The post whore thread.

[Great-Kazoo]

Would you trade a car for an equivalent amount of fuel?

Only if it was alcohol free and storage was not an issue. I'd also drain the tank or run it close to on E before doing a trade.

[wyome]

Got the plans for our backyard deck today... nice... now I need to sell a kidney to pay for it...

[Mazin]

-“You know how these work, right?” said my wife, looking at a couple empty ice cube trays sitting on the counter.

-“Those are automatic, and seem to just take care of themselves”, I replied.

Fast-forward a week: we’re out of ice in the freezer, and the trays sit empty on the counter. Clearly they must be broken, so I wrote “ice cube trays” on the grocery list.

I’m curious to see if I wake up in the morning.

[ROFL1]

[ChickNorris]

[ROFL1]

Yes indeed

[Great-Kazoo]

-“You know how these work, right?” said my wife, looking at a couple empty ice cube trays sitting on the counter.

-“Those are automatic, and seem to just take care of themselves”, I replied.

Fast-forward a week: we’re out of ice in the freezer, and the trays sit empty on the counter. Clearly they must be broken, so I wrote “ice cube trays” on the grocery list.

I’m curious to see if I wake up in the morning.

The spouse told me she wanted a new dishwasher for her b-day. Never understood why she got mad when i showed her the dishwasher.



So what if she didn't speak english.



No good deed goes unpunished.

[OtterbatHellcat]

I've stopped asking to go shooting with you nancys. Each of you always has an excuse.

[mlp]

Oh, it's probably just nobody knows how you'd do in a quick bank robbery, or police shoot out, random kidnapping, etc. I wouldn't take it personal.

[Irving]

If Chick.N doesn't get invited to a range session, or misses out on one more item in the Trading Post, she's going to lose it!

[OtterbatHellcat]

Well, I guess I'm a chump then...

Yeah, I as well fall into that category.

[CS1983]

I wish there was a brass magnet.

My fishing magnet is working great for steel case stuff, though.

[OtterbatHellcat]

I’m curious to see if I wake up in the morning.

That...was funny shit, Fentonite.

[OtterbatHellcat]

Howdy Irving and Cav, and everyone.

[CS1983]

Howdy sir.

[wyome]

Howdy OBC

[OtterbatHellcat]

Hey, hey hey.

We made it through second Tuesday, hump day IS Friday...…...that's a win right there.

[OtterbatHellcat]

Hope everyone has a good day tomorrow, and enjoying this high temperature January weekend we is a gonna be a having.

I wonder though if this is the teaser before the stock show plunge. I hope not. G'nite fellers...peace.

[wyome]

Anyone doing the Sportsman's Expo 10-13 jan?

[brutal]

You should fill them with Malox.

or Neosporin

[brutal]

If Chick.N doesn't get invited to a range session, or misses out on one more item in the Trading Post, she's going to lose it!

I see what you did there. Even if you didn't.

[Fentonite]

or Neosporin
Yeah - impregnated with epinephrine to help slow the bleeding.


I see what you did there. Even if you didn't.
I saw what I think you saw too, but only after I said it phonetically. For some reason, I doubt it’s fitting, but I still chuckled.

[Irving]

or Neosporin

That was in reference to his wife handing him a bottle of Malox in the middle of the night that he then poured all over himself in his bed.


I see what you did there. Even if you didn't.

Of course I did!

[Grant H.]

That doesn't look like solar stuff.

They have solar on them now.

Those have 40' of tower, 385W of solar, and hundreds of Mbps worth of Microwave radios on the...

[Grant H.]

Of course I did!

I chuckled.

[MrPrena]

Not good. Need a Throttle Actuator on Bank 1.
Gonna cost lots of money and lots of time. :(

Code 2B15 an 2B57
https://i.imgur.com/HUH2fgS.jpg

[Irving]

Not good. Need a Throttle Actuator on Bank 1.
Gonna cost lots of money and lots of time. :(

Code 2B15 an 2B57
https://i.imgur.com/HUH2fgS.jpg

I feel like there are better imports you could own. Your posts alone have talked me out of ever owning a BMW.

[MrPrena]

I feel like there are better imports you could own. Your posts alone have talked me out of ever owning a BMW.

Regular BMW is easier (and less $) to work on. Just don't get M3/4/5/6, unless you are master DIY. On top of that, the Firearm $$ will be allocated to car maintenance cost.

If you google "Code 2B15 and 2B57" you will get m3post DIY page on top(which i am very active on). Most common issues with the N/A M V8 S65 engines.


https://www.m3post.com/forums/showthread.php?t=1553954
https://www.google.com/search?q=Code+2B15+an+2B57&oq=Code+2B15+an+2B57&aqs=chrome..69i57.693j0j7&sourceid=chrome&ie=UTF-8

Wait till you hear how much it cost to replace carbon Ceramic Brake pad/rotor on Nissan GTR and BMW M3/4.
[LOL]

[ChickNorris]

Good morning folks

[ChickNorris]

I didn't join for the trading post so it's kismet.

[Great-Kazoo]

Sun's coming up, i'm looking down and not up at the ground. It is a good morn'n

[ChickNorris]

In retrospect the TP wanted section has been good to me. Maybe I'll go that route for my wish list...

[Irving]

In retrospect the TP wanted section has been good to me. Maybe I'll go that route for my wish list...

I knew it! She's just been after all the things everyone wants to be rid of all along. Engaging in legal commerce is the lowest of low crimes. Shame Madame, SHAME!

[ChickNorris]

You're silly. : D

[SideShow Bob]

I knew it! She's just been after all the things everyone wants to be rid of all along. Engaging in legal commerce is the lowest of low crimes. Shame Madame, SHAME!

It is also a sin, “Thou shall not covet thy neighbors pocessions including his ass.”

[ChickNorris]

Greedy & covetous cookie giving, alley plowing, house sitting, I'm going to the store can I pick up anything for you neighbor.... heretic. Yep.

[Great-Kazoo]

Nothing like finding things you were looking at buying for home improvements. Listed in the Free section of CL and the one listing it actually returns your inquiry.

[ChickNorris]

I used to give away building materials on CL all the time. Reminds me I've got 1/2 roll of blue pex that needs to go...

[Irving]

What diameter is the blue pex? If I can use that as extra, just in case, material for that travel trailer, I'll come take it off your hands.

[ChickNorris]

It is also a sin, “Thou shall not covet thy neighbors pocessions including his ass.”

You edited your post after my reply... changed the context. See how you are.

[ChickNorris]

What diameter is the blue pex? If I can use that as extra, just in case, material for that travel trailer, I'll come take it off your hands.

Viola

[Irving]

Are you selling it or giving it away? When and where can I come get that?

[Great-Kazoo]

Are you selling it or giving it away? When and where can I come get that?

Hard to send a pm? Oh yeah i forgot, you need to pass kazoo's count.

[Great-Kazoo]

I'll wait till you get within 500, then roger ramjet your numbers

[Great-Kazoo]

Or maybe 450, who knows?

[brutal]

Are you selling it or giving it away? When and where can I come get that?

Split it with you if needed...

P.S. FYI, lots of RV's are using blue tubing that just LOOKS like PEX.

[brutal]

Hard to send a pm? Oh yeah i forgot, you need to pass kazoo's count.

He's hot on your heels.

[davsel]

Proverbs 17:27 (NKJV)

He who has knowledge spares his words,
And a man of understanding is of a calm spirit.

[Irving]

Just think of all the things I don't talk about on here. A real wealth of knowledge.

[OtterbatHellcat]

Finding someone in Denver who can bend larger diameter tubing is kinda futile. Going interstate now, thanks,.....found an outfit in Illinois might be the one to get it done, but that isn't a YES yet... wtf is the problem? I see bike racks bolted to the sidewalk that look pretty damn near what I want done. Again, wtf?

I can't even get some of the bigger companies here to even call me back, because they apparently don't answer their phones or return messages.

[OtterbatHellcat]

I should start searching bike "racks bolted to the sidewalk" companies, and just modify it. Grrrrr.

I can still use the tube I bought for something productive. Homemade cannon barrels or something cool like that.

[Irving]

Is this something that is too thick to just buy a pipe bender from Home Depot or something?

[OtterbatHellcat]

Is this something that is too thick to just buy a pipe bender from Home Depot or something?

Yeah, even at 1/8 wall the radius for a 90 would take four feet of linear distance with places here in town. Tight 90 needs heat induction or hacking multiple 45's still using heat. Nobody it seems here, has any dies for 3.5 O.D. that can do a tighter 90. The Chicago outfit, who answers their phone and wants business, said they thought they could bend that schedule 40 tight and wanted drawings. So, somebody out of state wants to help bend tight 1/4 wall at 3.5 O.D. and "is trying" ...nobody here can do either apparently.

There's zero chance for me to try and use what I bought to make something that doesn't look like shit when it's finished. Shitty part is I told the guy at the tube store that it's no good buying it if nobody in town could bend it, and he said....this place "x" can....so I bought the material. It's a fuck show all around.

I will find somebody that can do what I want, but because I don't want crap, I will pay the price and it's gonna take a lot longer to get it. I know when it's finished, it will have been done the right way.

[OtterbatHellcat]

...and then get them powder coated after I put it together.

[Irving]

What is the tube for again? How much of the bent part will be visible? I'm surprised the muffler shops balked on you seeing as how mandrel bends seems to be part of their business.

[OtterbatHellcat]

What is the tube for again? How much of the bent part will be visible? I'm surprised the muffler shops balked on you seeing as how mandrel bends seems to be part of their business.

The term sucks, but Nerfbars. All of the bent areas will be visible. Exhaust tubing is weak.

[brutal]

Yeah, even at 1/8 wall the radius for a 90 would take four feet of linear distance with places here in town. Tight 90 needs heat induction or hacking multiple 45's still using heat. Nobody it seems here, has any dies for 3.5 O.D. that can do a tighter 90. The Chicago outfit, who answers their phone and wants business, said they thought they could bend that schedule 40 tight and wanted drawings. So, somebody out of state wants to help bend tight 1/4 wall at 3.5 O.D. and "is trying" ...nobody here can do either apparently.

There's zero chance for me to try and use what I bought to make something that doesn't look like shit when it's finished. Shitty part is I told the guy at the tube store that it's no good buying it if nobody in town could bend it, and he said....this place "x" can....so I bought the material. It's a fuck show all around.

I will find somebody that can do what I want, but because I don't want crap, I will pay the price and it's gonna take a lot longer to get it. I know when it's finished, it will have been done the right way.

There's a local tool bending machine parts maker (a client of mine) that might actually be able to do it, I could call them and inquire if you like? I have a super relationship with the owner. He's a "good guy" too. They may only do smaller stuff, but it's worth a call. He may also know who could possibly do it if they don't.

[brutal]

I should start searching bike "racks bolted to the sidewalk" companies, and just modify it. Grrrrr.

I can still use the tube I bought for something productive. Homemade cannon barrels or something cool like that.

Own a sawzall? Sounds like you already know where to get the pre-bent pipe.

[Coffee]

[BladesNBarrels]

Own a sawzall? Sounds like you already know where to get the pre-bent pipe.

[Coffee]

Runnin' with the Devil!

[Irving]

Ahh okay, for some reason I thought you were still messing with a shifter or running some type of non structural conduit or something. 4x4 shops that custom make sliders aren't interested in helping you?

[Great-Kazoo]

He's hot on your heels.

Those are orthotic lifts, not heels !

[Mazin]

OBC have you hit up Timelement? Dude is a great guy and most likely to be able to help you because the custom car thing is that guys life.

[Great-Kazoo]

Proverbs 17:27 (NKJV)

He who has knowledge spares his words,
And a man of understanding is of a calm spirit.



G/K 24:7

He who sleeps little, rambles on.

[ChickNorris]

It's Friday night & I'm bored. This isn't right.

[ChickNorris]

G/K 24:7

He who sleeps little, rambles on.

F*ck that's funny.

[Great-Kazoo]

Yeah, even at 1/8 wall the radius for a 90 would take four feet of linear distance with places here in town. Tight 90 needs heat induction or hacking multiple 45's still using heat. Nobody it seems here, has any dies for 3.5 O.D. that can do a tighter 90. The Chicago outfit, who answers their phone and wants business, said they thought they could bend that schedule 40 tight and wanted drawings. So, somebody out of state wants to help bend tight 1/4 wall at 3.5 O.D. and "is trying" ...nobody here can do either apparently.

There's zero chance for me to try and use what I bought to make something that doesn't look like shit when it's finished. Shitty part is I told the guy at the tube store that it's no good buying it if nobody in town could bend it, and he said....this place "x" can....so I bought the material. It's a fuck show all around.

I will find somebody that can do what I want, but because I don't want crap, I will pay the price and it's gonna take a lot longer to get it. I know when it's finished, it will have been done the right way.



https://prescott.craigslist.org/tls/d/chino-valley-oxy-acet-torch-set-up/6784359647.html

https://phoenix.craigslist.org/wvl/tls/d/palo-verde-pro-tools-105-tubing-bender/6756646032.html

[Great-Kazoo]

F*ck that's funny.

Funny, Like a Clown Funny?

[Great-Kazoo]

Just think of all the things I don't talk about on here. A real wealth of knowledge.

Run, Forrest, Run !

[brutal]

Just think of all the things I don't talk about on here. A real wealth of knowledge.

We don't need to hear what all the other people in your head are saying.

[Great-Kazoo]

We don't need to hear what all the other people in your head are saying.

Don't encourage them.

[ChickNorris]

Bored

[wyome]

What did I miss today?

[ChickNorris]

What did I miss today?

Pet squirrels & hunting foul.


Oh, today...

[OtterbatHellcat]

There's a local tool bending machine parts maker (a client of mine) that might actually be able to do it, I could call them and inquire if you like? I have a super relationship with the owner. He's a "good guy" too. They may only do smaller stuff, but it's worth a call. He may also know who could possibly do it if they don't.

Yeah, Brutal. Actually I am interested.

I've been looking for over a month trying to find someone who can do what I want. Tonight I've been sitting here thinking about all the ways I can use the material I bought for it's original purpose and not have it look retarded when it was done. I made some progress and came up with some decent ideas actually, however none of it really comes close to the cleaner look of the "U" shaped traditional nerf bar with about a 23 degree angle 1 foot in from perimeter to get centered to frame plate. Except 1 *maybe*...and that would still be really labor intensive for a guy with limited quality equipment and ability to duplicate the same cuts with precision multiple times.

None of the garbage aftermarket products I've been able to find are acceptable.

[OtterbatHellcat]

Chick...you ever bend pipe?

[Great-Kazoo]

Chick...you ever bend pipe?

[ROFL3]

[ChickNorris]

Conduit surely & Ive got an old timey floor mount ornamental bender with many different die sets including tube, but nothing that diameter.

[OtterbatHellcat]

It would be cool if there was some posting application where I could draw what I envision, and posting pics blows ass.

[ChickNorris]

I'm ignoring that Kazoo.

[OtterbatHellcat]

Conduit surely & Ive got an old timey floor mount ornamental bender with many different die sets including tube, but nothing that diameter.

I do...you busy tomorrow?

[ChickNorris]

Ok. Davies?

[Great-Kazoo]

Conduit surely & Ive got an old timey floor mount ornamental bender with many different die sets including tube, but nothing that diameter.

If you cut some pipe with an I.D of the needed O.D. Using a 12 - 20T press could possibly get the bends one needs. You're going to need some torches also.

[OtterbatHellcat]

I'll be diligently wiring tomorrow, and probably moving the headliner back 1/4 inch. There are two spots rearward where the headliner has relief for screw holes that are slightly visible with the molding in place, and I don't like it.

Hell or high water though, I need to get this nerf bar thing satisfactory one damn way or another...and have it be strong and not look like shit. Besides, someday you're gonna tell someone you know who sees that truck...."I know that guy, he's an asshole, but he sure did an awesome job building that truck, it's beautiful".

:)

[Great-Kazoo]

Anyone play that Words with Friends game?

[OtterbatHellcat]

You have friends?

[Great-Kazoo]

You have friends?

For as many times i gave them the last 4 of a CC. They should be, by now.

[OtterbatHellcat]

Well, I meant besides me... you know I love you...in that one way.

[Great-Kazoo]

Well, I meant besides me... you know I love you...in that one way.

Yes you do. But i'm tired and have a headache.

[CS1983]

I used to play, but I don't much anymore. I might have deleted it from my phone.

[Great-Kazoo]

I used to play, but I don't much anymore. I might have deleted it from my phone.

It makes me think a lot. But fortunately nothing more than 7 letters at a time ;)

[OtterbatHellcat]

I wrote seven letters to a congressman, didn't get me anywhere besides disappointment.

[Mazin]

Well, I meant besides me... you know I love you...in that one way.


Yes you do. But i'm tired and have a headache.

[fagpole]

[OtterbatHellcat]

He has feelings too.

[Great-Kazoo]

[fagpole]

Says the "guy" who asked me if i could trim my nails a little shorter.


AHHHH Mazinnnnnnnnnn

[OtterbatHellcat]

Girlfriend movie hell here...…"till death do us part". Not only do I hate Merrill Streep, I always hated this movie.

I'm...….….a nice guy.

[OtterbatHellcat]

Says the "guy" who asked me if i could trim my nails a little shorter.


AHHHH Mazinnnnnnnnnn

lmao.

[Great-Kazoo]

Girlfriend movie hell here...…"till death do us part". Not only do I hate Merrill Streep, I always hated this movie.

I'm...….….a nice guy.

[OtterbatHellcat]

I'd rather be a wise guy, at least I'd be connected and benefiting from my hard work, and paid handsomely as well.

[OtterbatHellcat]

I know how to keep a boss happy, and if someone needed whacked, phone call.

That would be super cool....come on...you all know it would.

[OtterbatHellcat]

On topic...anyone else have a thing for Fran Drescher?

Marissa Tomei in "my cousin vinney" was super hot.

[Great-Kazoo]

On topic...anyone else have a thing for Fran Drescher?

Marissa Tomei in "my cousin vinney" was super hot.

makes no difference to me. I'm a realist













First I Look at the Purse.

[OtterbatHellcat]

Real right now, is I got Live PD on......that crap show is over. Woo Hoo.

[OtterbatHellcat]

First show I remember seeing Drescher in was Hollywood Knights.

We're all old now though.

[Fentonite]

Proverbs 17:27 (NKJV)

He who has knowledge spares his words,
And a man of understanding is of a calm spirit.

I like that. Very reminiscent of one of my favorite Lincoln quotes.

[OtterbatHellcat]

The dirtbag living in a camper in the rear part of the commercial lot next door....lost his backyard domicile in a blaze of flames and small explosions tonight.

[Fentonite]

Meth mishap?

[Fentonite]

I am absolutely, profoundly whooped. Busier day than I can remember in quite a while, but some really good cases. Practicing in an ER is often mostly frustrating and without much meaning, but that’s balanced by the occasional chance for big wins (and big losses). Today was a good day, one where I feel satisfied in being tired, sore and completely spent. I needed that. <end catharsis>

[OtterbatHellcat]

I like that. Very reminiscent of one of my favorite Lincoln quotes.

Yes, it was a good quote.

I understand that it's better to not speak and be thought a fool, rather than to speak and remove all doubt. But then we wouldn't have religion, politicians, or philosophers.

And then think of all the times some folks thought you were being a fool during your life, they might have even mentioned that to you at the time even....and you did what ya did anyways. Much more could be discussed about words, knowledge, understanding and spirit.

[OtterbatHellcat]

Meth mishap?

I don't think so. More likely a heater or electrical accident I figure.

[OtterbatHellcat]

I am absolutely, profoundly whooped. Busier day than I can remember in quite a while, but some really good cases. Practicing in an ER is often mostly frustrating and without much meaning, but that’s balanced by the occasional chance for big wins (and big losses). Today was a good day, one where I feel satisfied in being tired, sore and completely spent. I needed that. <end catharsis>

Bless ya man! You're doing some tough work that carries some high intensity outcomes...whether good or bad. I'm glad to hear that today was a good one for you.

[Fentonite]

Yes, it was a good quote.

I understand that it's better to not speak and be thought a fool, rather than to speak and remove all doubt. But then we wouldn't have religion, politicians, or philosophers.

And then think of all the times some folks thought you were being a fool during your life, they might have even mentioned that to you at the time even....and you did what ya did anyways. Much more could be discussed about words, knowledge, understanding and spirit.

Ah, you know more about me than I expected, for yes, there have been many of those times. I like the quote, not because I live by it, but because I often (in hindsight) wish I had.

[Fentonite]

Thanks man.

[Fentonite]

And, I’m out. Night y’all.

[OtterbatHellcat]

Ah, you know more about me than I expected, for yes, there have been many of those times. I like the quote, not because I live by it, but because I often (in hindsight) wish I had.

We're paddling in the same river brother, and most of the time I feel like I'm using a chop stick.

Goodnight my friend.

[OtterbatHellcat]

We need better equipment...dammit.

[OtterbatHellcat]

Just a thought, Chick, but how about Poser Whore Thread?

[OtterbatHellcat]

Zork.

[Great-Kazoo]

Zork.

You mean zerk ?

Gonna pass on the vehicles. Shop , misc racks, lighting and power to it are priority #1

[OtterbatHellcat]

Poit?

It's fun whichever way.


What'chu talkin bout, Willis? Delays in completion is your message?

[OtterbatHellcat]

I'm not gonna win the damn lottery, so I probably need to rob a bank, and then get my garage going.

By the time I get out of prison, the contractor might have it finished.

[Great-Kazoo]

I'm not gonna win the damn lottery, so I probably need to rob a bank, and then get my garage going.

By the time I get out of prison, the contractor might have it finished.

Hopefully at least the rock work.

Outta here, a long day brings shorter sleep in nights.

[Irving]

OBC, do you know what the "poit" reference is to?

I second the Tinelement suggestion and feel like a dummy for not thinking of it myself.

I assumed that Davsel's post was a dig at Kazoo referencing post count, but maybe I'm being presumptuous. Davsel generally avoids being directly confrontational so he could just be using the PWT the same way the rest of us do to post rando stuff.

[OtterbatHellcat]

He said 73K.

I thought......you suck. He probably thought I suck (can't afford). Then I found that I do suck because I don't want to compromise. He still sucks just because. 73K sucks, but it's my last garage because I'll die there...I already had one once *mother fucker* and lost it in divorce. So, you suck no matter what, just build the damn building.

Man Garageology thought process explained.

[OtterbatHellcat]

OBC, do you know what the "poit" reference is to?

Piss on it, I believe.

[OtterbatHellcat]

Outta here, a long day brings shorter sleep in nights.

I can't bail yet, brain of mush with all the shit going on....goodnight, Sir.

[Mazin]

Ahh you know I didn't grow up redneck but theres a certain satisfaction of having a shotgun and ammo....brings a smile to my face.

[OtterbatHellcat]

Ahh you know I didn't grow up redneck but theres a certain satisfaction of having a shotgun and ammo....brings a smile to my face.

Damn straight.

[OtterbatHellcat]

Well, for growing up in Colorado, I did grow up redneck so to speak. Everyone has family problems...don't they?

lol

[OtterbatHellcat]

Hubba, hubba, hubba.

[OtterbatHellcat]

https://youtu.be/LEZtII8rt_Y

[wyome]

https://youtu.be/LEZtII8rt_Y

WTFO

[wyome]

How do you find poop like this?
Are you related to someone in the band, or were you the bass player in an earlier life

[OtterbatHellcat]

How do you find poop like this?
Are you related to someone in the band, or were you the bass player in an earlier life

Kazoo. [Dunno]

[wyome]

When in doubt blame GK?

Sounds good to me

[OtterbatHellcat]

Good to see ya buddy, truth is I thought this was funny as hell the first time I saw it.
Still is to me.

[OtterbatHellcat]

How you be?

[wyome]

I be sleepy....

Too bad that train in the vid wasn't a lot faster

[OtterbatHellcat]

Gettin' tired myself, but this old disturbed ass sum' bitch aint ready to hit the hay yet.

[wyome]

U should fire up the Night shift thread....

[OtterbatHellcat]

The shit I want to draw out and plan now with an alternate idea is mixing with what should be done already, and it pisses me off I'm even thinking about it.

These are also words that are coming from a frustrated individual....for several different reasons.

[brutal]

Yeah, Brutal. Actually I am interested.

I've been looking for over a month trying to find someone who can do what I want. Tonight I've been sitting here thinking about all the ways I can use the material I bought for it's original purpose and not have it look retarded when it was done. I made some progress and came up with some decent ideas actually, however none of it really comes close to the cleaner look of the "U" shaped traditional nerf bar with about a 23 degree angle 1 foot in from perimeter to get centered to frame plate. Except 1 *maybe*...and that would still be really labor intensive for a guy with limited quality equipment and ability to duplicate the same cuts with precision multiple times.

None of the garbage aftermarket products I've been able to find are acceptable.

I'll call you tomorrow.

[OtterbatHellcat]

I should be saying goodnight, and I will now.

Goodnight folks, weekends are neato.

[OtterbatHellcat]

I'll call you tomorrow.

Cool, Sir...thank you.

Goodnight.

[Irving]

OBC, do you know what the "poit" reference is to?

Piss on it, I believe.

It was from the show Animaniacs in the 90's. There was a subcartoon with characters Pinky and The Brain in some episodes.
This isn't the best example because it's some musical number, but it shows Pinky saying both "Poit" and "Narf."

https://www.youtube.com/watch?v=Y-Q-aeF5UPk

[ChickNorris]

Poit

[ChickNorris]

Good morning folks, Irving.

[ChickNorris]

Pex for everyone!

Ok, just Irving & maybe Brutal if you boys can share.

[ChickNorris]

Im going outside to play with some cool kids...

[Great-Kazoo]

When in doubt blame GK?

Sounds good to me

I take full responsibility. Country Dick Montana and the Beet Farmers. Among other 80's quirky bands.

https://www.youtube.com/watch?v=byDiILrNbM4

[Great-Kazoo]

Good morning folks, Irving.

Morning from da valley

http://i65.tinypic.com/2qnqfsp.jpg

[Great-Kazoo]

When in doubt blame GK?

Sounds good to me

one more
She's an AIRHEAD. everyone says she's a dumb blonde. But i know she dyes her hair ;)



https://www.youtube.com/watch?v=RDCxwP3V10I

[Great-Kazoo]

It was from the show Animaniacs in the 90's. There was a subcartoon with characters Pinky and The Brain in some episodes.
This isn't the best example because it's some musical number, but it shows Pinky saying both "Poit" and "Narf."

https://www.youtube.com/watch?v=Y-Q-aeF5UPk

P&TB.. My nephews watched that as a kid.

[ChickNorris]

I still watch it, obviously.

[ChickNorris]

Because sometimes being 12 is better.

8 is good too.

[ChickNorris]

I see you reindeer & sled giver.

Bet you're just reading & reading & scrolling & reading some more.

I heard you chuckle too.

[ChickNorris]

You'll get here & be like.... whoa! Wait.... does she mean little ole me?!?

[ChickNorris]

Yes you.

[ChickNorris]

: )

[ChickNorris]

(& whomever isnt showing up on the list... i can hear you breathing perv)

[ChickNorris]

I see you too Wyome! : )

[wyome]

Asthma making me breathe hard today...not stalking I swear

[ChickNorris]

Riiiiight

[wyome]

Air...itz good for me

[ChickNorris]

* Censoring myself here because its lude & would infact instigate stalking somewhere *

[ChickNorris]

I like air too. Understood.

[wyome]

How are u this mornjng?

[BladesNBarrels]

https://youtu.be/LEZtII8rt_Y

Does anyone remember the old "Hal and Charlie" morning drive show in the 80's? They played that song every once in a while.
Another was something along the lines "You are a Fluke of the Universe" closest I could find was a more recent recording


https://www.youtube.com/watch?v=faU-SK0pHCI

[BladesNBarrels]

I see you reindeer & sled giver.

Bet you're just reading & reading & scrolling & reading some more.

I heard you chuckle too.

Got me!
Remember, you are being tracked everywhere!

[ChickNorris]

How are u this mornjng?

Seems I'm in the mood to be social & silly.

& you Sir?

[wyome]

BnB... i'm gonna say no on that show...but I've only been in the area since 05

[wyome]

I'm good Chick....gotta get ready for work here in a bit

[ChickNorris]

What has you working on Saturdays?

[ChickNorris]

I see you too Kowalski.

When are we going to breakfast?

[wyome]

Just my turn in the chair....we support some off hours stuff

[ChickNorris]

Because you're there to help. ; )

[wyome]

And collect a paycheck

[ChickNorris]

The check is in the mail...

[ChickNorris]

& of course I'll still respect you...

3 truths. Ba dum tss

[OtterbatHellcat]

Good morning.

You're not going to come, where?

[OtterbatHellcat]

Wyome….you see what I mean now?

That detachable song was actually kinda funny, and not horrible to listen to.

[Great-Kazoo]

& of course I'll still respect you...

3 truths. Ba dum tss

I asked a woman if she'd still respect me in the morning. MORNING? I thought you left already.

[OtterbatHellcat]

It was like a Costner dialogue "Dances with wolves" style ahead of it's time.

Btw, I think Blondie made the first actual rap song.

[OtterbatHellcat]

https://youtu.be/pHCdS7O248g

[ChickNorris]

Fine. Im not going to ask any of you nancys out to breakfast anymore either.

[OtterbatHellcat]

I'm going to work too.

Wiring...grrrr.

[ChickNorris]

You gentlemen, are all hat & no cattle.

Except Hurley, maybe.

[ChickNorris]

& Kazoo is exempt because he's got an Arizona placard, maybe.

[ChickNorris]

& also because he can only count to 16 before he's got to start over.

Maybe.

[ChickNorris]

I see you Grant H. : )

[buffalobo]

OBC, consider using pipe and weld fittings. Fabricate what you want, grind smooth and have powder coat done.

Also research pipeline fabrication companies. We used to have bending shoes mounted on our larger side booms for making bends on the right of way. Could bend from 2" schedule 40 to 8" lite wall.

[wyome]

Santiago's burritos with my sweetie... gonna be a good day

[ChickNorris]

Santiago's burritos with my sweetie... gonna be a good day

Did the same. Agreed.

[ChickNorris]

OBC, consider using pipe and weld fittings. Fabricate what you want, grind smooth and have powder coat done.

I was wanting to suggest this but figured he had his reasons.

[ChickNorris]

Hiya BuffaloBo!

[ChickNorris]

Toodles...

[Irving]

Hello.

[ChickNorris]

Hi Irving!

[ChickNorris]

Hi Brutal!

[brutal]

Stalker

[ChickNorris]

Since when has reading the thread list of attendees become stalking? : P

[ChickNorris]

Ive mentioned from day 2 that we need a bell on Mazin for that very reason.

[ChickNorris]

& apparently Irving needs a bell now too.

[ChickNorris]

I put pex out as bait...

[brutal]

Btw, I think Blondie made the first actual rap song.

Unlikely.

Hip hop was born in the early 70's.

Not that I'm a fan of modern rap, but early and classic hip hop is tolerable.

[ChickNorris]

Giggle snort

[buffalobo]

Santiago's burritos with my sweetie... gonna be a good dayGomez burritos provided during mandatory training for new ERP. Better than Santiagos but not as good as Burrito Co.

[Mazin]

Anyone up north feel like a round of trap?
Headed to CO Clays now and figured I'd hit up the ho's

[ChickNorris]

Tease

[Mazin]

Aaaaand 50rnds later 2 things I failed to remember shooting Clay's;
1. I need to work on my upper body so I dont have as much fat where the shogun goes (yea sweet looking bruise)
2. Evidently I need to learn how to shoot a shotty because I couldn't hit shit.
I did however book through 50 rounds quicker than anyone there and they were packed. [Coffee]

[MrPrena]

Today was a warm day to wash my vehicles.

[buffalobo]

Aaaaand 50rnds later 2 things I failed to remember shooting Clay's;
1. I need to work on my upper body so I dont have as much fat where the shogun goes (yea sweet looking bruise)
2. Evidently I need to learn how to shoot a shotty because I couldn't hit shit.
I did however book through 50 rounds quicker than anyone there and they were packed. [Coffee]I can shoot game birds but not those damn flying clay discs.

[Mazin]

Use to be able to go 23/25 easy on trap and sporting Clay's I was competitive but evidently not shooting a 12 ga for a few years deteriarated any skills I had. Next stop I guess is the pay and slay place.

[ChickNorris]

I've never fired a shotgun, in any configuration at anything.

[brutal]

My SBE-II is a dream to shoot. Unless I pull off a quick shot and don't have it in the pocket, it's a softie with the inertia drive and the comfortech (buffered/cushioned) stock.

[Mazin]

Always wanted to do a SBS with a siaga 12 and 410(for the wife). It's still on my want list along with about 12 others lol

[OtterbatHellcat]

OBC, consider using pipe and weld fittings. Fabricate what you want, grind smooth and have powder coat done.

Also research pipeline fabrication companies. We used to have bending shoes mounted on our larger side booms for making bends on the right of way. Could bend from 2" schedule 40 to 8" lite wall.

A few things are in motion at this time. The outfit in Chicago is one of those places. I know you know that every cut, weld, and grind can make things look good. It also loses a good part of its overall strength with each modification made. If nobody can help get what I want done, I'll do what I can with the material I already bought in that fashion.

If I can get hooked up with the right outfit to either use my material, or what they provide, to get the bar bent up and in one piece....I will have them do it. I spent some more time today refining what I'm looking for and made some first rough drafts of the new change, and I'll draw that stuff up better tomorrow. I'm looking for maximum strength and integrity with each portion of this build.

Many people of sensible and reasonable thought, could easily criticize much of the overkill and over the top efforts that I am choosing to do. And that's okay, because I will know that I never made a short cut, or compromised for either money or time or both. There is no question that having these bars bent to spec to match the frame and do the other shit that is going to happen to them with the shields....is the type of stuff that really could get this thing in print someday....and that would be cool. If it never does, that's cool too.

[Great-Kazoo]

had a coyote run in front of me today. Fuker was as big as a german shepard, if not bigger. Took the 2 lane road in 1 bound from shoulder to shoulder.

[Great-Kazoo]

Always wanted to do a SBS with a siaga 12 and 410(for the wife). It's still on my want list along with about 12 others lol

Should have said something when you were helping us move. Could have ripped off a few rounds from the 590 in the alley.

[ChickNorris]

Nope, not little

[Great-Kazoo]

early this morning the phone did ring
Someone from the old neighborhood i think

If you're in the area drop by
come check out the casa and say hi.

Down the road an in to the clear
Who did appear
Past the stick fence and trees
Why it's
beast 556 and family.

[OtterbatHellcat]

I did get all of the relay input wires hooked up today, and three loads completed. All the lights on the front bumper are functioning properly. Five more outputs to go and the connector for the everything on the flatbed. It's really time consuming.

[Great-Kazoo]

I did get all of the relay input wires hooked up today, and three loads completed. All the lights on the front bumper are functioning properly. Five more outputs to go and the connector for the everything on the flatbed. It's really time consuming.

What shocks would you recommend for really rough roads?

[OtterbatHellcat]

Bilstein for passenger vehicles.

[Great-Kazoo]

Bilstein for passenger vehicles.

It's a work doing, heavy haulin, washboard driving, furd pick em up

[ChickNorris]

I just dropped one of my favorite words ever... you're up Kazoo.

Giggle snort

[Great-Kazoo]

I just dropped one of my favorite words ever... you're up Kazoo.

Giggle snort

But it doesn't mean what a lot of people think it means.

gassy fart

[Great-Kazoo]

Free netflix movie time, yeah.

[ChickNorris]

I fold. Good night folks.

[OtterbatHellcat]

It's a work doing, heavy haulin, washboard driving, furd pick em up

Well, I meant any normal duty passenger vehicle including 1/2-1 ton pick ups as well. Or say, unmodified stock shit that came OEM.

Bilstein.

[OtterbatHellcat]

Couldn't get the dishwasher part, Home Dickhead tomorrow to get a new dishwasher.

Gonna get some other stuff while I'm there to help my project. Need some more ratcheting tie downs too, and whatever else pops into my pea brain walking through the aisles.

[Fentonite]

Blech. Dishwashers are my least favorite appliance to install. I don’t envy that PITA. I might try to tackle repairing a dying clothes dryer soon, but that’s nothing near as crappy as a dishwasher. Good luck.

[OtterbatHellcat]

Hey Brother.... naw, I can replace it, but if we pay for the install, they take the old one away and it's done. The service they provided me in AZ was really quite good.

[OtterbatHellcat]

If your dryer isn't several decades old, you can still get parts for it...definitely give it a go.

[OtterbatHellcat]

Damn....really slow here tonight. Everyone must be getting ready for church tomorrow.

I'd go too, but my toe hurts. The devil made me say that.

[Fentonite]

It’s pretty dang old, but it’s just the motor that’s starting to go out. It tries not to start sometimes, buzzes, and I have to manually rotate the drum a bit, then it’ll start and run fine. I think the contacts are starting to go. I imagine I’ll be able to find a motor, shouldn’t be too bad. And if I get it apart and can’t fix it, it’s easy enough to replace. Hopefully, I get off my butt and fix it before it goes belly-up with a load of wet clothes in it.

[Fentonite]

But as soon as I have time to work on the dryer, I’ll probably spend that time working on the bike. I don’t typically exhibit much sense in the way I prioritize things.

[OtterbatHellcat]

You can do it.

Plan it for next weekend, get a new motor this week, have beer on hand, and order a pizza about an hour before you begin.

You're good to go.

[Fentonite]

I’m off Monday - I’ll see if I can find a motor then. For now, I’m out. Gotta work in the morning. ‘Night y’all.

[OtterbatHellcat]

Goodnight, Sir.

[Great-Kazoo]

Hey Brother.... naw, I can replace it, but if we pay for the install, they take the old one away and it's done. The service they provided me in AZ was really quite good.

You could have done the install in under 1 hour, including rewire and plumb in. That old dishwasher, call the D.A.V. they pick up for free.

[OtterbatHellcat]

DAV knowledge for the future, thank you.

[Mazin]

Should have said something when you were helping us move. Could have ripped off a few rounds from the 590 in the alley.

Probably better I didn't because you get me shooting then I won't want to do anything else. But add that to the list of reasons I miss my trips up to good old Windsor.


early this morning the phone did ring
Someone from the old neighborhood i think

If you're in the area drop by
come check out the casa and say hi.

Down the road an in to the clear
Who did appear
Past the stick fence and trees
Why it's
beast 556 and family.

Brandon moved out there?

[OtterbatHellcat]

I really have weighed some decisions I've made regarding several different aspects of "daily life/home expenditure" expenses that every homeowner is periodically faced with.

The "X" amount for the appliance you select is unavoidable, adding the cost of having delivery, installation, and removal of the old appliance at the same time, in my opinion, is most likely worth it. Can I replace a dishwasher in an hour?...yes. For $200 can I watch Felipe do it for me?...yes.

Annually speaking, $200 doesn't make or break dinner on the table or anything else for that matter.

[OtterbatHellcat]

Hey brother Mazin.

[Mazin]

Brudda mang wassup!!!!

[OtterbatHellcat]

You been winning at the table lately?

Tell me you been takin da green.

[Mazin]

OBC did that's where you need to be is enjoying your down time. Trust me I would if i could but right now my head wears many hats lol.

[Mazin]

Shit man I was just telling ray the other day we all need to get a poker night going! Maybe we all can get a bunch of misc gun crap and put it into a box and use it as a turny prize.

[Mazin]

Or $20 a buy in with re buys up until the 3rd ot so blind raise.....I'm easy.

[OtterbatHellcat]

I haven't been up to the hill for a while....the craps table has a sneaky way of "whispering" to ya once in a while.

[Mazin]

Got the chips and cards ready along with the plastic high class picnic table too [Coffee]

[Mazin]

Gotta bring your own chairs though [ROFL1]

[OtterbatHellcat]

I'd eat shit with you poker guys.