therefore that I misrepresented the item (in the ad I stated that it "worked great when we used it last a few months ago before replacing it"). The only thing I mentioned about the battery, was that it was included. It was a 7 day auction and he had plenty of time to email me asking about the condition of the battery, before he bid, if that is the only reason he purchased the laptop. Based on his auctions for sale, he obviously purchases laptops for parts, refurbs them, and resells them on ebay, so he's probably pissed that he didn't get a brand new battery along with other parts, to turn around and sell for triple what he paid.

[HoneyBadger]

HONEYYYYYBADGGGGGEEERRRRRRR!

Yes?

[mcjhr]

Yes?

Hi

[mcjhr]

Sigh, somehow I knew selling a laptop for parts was a bad idea.

Buyer emailed me saying the battery was completely dead and it doesn't work at all. I replied telling him to plug it in and charge it. [facepalm]

Did he really think I left it charging for the past several months since I replaced it?! During the auction, the laptop powered up just fine and I even posted pictures of screenshots for some performance tests.

It would be nice though if USPS marked it as delivered so that paypal will release my money.

eta: He is now claiming the battery won't hold a charge and therefore that I misrepresented the item (in the ad I stated that it "worked great when we used it last a few months ago before replacing it"). The only thing I mentioned about the battery, was that it was included. It was a 7 day auction and he had plenty of time to email me asking about the condition of the battery, before he bid, if that is the only reason he purchased the laptop. Based on his auctions for sale, he obviously purchases laptops for parts, refurbs them, and resells them on ebay, so he's probably pissed that he didn't get a brand new battery along with other parts, to turn around and sell for triple what he paid.

Typical eBay BS.

[HoneyBadger]

Hi
Hiiiii

[mcjhr]

Hiiiii

http://img.tapatalk.com/d/14/01/28/7y9e2ube.jpg

Should make you feel better, courtesy of BC!

[Great-Kazoo]

Sigh, somehow I knew selling a laptop for parts was a bad idea.

Buyer emailed me saying the battery was completely dead and it doesn't work at all. I replied telling him to plug it in and charge it. [facepalm]

Did he really think I left it charging for the past several months since I replaced it?! During the auction, the laptop powered up just fine and I even posted pictures of screenshots for some performance tests.

It would be nice though if USPS marked it as delivered so that paypal will release my money.

eta: He is now claiming the battery won't hold a charge and therefore that I misrepresented the item (in the ad I stated that it "worked great when we used it last a few months ago before replacing it"). The only thing I mentioned about the battery, was that it was included. It was a 7 day auction and he had plenty of time to email me asking about the condition of the battery, before he bid, if that is the only reason he purchased the laptop. Based on his auctions for sale, he obviously purchases laptops for parts, refurbs them, and resells them on ebay, so he's probably pissed that he didn't get a brand new battery along with other parts, to turn around and sell for triple what he paid.

It was sold as parts, as is. Screw him, he purchased it.

[BuffCyclist]

It was sold as parts, as is. Screw him, he purchased it.

Yup, exactly. I stated this at the bottom of the ad, and when creating the ad, checked the "No returns" box (which it also states on the page, but it says its also covered by the ebay moneyback guarantee). "This is being SOLD AS IS and NO RETURNS will be accepted."

In research of the moneyback guarantee, if the buyer makes a complaint for WHATEVER reason, saying they did not receive what was described (with no proof needed to say it wasn't as described), ebay will intervene and force me to issue a refund, or issue a refund on return of the part, or they will just steal the funds from my paypal account (cause ebay owns paypal).

If the buyer returns the item and ships it back, all they have to do to scam me and keep the parts is pay for the postage online indicating a specific weight and ship me back an empty box. When I report this to ebay, they tell me to take a picture of the box shipping label, which indicates a weight and therefore, shows they shipped back what I sent. So then ebay says [goFyourself], the buyer keeps the product and his money.

[TheBelly]

How many people do you have calling normally?

I have two calls on Tuesday, one Wednesday, a new videocon on Wednesday, and one the first Thursday of every month. We typically have between 10 and 30 or more people, calling in from locally, across the US, Mexico, Japan, Chile. It can be very frustrating at times when people call in late and the leader restarts the meeting to catch them up to speed. [facepalm] THAT'S WHAT THE MINUTES ARE FOR!

I have a minimum of 16 people call in. The most I've had was about 70 or so. That was for a Brigade level Annual Training Meeting. I missed the fact that a couple folks were going to call in. They were late and asked me to catch them up. I told them that they should have called in on time.... I found out later that one of them was the Deputy Commanding General-Support. I had a few words spoken to me after that meeting. I stood up for myself.

After that, my Eagle came and told me, "If nothing else, you're not an ass kisser."

[BuffCyclist]

Wow, 70 people would definitely be a lot and order MUST be maintained. Heck, we have a hard time sometimes telling people to put their phones on mute if they aren't speaking. I don't understand why thats so hard!

And good for you, higher ups shouldn't be above the rules or receive special treatment.

[TheBelly]

Yup, exactly. I stated this at the bottom of the ad, and when creating the ad, checked the "No returns" box (which it also states on the page, but it says its also covered by the ebay moneyback guarantee). "This is being SOLD AS IS and NO RETURNS will be accepted."

In research of the moneyback guarantee, if the buyer makes a complaint for WHATEVER reason, saying they did not receive what was described (with no proof needed to say it wasn't as described), ebay will intervene and force me to issue a refund, or issue a refund on return of the part, or they will just steal the funds from my paypal account (cause ebay owns paypal).

If the buyer returns the item and ships it back, all they have to do to scam me and keep the parts is pay for the postage online indicating a specific weight and ship me back an empty box. When I report this to ebay, they tell me to take a picture of the box shipping label, which indicates a weight and therefore, shows they shipped back what I sent. So then ebay says [goFyourself], the buyer keeps the product and his money.


Easy fix: Don't use Ebay.

[BuffCyclist]

Yea, I won't be using ebay again (except on the buying end because apparently, that's where ALL the protection lies).

Just hoping the buyer doesn't push the issue and I get my money.

[mcjhr]

Yea, I won't be using ebay again (except on the buying end because apparently, that's where ALL the protection lies).

Just hoping the buyer doesn't push the issue and I get my money.

Yup eBay can be scam city. I've seen the empty box scam on knives. He said she said. I used it twice. Once to buy once to sell. Buying was great, selling.....not so much. EBay takes a 10% cut. Screw them.

[HoneyBadger]

It's still light here but getting a bit heavier. Ground us starting to freeze up so its sticking more. Hopefully more wed/thus
Same thing now down here.

[HoneyBadger]

I have a minimum of 16 people call in. The most I've had was about 70 or so. That was for a Brigade level Annual Training Meeting. I missed the fact that a couple folks were going to call in. They were late and asked me to catch them up. I told them that they should have called in on time.... I found out later that one of them was the Deputy Commanding General-Support. I had a few words spoken to me after that meeting. I stood up for myself.

After that, my Eagle came and told me, "If nothing else, you're not an ass kisser."
I think the most I've ever had on telecon was about 30, but I've had 55+ on VTC... We had so many cameras on the net that I couldn't see everyone at once because our giant TV screen only divided up 16 ways. Add in about a 1 second delay, and it was a mess trying to keep things in order. I had to tell people to raise their hand if they had a question so I could call on them, otherwise, several people would be trying to talk over each other.

We have one guy (our lead Lockheed engineer) who was always overly polite on VTC and telecons... People would talk at the same time as him (which naturally happens) and he would always insist that they go ahead... which was unfortunate, because they would usually say something silly or incorrect, and he would have to correct them anyway. He was one smart dude.

[mcjhr]

I've never had a telecon...... :(

[Great-Kazoo]

Yea, I won't be using ebay again (except on the buying end because apparently, that's where ALL the protection lies).

Just hoping the buyer doesn't push the issue and I get my money.

Send him an empty envelope, with this note. Sorry, due to the current ID theft of electronic transactions, i have decided to refund your money in a personal check.

[HoneyBadger]

I've never had a telecon...... :(
LOL you're not missing out...

[mcjhr]

I take that back. I had to go to a incident meeting when my coworker got hurt and there were ppl from foco on the phone. And another time when discussing 401k benefits some guys from foco were on the phone. Yay me!

[HoneyBadger]

Well, I'm starting to lose my mind... lol

I don't think I could be a full time stay at home dad.

[HoneyBadger]

Kiddo is sitting on my lap while I play Infected mode on COD: Ghosts.

[Great-Kazoo]

Well, I'm starting to lose my mind... lol

I don't think I could be a full time stay at home dad.

It's the hidden clause in the contract that screws you over. Like laundry, cooking, cleaning, shopping, bills etc.

[HoneyBadger]

Is this bad parenting? lol

[HoneyBadger]

It's the hidden clause in the contract that screws you over. Like laundry, cooking, cleaning, shopping, bills etc.
Yup. I'm having a hard time keeping up with all that... but I am not managing my time well either.

[HoneyBadger]

BTW, Walmart on Powers and Woodmen had a whole bunch of ammo today. Pricey, but they had it. I'll post in the intel thread in a few minutes.

[OtterbatHellcat]

Howdy ho's....

:D

[OtterbatHellcat]

[teabag]
Snow !!


[sheepshagger]

Cold temps and wind !!

[OtterbatHellcat]

Glad you're feeling a *little* better HB, Jr. too.

[HoneyBadger]

Glad you're feeling a *little* better HB, Jr. too.
Yeah, I think i'm about 80% recovered now. With him, it's so hard to tell, because he mostly just plays and eats and sleeps unless something hurts. He hasn't complained much throughout all of this. He just lets his diapers tell the story: [pileoshit]

[HoneyBadger]

[teabag]
Snow !!


[sheepshagger]

Cold temps and wind !!


lol yup.

[OtterbatHellcat]

Heck, another couple days, and ya'll be right as can be.

[OtterbatHellcat]

Belly, that took some cohjones, brother.

Right On.

[HoneyBadger]

Heck, another couple days, and ya'll be right as can be.
Yeah, but I'm missing a lot of work and that work isn't gonna do itself.

[HoneyBadger]

unfortunately.

[OtterbatHellcat]

Well, yeah....that part of it does kinda suck a bit too.

[OtterbatHellcat]

Shit, I'd better be gettin to practicin'.

[HoneyBadger]

lol see ya OBC

[HoneyBadger]

lol HB Jr just crawled into the dog cage and closed himself in. Makes my job easier.













JUST KIDDING. Don't call CPS on me...

[HoneyBadger]

I'm thinking about selling my 7.5" 5.56 upper and looking for a .300blk SBR upper to run suppressed for home defense. Good idea? Bad idea?

[mcjhr]

Well, I'm starting to lose my mind... lol

I don't think I could be a full time stay at home dad.

I did it for year with newborn twins and a 3yr old. Not so much parenting as it is damage control.

[mcjhr]

Howdy ho's....

:D

Hello there wise one!

[HoneyBadger]

I did it for year with newborn twins and a 3yr old. Not so much parenting as it is damage control.
Yeah, I'm beginning to understand that with just 1... I can't imagine 3!

[mcjhr]

I'm thinking about selling my 7.5" 5.56 upper and looking for a .300blk SBR upper to run suppressed for home defense. Good idea? Bad idea?

Get a OU or SxS shotgun. :)

[HoneyBadger]

Get a OU or SxS shotgun. :)
Not interested in another shotty right now

[wax_job]

Sup whores, you are especially whorish tonight

[mcjhr]

Sup whores, you are especially whorish tonight

http://img.tapatalk.com/d/14/01/28/u2ugyveb.jpg

[brutal]

How many people do you have calling normally?

I have two calls on Tuesday, one Wednesday, a new videocon on Wednesday, and one the first Thursday of every month. We typically have between 10 and 30 or more people, calling in from locally, across the US, Mexico, Japan, Chile. It can be very frustrating at times when people call in late and the leader restarts the meeting to catch them up to speed. [facepalm] THAT'S WHAT THE MINUTES ARE FOR!

This

I had a client last year from Ecuador and they were consistently late, not ready, trying to get their computer audio working, etc.

Then they bitched about the time we were billing them.

[brutal]

Come on, it's a brisk 18 degrees. But heavier snow is starting to fall down here.

WTF?

It was 78* today

[BuffCyclist]

This

I had a client last year from Ecuador and they were consistently late, not ready, trying to get their computer audio working, etc.

Then they bitched about the time we were billing them.

Wait, are you talking minutes as in time (billed for call) or minutes as in notes? Cause I was talking about minutes as in notes.

[brutal]

Wait, are you talking minutes as in time (billed for call) or minutes as in notes? Cause I was talking about minutes as in notes.

Time billed on a project - including the time we spent on calls. And we bill by the hour.

I didn't misunderstand your post. I know what minutes are BC.

[BuffCyclist]

Ah, gotcha, so you understand the frustration with people asking for recaps when minutes exist and will be emailed shortly, in addition to talking about billing people for minutes that they waste. I think I'm on the same page now. Maybe. [LOL]

[HoneyBadger]

You guys are weird.

[wax_job]

You guys are weird.

*raises hand*

Yup.

[HoneyBadger]

*raises hand*

Yup.
[Wave]

[OtterbatHellcat]

*raises hand*

Yup.

Yeah, but it's a cool kind of weird.

[wax_job]

One of us, one of us

[wax_job]

Gooble gobble gooble gobble

[OtterbatHellcat]

Lots O cool folks here, and glad to be a member at this board.


Only one more day to muck through, and BINGO......Humpday, we see the camel again, hell yeah.

Friday is only another day away from that........sheeeeeeeit.


Happy Tuesday, bitches. Goodnight.

*peace out*

[Great-Kazoo]

I'm thinking about selling my 7.5" 5.56 upper and looking for a .300blk SBR upper to run suppressed for home defense. Good idea? Bad idea?

sell the bbl , everything else is the same. Why are you going to sell one caliber for another? Do you have all the components to load 500-1K, like tomorrow? if not shit can the idea till you can.

[hghclsswhitetrsh]

Hey hoes.

[HoneyBadger]

sell the bbl , everything else is the same. Why are you going to sell one caliber for another? Do you have all the components to load 500-1K, like tomorrow? if not shit can the idea till you can.
It's got a JP handguard and KX3 that I also want to sell, leaving me with just the upper receiver... So I figured I would sell it as a complete unit.

[HoneyBadger]

Hey hoes.
What's up dude?

[hghclsswhitetrsh]

Just another good night of training. Damn I feel good.

[Great-Kazoo]

It's got a JP handguard and KX3 that I also want to sell, leaving me with just the upper receiver... So I figured I would sell it as a complete unit.

Why? all you need is a bbl. Everything else is interchangeable. Why spend money all over again? Used pistol uppers don't seem to be moving all that well, anywhere.
The 2nd question. Not that it needs to be put on line. Just figure the logistics out.

1- Suppressor, either way you need one, There's $1K by the time you're finished

2 - Complete upper $$ ?? 300 seems to be the current 5.45x39 flavor of the month, so bbls are almost premium priced, plus the accessories to go with it.
There's a 300 upper w/out BC/B/CH/ on arfcom for $350, it's had 250 views but no takers, to date.

3- Components $308 bullets, powder, Brass (no problem there) primers

4- working up loads for your intended use, then locating everything for that load.

Your investment wil run $500 + for upper + basic load development then $1k for the suppressor. Which you should get first, before anything else,.

[HoneyBadger]

Why? all you need is a bbl. Everything else is interchangeable. Why spend money all over again? Used pistol uppers don't seem to be moving all that well, anywhere.
The 2nd question. Not that it needs to be put on line. Just figure the logistics out.

1- Suppressor, either way you need one, There's $1K by the time you're finished

2 - Complete upper $$ ?? 300 seems to be the current 5.45x39 flavor of the month, so bbls are almost premium priced, plus the accessories to go with it.
There's a 300 upper w/out BC/B/CH/ on arfcom for $350, it's had 250 views but no takers, to date.

3- Components $308 bullets, powder, Brass (no problem there) primers

4- working up loads for your intended use, then locating everything for that load.

Your investment wil run $500 + for upper + basic load development then $1k for the suppressor. Which you should get first, before anything else,.
I understand that I can just swap the barrel, but I want to change the handguard to something lighter weight, and obviously you can't attach a suppressor to a KX3. I don't need the handguard or the KX3, so I may as well sell them and put that money toward the next goal.

[mcjhr]

Holy shit! Just jogged 2.4 miles.......havent done that in years!

Also had snot in my beard. :(

[mcjhr]

I'm damn hungry!

Sup late night hos?

[HoneyBadger]

I'm just about to hit the sack. It's been another long day.
Peace! [rockon]

[brutal]

morning ho's.

[bogie]

Morning haux's!

[bogie]

So are planes landing in Denver today? I don't want to get stuck in this sewer today...

[buffalobo]

So are planes landing in Denver today? I don't want to get stuck in this sewer today...

Have not heard otherwise. Cold and slick though.

[bogie]

Thanks, I'm optimistic!

[buffalobo]

There are currently 9 users browsing this thread. (1 members and 8 guests)

You guests enjoying your coffee this morning?

[buffalobo]

Guess what sewer bogie is trying to get out of.

St Louis

Philly

Detroit

are my three guesses.

You NSA guys don't give it away, ok.[Coffee]

[hghclsswhitetrsh]

Guess what sewer bogie is trying to get out of.

St Louis

Philly

Detroit

are my three guesses.

You NSA guys don't give it away, ok.[Coffee]

My guess is Memphis or Minneapolis

[TheBelly]

Bogie is trying to get out of your moms house.

[Mazin]

Roads are slick in some spots and jeffco as usual sucks

[BuffCyclist]

Can any geniuses make an educated guess what height these rings will be? The seller hasn't returned my email.

The guy claims they're Badger Ordnance Low in the title, then Medium in the description, and #13102 isn't anywhere to be found online as a "model number". At $75 (auction will probably end around $100), it might be a good deal. If not, I might get some TPS rings, heard they're great alternatives to BOrdnance.

http://www.ebay.com/itm/321304165010?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

[buffalobo]

Bogie is trying to get out of your moms house.

Lol, well played, but my mom would beat him like a red headed step child. :eek:

Sent from my electronic ball and chain.

[Great-Kazoo]

Can any geniuses make an educated guess what height these rings will be? The seller hasn't returned my email.

The guy claims they're Badger Ordnance Low in the title, then Medium in the description, and #13102 isn't anywhere to be found online as a "model number". At $75 (auction will probably end around $100), it might be a good deal. If not, I might get some TPS rings, heard they're great alternatives to BOrdnance.

http://www.ebay.com/itm/321304165010?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

Give em a call



1209 Swift Ave, Kansas City, MO ‎ (816) 421-4956

[BuffCyclist]

Yea I know, I don't have time. I'm heading out the door in a few minutes and won't get home until after it sells. Thanks for the phone number though, I'll see if I can find time at some point.

And for the rest of you hos, no sniping! [LOL]


eta: In other words, I did not think of calling them, so thanks for smacking some logic into me [Beer]

[TheBelly]

Can any geniuses make an educated guess what height these rings will be? The seller hasn't returned my email.

The guy claims they're Badger Ordnance Low in the title, then Medium in the description, and #13102 isn't anywhere to be found online as a "model number". At $75 (auction will probably end around $100), it might be a good deal. If not, I might get some TPS rings, heard they're great alternatives to BOrdnance.

http://www.ebay.com/itm/321304165010?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

don't get them. get the TPS rings and be done with it.

TPS is the 'minimum' quality-for-price set that I would use.....

[HoneyBadger]

Guess what sewer bogie is trying to get out of.

St Louis

Philly

Detroit

are my three guesses.

You NSA guys don't give it away, ok.[Coffee]
I'm going to write-in vote for Chicago

[HoneyBadger]

Oh wait, we weren't talking about ACTUAL sewers? Then I change my vote to DFW.

[HoneyBadger]

Buy Larue. Never cry again. [LOL]

I don't know a lot about rings, but I haven't ever been disappointed with a Larue ring purchase. That's the only insight I can offer on this subject.

[HoneyBadger]

Roads are slick in some spots and jeffco as usual sucks
Schriever and Peterson AFB have a 2 hr delay for the second day in a row.




SNOWPOCALYPSE!!!!!

[HoneyBadger]

Yeah, we got about an inch of snow. I'm beginning to think this is Texas or something... Cancel everything because there is snow in the forecast!!

[mcjhr]

Morning hose!

[waxthis]

What I miss?

[mcjhr]

What I miss?

Not much.....

[HoneyBadger]

What I miss?
Absolutely nothing.

[HoneyBadger]

I'm about to list my SBR upper (pistol upper if you're not cool) in the Trading Post... HINT HINT

Yes, this one:


40025

[waxthis]

roberth show up yet? Have a feeling my Ghost pepper may have killed him...:(

[waxthis]

I'm about to list my SBR upper (pistol upper if you're not cool) in the Trading Post... HINT HINT

Yes, this one:


40025

Sweet..........It shoots shotgun shells?

[HoneyBadger]

Sweet..........It shoots shotgun shells?
Not this one ;)

[HoneyBadger]

Boom. posted: https://www.ar-15.co/threads/124901-7-5-quot-5-56-Pistol-Upper?p=1497961#post1497961

[hghclsswhitetrsh]

Do whores get a whore discount on that upper? Haha jk...

[HoneyBadger]

Do whores get a whore discount on that upper? Haha jk...
What did you have in mind? ;)

[hghclsswhitetrsh]

[fail] I'm sorry I'm just trolling. At least you don't ignore me.

[gohome]

[HoneyBadger]

[fail] I'm sorry I'm just trolling. At least you don't ignore me.

[gohome]
lol it was a chance I was willing to take.

[hghclsswhitetrsh]

Nice.

[HoneyBadger]

What's up?

[hghclsswhitetrsh]

Just about done with lunch then back to the grind. An HVAC tech is either a hero or zero on days like this.

[HoneyBadger]

Just about done with lunch then back to the grind. An HVAC tech is either a hero or zero on days like this.
Yeah, hopefully this is my last day staying home from work with a sick kid.

[TheBelly]

fingers crossed over here for ya, Buddy!

[mcjhr]

I hope this stock fits in the small USPS box. Maybe just use a padded envelope! ;)

[mcjhr]

Yeah, hopefully this is my last day staying home from work with a sick kid.

Poor lil guy :(

[TheBelly]

I just get the $1 small padded envelope and throw it in there. That way you're not using up flat rate shipping charges.

If it can fit into a quart size zip lock bag, it can fit into one of those envelopes. $1 + $2.85 is still better than $9 for a flat rate box.

[mcjhr]

I just get the $1 small padded envelope and throw it in there. That way you're not using up flat rate shipping charges.

If it can fit into a quart size zip lock bag, it can fit into one of those envelopes. $1 + $2.85 is still better than $9 for a flat rate box.

I just paid $12 to ship it. Should've gone that bubble envelope route. Oh well. Lesson learned. I just pray it doesnt go to Erie via Chicago. At this rate I should've got the CTR!

[mcjhr]

I also need to send these firehouse pants back to Duluth trading for a new pair. Lifetime guarantee! 6 months of climbing trees ate them up pretty good.

[HoneyBadger]

you building treehouses?

[BuffCyclist]

Ever have one of those days where you reply to 5 emails and get 10 emails back in response from various people?

Sigh, I just can't catch up right now!

[mcjhr]

you building treehouses?

Hah! I wish.....just was a lowly tree trimmer. How's the sick house doing?

[HoneyBadger]

Hah! I wish.....just was a lowly tree trimmer. How's the sick house doing?
mostly better. I think it's back to work for me tomorrow.

[HoneyBadger]

mostly better. I think it's back to work for me tomorrow.
...And I spoke too soon. HB Jr just had a really bad blow out. :(

[BuffCyclist]

Oh nooesities (thats how my wife and I speak to our dogs), a bad blow out?! That's not good!!

Poor HB Jr! We're all rootin' for you to get better bud! :(

[HoneyBadger]

Man, f*ck socialized medicine... [Rant1]

[HoneyBadger]

Man, f*ck socialized medicine... [Rant1]
The only reason anyone would want this sh!t is so they can freeload.

[BuffCyclist]

Sigh, I almost hate having real world experience when taking classes.

In the lab manual for our slot car, the two ends of the rear axle have call outs for "8-32 UNC-2B" threads. For starters, 2B is an INTERNAL thread, so it makes no sense for the wheel to have 8-32 UNC-2B threads, and the axle to have the same thing. That's like trying to screw a nut into a nut. It doesn't work, unless you're sitting down and crush your boys.

Furthermore, the OD of the rear axle is SMALLER than the minimum allowed major diameter of 8-32 UNC-2A (what I assume they meant, being external threads), so again, the rear axle shaft would most likely just slide right through any 8-32 UNC-2A die, or at the very least be threaded so minimally that the thread engagement is pathetic and can barely be called UNC-2. [facepalm]

[BuffCyclist]

Sigh, real world problems, nitpicking thread classes... [Shake]

Well, I spent my entire afternoon replying to emails and attempting to make heads or tails of this lab manual. Its horrible when you correct so many problems (these weren't the only ones) to the instructor/TA and they had no clue. But it does make you feel better knowing that you're the only person who will notice things like that [LOL]

[mcjhr]

Sounds like you should be teaching the course! ;)

[BuffCyclist]

Sounds like you should be teaching the course! ;)

Funny you should mention that! The lecture instructor (same level of education as me, but with 20yrs industry experience compared to my 3.5yrs) has already stopped asking the class questions and has started looking at me asking me to explain things [LOL].

On the other hand, I guarantee the lab instructor (in the machine shop) has MUCH more experience than me, mostly because I've never used a CNC Milling Machine and he's got 3 different kinds in the shop and even a 5-axis CNC Milling Machine [Shock]

[HoneyBadger]

Funny you should mention that! The lecture instructor (same level of education as me, but with 20yrs industry experience compared to my 3.5yrs) has already stopped asking the class questions and has started looking at me asking me to explain things [LOL].

On the other hand, I guarantee the lab instructor (in the machine shop) has MUCH more experience than me, mostly because I've never used a CNC Milling Machine and he's got 3 different kinds in the shop and even a 5-axis CNC Milling Machine [Shock]
What the heck is a 5-axis CNC?!

[HoneyBadger]

And can you get me one? ;)

[BuffCyclist]

It's a 4-axis CNC milling machine with the ability to rotate the part like on a lathe. See this:

http://www.albitech.org/uploads/pics/empaler_on_hass.jpg

And no, I will not get you one. If I could afford one, it would be sitting in my garage already and I'd be churning out parts. What would the parts go to? I have no clue, but I'd be churning them out! [LOL]

eta: The tool can move in X, Y, Z axes. The part holder can rotate changing the angle of the z-axis. Then, the part can also be spun in the toolhead like on a lathe.

[HoneyBadger]

Awesome sauce

[mcjhr]

Mill some lowers!

[HoneyBadger]

Mill some lowers!
Paging the ATF, come in ATF...


that is, unless you make them for personal use only or you get the appropriate firearms manufacturing license.

[HoneyBadger]

Or maybe I read your post totally wrong. We're you talking about making some cool holes in your lowers? ;)

[BuffCyclist]

I have considered it, making firearms would be fun.

Although, I have also designed a suppressor, as well as performed the finite element analysis on it, but I haven't quite decided to pay for the tax stamp because my machining skills aren't up to par for the constraints I would need.

But with this 5-axis cnc, I could TOTALLY build it. After I applied for the tax stamp of course.

And if my current career falls through, I would highly consider something like that, designing/building/selling suppressors. If I recall, with the proper license to manufacture and sell suppressors, you only need to sell a minimum of 6 per year, so I could currently apply for it and then just sell the first 6 at super discounted prices so people would be crazy NOT to buy one.

Hmm... now you've got me thinking about it again!

[HoneyBadger]

I have considered it, making firearms would be fun.

Although, I have also designed a suppressor, as well as performed the finite element analysis on it, but I haven't quite decided to pay for the tax stamp because my machining skills aren't up to par for the constraints I would need.

But with this 5-axis cnc, I could TOTALLY build it. After I applied for the tax stamp of course.

im not sure what the rules are for building your own suppressor... DADT? Lol

[HoneyBadger]

I'm watching HEAT right now on TV while waiting for my homemade lasagna to cook. Life isn't terrible.

[BuffCyclist]

Its a form 1, you can build your own but you have to add a serial number of some sort (if I recall) and still file for a tax stamp and still $200.

[HoneyBadger]

Its a form 1, you can build your own but you have to add a serial number of some sort (if I recall) and still file for a tax stamp and still $200.
Yuck. That's insulting to the mentally impaired.

[HoneyBadger]

Yuck. That's insulting to the mentally impaired.
And by that, I mean the NFA laws are f*cking stupid and unconstitutional.

[HoneyBadger]

but I'm just a little peasant... what do I know about controlling the masses? [Dunno]

[HoneyBadger]

and I scared everyone off by talking about the NFA...

[HoneyBadger]

Alright then, i guess I'll just do some slow whoring...

[HoneyBadger]

McJunior, I see you... and 10 NSA guests..

[bogie]

Touchdown... back from Beantown

[HoneyBadger]

What's up spies?

[HoneyBadger]

Touchdown... back from Beantown
yay! Welcome back! You get 1 point. Boston is a sewer.

[bogie]

I have 2 inches of legroom

[HoneyBadger]

I have 2 inches of legroom
That's exciting. I like small spaces.

[mcjhr]

McJunior, I see you... and 10 NSA guests..

I need lasagna right meow!

[mcjhr]

Touchdown... back from Beantown

Welcome home!

[bogie]

I'm waiting

[bogie]

Thanks haux!

[HoneyBadger]

I need lasagna right meow!
Almost done....

[HoneyBadger]

Actually just when I made that last post, the oven timer went off! It needs just a couple more mins, then it'll need about 10 mins to cool. I'm so hungry!!!

[Great-Kazoo]

I have 2 inches of legroom

Try surgery .

[bogie]

I need lasagna right meow!

Garfield the cat

[Great-Kazoo]

Paging the ATF, come in ATF...


that is, unless you make them for personal use only or you get the appropriate firearms manufacturing license.

ANYONE CAN make 80% lowers.

[HoneyBadger]

ANYONE CAN make 80% lowers.
Your mother can make 80% lowers


[ROFL1]

[Great-Kazoo]

Your mother can make 80% lowers


[ROFL1]

My mom's dead. She ain't making nothing.

[mcjhr]

All I need is a piece of metal and a drill press. BOOM! Got me a lower!

[mcjhr]

Not looking forward to tonight's jog. Sore as all hell. But Charlie is getting stronger......

[HoneyBadger]

My mom's dead. She ain't making nothing.
awwwwwwwww sh!t.

[HoneyBadger]

Lasagna time!!!!!!!!!!!!!!!!!!!!!!!!!!!

[mcjhr]

Lasagna time!!!!!!!!!!!!!!!!!!!!!!!!!!!

Pics or it didn't happen.

[BuffCyclist]

and I scared everyone off by talking about the NFA...

Sorry, wife got home and I had to act like I was doing homework for a bit [LOL]

[buffalobo]

Sorry, wife got home and I had to act like I was doing homework for a bit [LOL]

Only married a few months and shining on the wife. :what:

:D:D:D

Sent from my electronic ball and chain.

[BuffCyclist]

HB, I had no idea the KX3 had a baffle. I've never seen one and always thought it was hollow, just a shell.

[BuffCyclist]

And HAHA buffalobo, but I was actually working on homework all along, just posting in between.

[HoneyBadger]

HB, I had no idea the KX3 had a baffle. I've never seen one and always thought it was hollow, just a shell.
Yep, I took mine apart as soon as I got it... Because that's what I do. I don't know what the baffle does exactly, but it sure does work really well to kick all the blast out away from the user

[OtterbatHellcat]

Greetings, fellow Whorians.

Welcome home, Bogie.

[buffalobo]

And HAHA buffalobo, but I was actually working on homework all along, just posting in between.

Then it was multi-tasking, no need for pretend.

<poke>

Sent from my electronic ball and chain.

[OtterbatHellcat]

Had a good lesson, Vincent is a pretty cool dude.

Trying to get some box scale patterns down solid, and keeping them straight between maj and min. 3 of 'em anyways, so think 6 patterns technically.

[OtterbatHellcat]

Heya Lobo.

[OtterbatHellcat]

It's almost 8:00 already.

Ya know, this whole job/work thing pisses me off. If I had unlimited consecutive days to do whatever the hell I wanted, I could dig that. But then some asshole invented the bill, in order to pay off some shit called debt. I think both of those assholes should go down in history as complete douchebags.

[bogie]

http://img.tapatalk.com/d/14/01/29/3esuqynu.jpg

[OtterbatHellcat]

Heya, Bogie.

Nice pic.

[bogie]

Hey obc. How are things shaping up at gome?

[bogie]

Hey obc. How are things shaping up at gome?

*home

[TheBelly]

Just got an ultra sonic cleaner. We'll see how this works out. Maybe I should just end up wet tumbling.

[OtterbatHellcat]

Yo Belly, I'll be curious as to your findings with the new cleaner.

[OtterbatHellcat]

Hey obc. How are things shaping up at gome?

Still an ongoing situation, ups and less than ups. Starting to have a "less than up" this evening, but we'll see.

Good to see ya back.

[TheBelly]

It's going to be interesting getting all this figured out....... Hmm.....

[buffalobo]

Heya Lobo.

How you be brother?

I been getting beat up by head cold. Got too wore down from long hours and it snuck up and sucker punched me.

Sent from my electronic ball and chain.

[OtterbatHellcat]

Fech, I need to blaze.

Later bro's.

[mcjhr]

Later hoss

[HoneyBadger]

Still an ongoing situation, ups and less than ups. Starting to have a "less than up" this evening, but we'll see.

Good to see ya back.
Whatever you do, don't turn on your TV!

[buffalobo]

Best episode of "Bread and Circuses" I have ever seen. :mad::banghead:

Sent from my electronic ball and chain.

[HoneyBadger]

Best? Or worst?







ETA: [Puke]

[TheBelly]

Had a good lesson, Vincent is a pretty cool dude.

Trying to get some box scale patterns down solid, and keeping them straight between maj and min. 3 of 'em anyways, so think 6 patterns technically.

Regardless of the scale, there are only a couple different finger patterns that are required. This is true regardless of the string instrument.

[HoneyBadger]

HB Jr is finally in bed. What's up fellers?

[buffalobo]

Best, the sheep will eat it up. Fattening them up for the slaughter.

Sent from my electronic ball and chain.

[HoneyBadger]

Best, the sheep will eat it up. Fattening them up for the slaughter.

Sent from my electronic ball and chain.
Not sure what to make of this. Have you heard the people singing the songs of angry men?

[TheBelly]

Please allow me to sing you the song of my people!!

[HoneyBadger]

Please allow me to sing you the song of my people!!
I'm all ears! [Coffee]

[ChunkyMonkey]

I'm all ears! [Coffee]

Wanna borrow my Peltor?

[crays]

Please allow me to sing you the song of my people!!
I'm all ears! [Coffee]

Would that be...PEW PEW PEW PEW...'MURICA!!

Sent via my Mobile Work Avoidance Device

[ChunkyMonkey]

Would that be...PEW PEW PEW PEW...'MURICA!!

Sent via my Mobile Work Avoidance Device


Click and guess who that is....
40041

[islandermyk]

[ROFL2] Ah sh*t...

[ChunkyMonkey]

[ROFL2] Ah sh*t...

man you are everywhere!

[islandermyk]

A whore is a whore... will get around one way or the other [ROFL3]

[Mazin]

A whore is a whore... will get around one way or the other [ROFL3]


Spoke with true wisdom! ( as I walk down the cold hard pavement that is hofax)

[TheBelly]

Yeah, no dice on the ultra sonic cleaner. Wet tumbling is the way to go. Clean AND shiny.....

[Mazin]

It's called the ho-stro

[TheBelly]

I'm all ears! [Coffee]


http://youtu.be/e9VZuL48KGs

[HoneyBadger]

[ROFL2] Ah sh*t...
I may have an old embarrassing pic of you on my desktop somewhere... It might show up here soon.

[HoneyBadger]

Spoke with true wisdom! ( as I walk down the cold hard pavement that is hofax)
Hi Bob Dole!

[HoneyBadger]

http://youtu.be/e9VZuL48KGs
All right!